Establishment of Knowledge, Wellbeing and Innovation City (KWIN City) at Sector-2 of Phase-3, Doddaballapura & Nelamangala Taluk, Bengaluru Rural District

Establishment of Knowledge, Wellbeing and Innovation City (KWIN City) at Sector-2 of Phase-3, Doddaballapura & Nelamangala Taluk, Bengaluru Rural District

PART-A: CIVIL WORKS: Road: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mx plant carriage of mixed Material...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates ofspecified grading, premixed with bituminous binder VG-40, @ 4.5 per cent by weight ...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. with all lead and lifts complete as per specification &...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. with all l...

Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 5.4 per cent of mix and ...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. with all lead...

Construction of Median and Island above road level with approved material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compact...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade shee...

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Drain: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Utility: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Box Culvert: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification. with all lead and lifts complete as per specification &...

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). with all lead and lifts complete as per spe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...

Providing and constructing 450 mm thick size stone pitching with using 200 to 250mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all mat...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate i...

Retaining wall: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barrica...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour wi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Supplying, fitting and placing TMT Fe 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with ...

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

UGD: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barri...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...

Providing and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below: NOTE: A) External coati...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Manhole: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, b...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights, including...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Wetwell: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, c...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for pump house intake ...

Design, fabrication, supply, erection, testing and commissioning of sliding type stoplog gate consisting of skin plate, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, stif...

Design, fabrication, supply, erection and commissioning of electrically operated mono-rail hoist assembly consisting of electric motor, rope drum, gear system, wire rope with lifting attachment, festo...

Design, fabrication, supply, erection and commissioning of structural steel hoist supporting structure consisting of columns, cross beams, bracings, stiffeners, mono-rail with fixtures with all access...

Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...

Providing casing embankment using semi-pervious / pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm (before compaction) inc...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing 150mm dia. Cast Iron pipe for ventilatiing shaft 5 M high with specials and cowl and with suitable grips in CC 1:2:4 pillar using 10mm to 20mm graded hard granite, with 15 cms. th...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...

Pumping Machinery: Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) havi...

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main a...

Supplying Installing testing and commissioning electrode actuated water level transmitter of approved make with all accessories to protect against dry running of pump.

Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...

Supply, installation and commissioning of Soft Starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...

Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...

Supplying,Installing, assembling, wiring, comissioning of 1 set of Battery charger: 110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification) with DC Dis...

Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules. 4 core 10sqmm

Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules. 4 core 25sqmm

Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules. 4 core 95sqmm

Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules. 3.5 core 240 sqmm

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

Supplying and Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including ...

Supplying and Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...

Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console complete for use along with Power Factor capacitor bank...

Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...

Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications.

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifices to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ ...

Supplying,Installing,assembling,wiring,comissioning of plante type Battery set of 110 V, 200 AH.

Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...

Providing erecting and commissioning MS Dismantling joint as per requirement and department's approved drawing and specifications, including machining and rubber rings and suitable for 25 kg/cm2 worki...

Supply, installation and commissioning of High tension Power factor capacitor bank for motors operating at 6.6 KV of "&TEXT(J256,"0")&" KVAr rating with all accessories complete as per specifications...

Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...

Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...

Supplying and fixing Butterfly valve actuator DOL panel board with push button starter and all other accessories including wiring for specified number of valves etc complete with all leads and lifts.

Supplying, installing, testing and commissioning of Dewatering Pump, including cost of all materials, machinery, labour, etc., complete with all leads and lifts.(15 HP)

Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

Supply, installation and commissioning of High tension power factor capacitor bank for bus bar operating at 6.6 KV of "&TEXT(J294,"0")&" KVAr rating with all accessories complete as per specifications...

Pure water supply: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, st...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Recycled water supply: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Landscape: Providing and stacking of Tabebuia sp. of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in charge. with all lead and lifts complete as per specification &...

Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per specificat...

Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per specificatio...

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.with all lead and lifts complete as per specification ...

Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per specification & direc...

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per specification ...

Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. with all lead and lifts complete as per...

Providing and stacking of Millingtonia hortensis of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per specification & ...

Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting of wel...

Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the ...

Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand(0.0375cum), FYM(0.075cum) redearth(0.0112cum) and planting of well grown ...

Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. with all lead and lifts complete as per specificatio...

Providing and Displaying of Aglaonema Sam ht.30 cm well developed three in one, having 18 to 20 fresh, healthy and attractive colorful plant leaves in 35 cm size Earthen pot/Chali/Tray & as per direct...

Providing and Displaying Celosia well developed fresh & healthy 20 to 25 cm ht. (attractive) multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-c...

Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the o...

Providing and displaying of Spathiphyllum (peace Lilly), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot & as per direction of t...

Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. with all lead and lifts complete as pe...

Providing and Displaying of Dracaena pendanus, well developed, having 6 to 8 suckers with healthy foliage in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. with all le...

Providing and stacking of Nerium oleander variegated of height 60-75 cm., multibranched in earthen pots of size 25 cm as per direction of the officer-in-charge. with all lead and lifts complete as per...

Digging pits of size 0.45x0.45x0.45m filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand(0.007), FYM(0.014cm) redearth(0.021cm) and planting of well grown tree ...

The plants and lawns in the garden should be watered frequently as required looking to the climate, soil and plant conditions: If sprinklers are made available, it can be used other wise hose pipe can...

Providing and fixing of RCC Bollard of size 200mm dia and 1200mm height and in light beige colour as per the drawing. And also inlcude bollard light as below mentioned specification

1. Size: L1000 x W...

STREET LIGHT POLE

1. LED Outdoor Polar Pole

2. Wattage: 60W

4. Body: As per Architect/Engineer approval

5. 6000mm Height

6. Mounting: Surface-mounted (base plate type)

7. Ingress Protec...

1. Pole Height: 5000 mm (5 meters)

2. Lighting: 50W, Warm White 3000K

3. Junction Boxes: Network and Power Supply

1. CCTV Camera Suitable Housing

2. WIFI Suitable Housing

Providing and fixing of RCC seater of size 1000 x 450 x 650mm in light beige colour as per the drawing. And also provide under seat profile light as below mentioned specification

BUS STOP (SUB ARTERIAL): (1) Dimensions: 7.00 m (L) x 4.5 m (D) x 4.3 m (H), (2) Roof: RCC/precast roof slab, (3) Structure: RCC/precast concrete framework, (4) Seating: Integrated seating approx. 2.4...

1. Dimensions: Approx. 4.7 m (W) x 4.7 m (D) x 2.95 m (H)

2. Roof: RCC/precast roof slab

3. Walls: RCC/precast with smooth plaster finish (external and internal)

4. Flooring: Concrete base with ...

It is made of Stainless steel section. The section will be mounted on flat brackets on top and bottom which will be fixed using anchor bolts

12mm Toughened glass

Stainless steel clamps

Seating: Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawi...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Finishes: Square Pavers - Shot Blasted

Size - 150x150x60mm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

Artline Grass Pavers

Size - 300x300x120mm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface wi...

Supply & Application of “PLASTITRAK - ROLL ON (Two components Cold Plastic Material:- Binder and Hardener) for cycle track. with all lead and lifts complete as per specification & direction of Engi...

Supply & Application of “PLASTITRAK - ROLL ON (Two components Cold Plastic Material:- Binder and Hardener) Red and White Pedestrian Crossing with all lead and lifts complete as per specification & d...

Nalatraining works: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, bar...

Providing and filling Murrum / Gravely soil (CNS Soil ) for foundation or around pipes including cost of materials, machinery, labour, spreading ,soil in layers of 100 to 150 mm.breaking clods, wate...

Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing sto...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Effluent pipeline: Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, st...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Tree Plantation : Refilling of pits, cutting of edge of the pit on the lower side and refilling 75% or 100% of the pit as the case may be with the 29(d) excavated soll, duly breaking the clods & arra...

Re-opening of pits, of size 0.30mx0.30 mx0.30 m for replacement of casualities upto 10% casuality Replacement -40 pits in trenches

Sowing of Caesalpinia bonduc /PJ seeds/ Glyricidia /cassia slamea/ Acacia nilotica or other thorny species on the mounds of cattle proof trench or plant

Loading and unloading of Polythene / HDPE Bagged Seedlings: Loading of polythene / HDPE bagged seedlings into vehicle at the nursery site and unloading at the site nearest to the planting site- (d) Se...

Transportation: Transportation of polythene / HDPE bagged seedlings in vehicle from nursery site to planting site. (d) Seedlings raised in 8"x12" size bags. (ii)Distance from 21 to 30 km.

Conveyance: Conveyance of polythene / HDPE bagged seedlings as head loads from the dumping site to planting location near each trench / pits (distance up to 3 Km.) (d) 8x12 size bagged seedlings.

Watering polythene /HDPE bagged seedlings at planting site by dipping in water (including carrying of water) only in dry conditions of weather. (c) 8"x12" size bagged seedlings (This should be restric...

Planting of polythene / HDPE bags seedlings after tearing with blade and removing the polythene / HDPE bags in trenches / pits including scooping the soil to required depth and pressing the soil gentl...

First weeding around the plants (pits) to a radius of 60 cm. (August- Sept)

Scraping of grass and other weed growth around the plants to a radius of 60 cm (Scraping item is allowed only in grass infested areas.) (Nov-Dec)

Hoeing & soil working with pickaxe around the plant to a depth of 29 (m) 15cm. & to radius of 60 cm. so as to loosen the soil around the plants (Nov-Dec)

Protection of plantation as per the standard norms (for 25 ha, as a unit during the year and pro-rata for different extent for the actual period) 274 days

Fire Protection work in plantations: New Fire Lines: Cutting of all existing weed growth to a width of 3 m. heaping, burning and re- burning in younger plantations.

Providing & fixing quality plantation board (48"x27"x18" including painting, writing, trasportation & fixing)

Maintenance of seedlings 8"x12" till planting during 2023 rains

Raising of seedlings 8"X12" for casualty replacement during 2023-24

Re-opening of pits, of size 0.30mx0.30 mx0.30 m for replacement of casualities upto 10% casuality Replacement -40 pits in trenches

Loading and unloading of Polythene / HDPE Bagged Seedlings: Loading of polythene / HDPE bagged seedlings into vehicle at the nursery site and unloading at the site nearest to the planting site- (d) Se...

Transportation: Transportation of polythene / HDPE bagged seedlings in vehicle from nursery site to planting site. (d) Seedlings raised in 8"x12" size bags. (ii)Distance from 21 to 30 km.

Conveyance: Conveyance of polythene / HDPE bagged seedlings as head loads from the dumping site to planting location near each trench / pits (distance up to 3 Km.) (d) 8x12 size bagged seedlings.

Watering polythene /HDPE bagged seedlings at planting site by dipping in water (including carrying of water) only in dry conditions of weather. (c) 8"x12" size bagged seedlings (This should be restric...

Planting of polythene / HDPE bags seedlings after tearing with blade and removing the polythene / HDPE bags in trenches / pits including scooping the soil to required depth and pressing the soil gentl...

First weeding around the plants (pits) to a radius of 60 cm. (August- Sept)

Scraping of grass and other weed growth around the plants to a radius of 60 cm (Scraping item is allowed only in grass infested areas.) (Nov-Dec)

Hoeing & soil working with pickaxe around the plant to a depth of 29 (m) 15cm. & to radius of 60 cm. so as to loosen the soil around the plants (Nov-Dec)

Protection of plantation as per the standard norms (for 25 ha, as a unit during the year and pro-rata for different extent for the actual period) 274 days

Cleaning existing fire lines and fire tracing 3M. Wide

Re-sweeping & re-burning the above fire line.

Maintenance of seedlings 8"x12" till planting during 2023 rains

Aligning in the planting area along the contours & marking for pit (without staking)

Excavation of pits of size 0.60 m x 0.60 mm x 0.60 m x with vertically cut edges to make an uniform cube and heaping the excavated 29(c)(ii) soll outside the pits (1/3rd top soil to be deposited on th...

Raising of 8"x12" PB seedlings

ELSR: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certif...

Providing and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Labour charges for M.S ladder,final,lightening arrestor and fixing guage complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Providing and laying 100mm dia Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and...

Providing and laying 150mm dia Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and...

Providing and laying 400mm dia Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and...

Providing and fixing of 100mm Dia DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stain...

Providing and fixing of 150mm Dia DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stain...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

PART: B: WATER TREATMENT PLANT: Survey, Investigation, design, construction & commissioning of 20 MLD Water treatment Plant. The Components included in the WTP are Aerator, Flash mixer with distributo...

PART: C: ELECTRICAL WORKS: PART - A Station Breaker : Supply of 11 kV MCVCB, 500 MVA, 31.5 kA, 2000 A incomer 1250 A feeder B) Feeder Panel, complete with all lead and lift etc, as per specification a...

Supply of Annunciator Panel for the following combinations (for both MCVCB & PCVCB) 1 I/c plus 4F plus 1CB , complete with all lead and lift etc, as per specification and direction of Engineer in ch...

Control Cables: Supply of 19Core 2.5sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 10Core 2.5Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 4 core 6sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 2 core 6 sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of 4core 2.5sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Earthing name plate & DP feeder name plates including printing of letters painting and board for new earthing pits with sttck ( 1 DP earthing name plate & 1 for feeder name plate), complete ...

Supply of Rubber mats 1000mmX2000mmX12mm size tested for 15KV class, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Earth bond 450mm long , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

LABOUR CHARGES:11KV switch gear erection, allignment and fixing to the foundation, indoor /outdoor 11kv switchgear panel /unit including movement from the point of unloading to the point of erection I...

Erection of control panel, auxiliary panel, carrier cabinet, marshalling bay kiosketc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of ...

Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness 2.75Mtr long with two part clamp out of GI flat 50x6mm continuasly welded around the pipe using cast iron welding electrod...

Grounding of equipment with 50x6mm GI flat and connecting to the equipment to the earth mat / ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and ...

Supplying & providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits ., complete with all lead and lift etc, as per specification and direction of Engineer...

Removing jelly before earth excavtion & & re-spreading jelly for laying back after back filling of soil(since separate labour charge(S) for jelly removing & respreading is not available in SR, labour...

Laying of control cables from rquipment to control panels & end terminals, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Testing and commisioning: wiring: identification of wires, ferrulings, crimping & termination wiring: identification of wires, testing of realys CTs & PTs & breakers for operation ii) for each additio...

Wiring & assisting in testing & commissioning at 11KV indoor/outdoor switchgear , complete with all lead and lift etc, as per specification and direction of Engineer in charge

Wiring & assitinig in testing & commssioning at 11Kv annuacation desk for 1 no of switchgaer , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Civil portion: Extension of 11KV switch gear panel bed: Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

providing and removing centering, shuttering, strutting, propping etc and removal of form work for foundations footings, bases of columns for mass concrete including cost of all materials, labour , co...

Providing size stone masonry with hard stone in foundation & plinth with cement mortar1:6 ( 1 cement 6 coarse sand), complete with all lead and lift etc, as per specification and direction of Engineer...

Fabrication, supply & centering M S angular struss for all spans as per approved designs and drawings providing framed work, including cutting, hoisting, fixing in position and applying a priming coa...

Providing and laying to required line and slope roofing with corrogated asbeestos cement sheet 6mm thicj fixed with galvanized iron J or L hooks botls and nits 8mm dai CI plain and bitumen washers ov...

Providing and fixing structural steel work riveted, bolted or welded in bulk up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved...

Refilling and consolidation, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying and fixing chemical earthing for grounding conduits, IC cutouts & other equipments backfills compinf which is non corrosive, thermally conductive potential to permissible limts, superior fau...

Supplying and running GI/copper conductor for grounding and ( along with other wires in conduit system of wiring) using necessary suitable size clamps nails guttas/spacers etc 10SWG wire, complete wit...

PART : B: SSupplying of 11 KV (E) 3 core 400 sqmm compacted circular aluminium conductor XLPE insulated screen with semicon & copper tape screened and colour strip with pressure extruded PVC inner she...

Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor/Outdoor termination kit, complete with all lead and lift etc, as per specification and direction of Engineer in c...

Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor/Outdoor termination kit, complete with all lead and lift etc, as per specification and direction of Engineer in c...

Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of ‘B’ class 100mm dia GI pipe for culvert crossing and cable raising, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Laying of UG cable by Trench less technology by adopting horizontal baring and drawing of cables including preparation at side without HDPE pipe, complete with all lead and lift etc, as per specificat...

Labour Charges: Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading...

Laying of high tension 11 KV(E) 3 core400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff, complete with all lead and lift ...

Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...

Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type pot head (indoor / out door), complete with all lead and lift etc, as per specification and direction of Engineer in charge. a.3X300...

Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint, complete with all lead and lift etc, as per specification and direction of Engineer in charge. a. 3X300 to...

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary, complete with all lead and lift ...

PART-C: Supply of 11 kV, 3x240 Sqmm XLPE UG Cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Cable termination kit indoor HS Type Suitable for 3x240 Sqmm

Cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of Straight Through Jointing Kits HS Type suitable for 3x240 Sqmm

Cable, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying of ‘B’ class 100mm dia GI pipe for culvert crossing and cable raising, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Labour Charges: Laying of high tension 11 KV(E) 3 core 240 sqmm in existing trench/GI pipe/stone ware/ RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff, complete with ...

Making and fixing for 11 KV(E) 3 Core 240 sqmm heat shrinkable type pot head (indoor / out door), complete with all lead and lift etc, as per specification and direction of Engineer in charge. a.3X300...

Making and fixing for 11 KV (E) 3 core 240 sqmm heat shrinkable type straight through joint, complete with all lead and lift etc, as per specification and direction of Engineer in charge. a. 3X300 to ...

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary complete, complete with all lead ...

Part - D OD's & RMU's 350MVA, 630Amps: Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 5 Way RMU, 2 OD plus 3 VL (One Incomer plus Three Breakers...

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 1 OD, 350 MVA, 630 Amps, complete with all lead and lift etc, as per specification and direction of...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI strip, complete with all lead and lift etc, as per specification and direc...

Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates and at S/s, DTC's, OD's, RMU's & fencing legs, complete with all lead and lift etc, as per specification and di...

Supply of Providing Reinforecement TMT Fe 550/550 D, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...

Supplying & fixing M.S rectangular angle of size 65x65x6mm fixed in cement concrete 1:2:4 with 2 numbers of 25cm including cost of all materiasl, bending, cutting and scafolding whrerever necessary. N...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Labour portion: Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fil...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., complete with all lead and lift etc, as p...

Part E: 500KVA compact sub-station: Compact Pre - Fabricated Packaged Sub - Station 11kv/433V consisting of 3 way SF6/VCB insulated compact RMU, oil

cooled CRGO/Amoprhous Core Star - 2 Rated (5 - S...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required, complete with all lead and lift etc, as per specification and direction of Engineer in ...

Supply of Caution/Danger Board, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply and fixing of Al Lead Wire - 240 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Labour portion: Installing & fixing the compact pre-fabricated packaged sub-station with 100/250/500/800/1000 kVA transformer on the existing concrete plinth.(This does not include the cost of plinth,...

PART : F LT line using 3.5CX240sqmm LT UG Cable & Feeder pillar box: Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath 240sqmm Armoured LTUG Cable as per IS-1554 (Part...

Supply & making of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 225/240/300 Sqmm, complete with all lead and lift etc, as per specification and direction of Engineer in charge...

Supply of Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 240 Sqmm, 3.5/4 Core, complete with all lead and lift etc, as per specification and direction of Engineer i...

Supply of LT Feeder Piller Box (MS ) 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 , complete with all lead and lift etc, as per s...

Supplying Earthing materials pipe type for grounding (Single Electrode with accessories), complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Labour Charges: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 120 to 240 Sqmm , complete with all le...

Erection of LT Feeder piller box (MS ) including necessary civil works like soil excavation & concreting etc, complete with all lead and lift etc, as per specification and direction of Engineer in cha...

Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Making and fixing for 11 KV (E) 3 core 95 sqmm heat shrinkable type straight through joint, complete with all lead and lift etc, as per specification and direction of Engineer in charge. a. 3X300 to 3...

Supplying & Laying cable trays including welding, fixing of supports Cable tray of 600/1000 mm width (suitable for cable ducts Type), complete with all lead and lift etc, as per specification and dire...

Providing Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification PTZ Camera Specification: (1) Lens type: Auto focus with Optical Zoom of 30...

PART: G LED STREETLIGHTS : Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel (except 2Cx10Sq.mm wire armoured) confirming to IS-3975:...

Laying of cable in Existing Trench/GI pipe/ Stone Ware/RCC Hume pipe using Wooden/ Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 16 Sqmm , complete with all lead and lift etc...

Supplying of GI Pipe B - Class as per IS-1239 GI Pipe - 40 mm Dia , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws, complete with all lead and ...

Supplying and fixing angle iron frame work fabricated out of MS angle iron..and MS flat…with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint, complete...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. with all lead and lifts complete as per specifications. 16 Amps , complete w...

Supply and fixing of a. GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg b. Good Quality well burnt ...

Supplying of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW), complete with all lead and lift etc, as per spe...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete with all lead and lift etc, as per spe...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete with all lead and lift etc, as per spe...

Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with h...

Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with h...

Fixinghalogen/metal halide /SVL/IL/LEDfloodlight fittingover existingpole/wallceilingincluding clamps,bolts,nutsandwiring using suitable capacity wires, complete with all lead and lift etc, as per spe...

Supplying Heavy Duty Copper Terminal Long Barrel with all lead and lifts complete as per specifications 25 Sqmm Copper Terminal Apprx Wt: 11 Gm, complete with all lead and lift etc, as per specificati...

Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood/ panel board using necessary screws, bolts, nuts, necessary phase separators ,handle and wiring complete. Protection of...

Cable trench excavation, complete with all lead and lift etc, as per specification and direction of Engineer in charge. Ordinary soil.

Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site Normal soil 5/6'' Bore, complete with all lead and lift etc, as per s...

Earth work excavation for Street light pole or RMU foundation and other works 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr. Depth upto 1....

Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Providing Reinforecement TMT Fe 550/550D, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply and Fixing of PVC Pipe as per IS-2509 PVC PVC Pipe - 32 mm Dia, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supply and laying HDPE Pipe 50/42 mm, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Intelligent Light Monitoring System (ILMS) for street lights consisting of supply and erection of single phase / three phase smart streetlight control and monitoring system to remotely control and mon...