CW7 Strengthening of National Institute of Post Harvest Technology Talegaon Dabhade Taluka Maval District Pune

Civil work

ROAD AND PARKING

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (SSR 2021-22, Item Number2.11, Page Number23, Additional specification MORTH 301)

Excavation for road way in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (SSR 2021-22, Item Number2.13, Page Number23, Additional specification MORTH 301)

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and sides lopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (SSR 2021-22, Item Number2.16, Page Number23, Additional specification MORTH 301)

Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50m, not less than 97% of standard Proctor density after laying the min layers of 20cm.to30 cm. with vibratory roller. (SSR 2021-22, Item Number2.23, Page Number24, Additional specification MORTH 305)

Providing earthwork in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97% of standard proctor density etc. complete.(Material obtained from departmental Land) (SSR 2021-22, Item Number2.27, Page Number24, Additional specification MORTH 305)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 2021-22, Item Number2.29a, Page Number24, Additional specification MORTH 408)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete . (SSR 2021-22, Item Number2.30, Page Number24, Additional specification MORTH 408)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. (SSR 2021-22, Item Number2.31, Page Number24, Additional specification MORTH 408)

Providing dry rubble stone pitching 23 cm (about 9 ) thick including all material, quarry spalls, labour etc. complete. As directed by Engineer in charge Square Metre (SSR 2021-22, Item Number2.34, Page Number25, Additional specification : As directed by engineer incharge.)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) (SSR 2021-22, Item Number3.18, Page Number27, Additional specification MORTH 404)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) (SSR 2021-22, Item Number3.19, Page Number27, Additional specification MORTH 404)

Providing and constructing 75mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing roadsurface, spreading 40mm. stone metal layers 30% crusher broken metal+70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @2Kg/Square Meter, spreading 12mm. size chips compacting with three wheel staticroller having weight 8 to 10MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30bulkbitumen rates are considered to arrive at rates) (SSR 2021-22, Item Number3.35a, Page Number29, IRC-SP-20, 2002 Clause Number 8.7.3)

Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 2 kg / Square Meter , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Square Meter on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2021-22, Item Number3.36a, Page Number29, Additional specification :- IRC-SP-20, 2002 Clause Number 8.7.3)

BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2020-21, Item Number3.42, Page Number30)

BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading1 ,premixed with bituminous binder @5.20 percent by weight of total mix and filler, transported to site with VTS, laid over apreviously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/ tackcoat. For Bitumen of specified grade--USING Batchmix type hotmix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dustfiller.(VG-30 bulk bitumen rates are considered to arrive at rates) (SSR2021-22, Item Number3.48, Page Number40, Additional specification MORTH 509)

Providing bituminous TypeA liquid seal coat on bituminous surface including supplying all material sand bitumen of specified grade preparing existng road surface, heating and applying [email protected] KgSquare Meter by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2021-22, Item Number4.01, Page Number32, Additional specification MORTH 510)

Conveying materials obtained from excavation including all lifts, and lead of for 2.00 Km .including transport Loading and unloading and as required and as directed. ( SSR 2021-22, Statemaet C-1, Page Number397)

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. (SSR2021-22, Item Number5.19, Page Number51, Additional specification RD)

Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over/Upto 10 cm wide) (MORTH-803) on new surface. (SSR 2020-21, Item Number6.08a, Page Number39, Additional specification MORTH 801)

Providing and fixing informatory sign boards in square or rectangular shape of size 1.80m x1.20m made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 5 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Aluminum composite panel with Type IV High Intensity Micro-Prismatic Grade Sheeting.(SSR 2021-22, Item Number6.46, Page Number78, Additional specification Bd.U.1 Page Number537) (SSR 2021-22, Item Number6.46, Page Number78, Additional specification Bd.A.1 )

Providing and fixing informatory sign boards in rectangular shape of size 1.20m x 0.90m made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 3 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Aluminum composite panel Type IV High Intensity..(SSR 2021-22, Item Number6.57, Page Number85, Additional specification Bd.U.1 Page Number537) (SSR 2021-22, Item Number6.57, Page Number85, Additional specification Bd.A.1 Page Number259)

Providing and laying filter material underneath pitching in slopes as per drawings and technical specifications etc. complete.(SSR 2021-22, Item Number14.74, Page Number129, Additional specification : As directed by engineer incharge.)

Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching / cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching etc. complete..(SSR 2021-22, Item Number14.75, Page Number176, Additional specification : As directed by engineer incharge.)

Providing and laying in situ/ready mix M-20 cement concrete Trap /Granite/ Quartzite/ Gneiss metal for R.C.C. well curbs including necessary compacting by vibrating, finishing and curing complete. with fine agreegate sofrequired specifications (Naturalsand/ VSI sand finely washed etc) (excluding reinforcement and including shuttering) A) With Batch Mix Plant With fully automaticmic roprocessor based PLC with SCADA enabled(SSR 2021-22, Item Number17.14, Page Number162, Additional specification MORTH 404)

BUILDING WORK

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR 2021-22, Item Number21.02, Page Number115, Additional specification Bd.A.1 Page Number259)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR 2021-22, Item Number21.06, Page Number115, Additional specification Bd.A.2,Page Number259)

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means (SSR 2021-22, Item Number21.10, Page Number115, Additional specification Bd.A.3 Page Number259)

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means (SSR 2021-22, Item Number21.14, Page Number116, Additional specification Bd.A.2, Page Number259)

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m) By Mechanical Means (SSR 2021-22, Item Number21.20, Page Number199, Additional specification Bd.A.6 Page Number260)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (SSR 2021-22, Item Number21.22, Page Number116, Additional specification Bd.A.5 Page Number260)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (SSR 2021-22, Item Number21.24, Page Number117, Additional specification as directed by Engineer incharge)

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete. (SSR 2021-22, Item Number21.34, Page Number117, Additional specification as directed by Engineer incharge)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. (SSR 2021-22, Item Number21.36, Page Number117, Additional specification Bd.A.10 Page Number 262)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR 2021-22, Item Number21.37, Page Number117, Additional specification Bd.A.11 Page Number 263)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR 2021-22, Item Number21.38, Page Number117, Additional specification Bd.A.12 Page Number 264)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc complete. (SSR 2021-22, Item Number21.40, Page Number118, Additional specification Bd.A.12 Page Number 264)

Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mildsteel plated, angle brackets, cleats, gussetplates, anchorbolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two.coats of oil painting approved quality and shade etc. complete.(SSR 2021-22, Item Number23.03, Page Number129, Additional specification Bd.C.12 Page Number 277)

Ground Floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc (SSR 2021-22, Item Number24.01, Page Number131, Additional specification Bd.E.1 Page Number 287)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number24.04, Page Number131, Additional specification Bd.E.2 Page Number131 and B.7 Page No 38)

Providing and laying Cast in situ /Ready Mix cement concrete in M-20 of trap /granite /quartzite /gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finish in gun even and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honeycombed surface,only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number24.06, Page Number131, Additional specification Bd.E.2 Page Number131 and B.7 Page No 38)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number25.13, Page Number133, Additional specification Bd.C.12 Page Number 275)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number25.33, Page Number134, Additional specification Bd.F.3 Page Number134 and B.7, PageNumber38)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number25.52, Page Number135, Additional specification Bd.F.6 Page Number 135 and B.7, Page Number38)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc (SSR 2021-22, Item Number25.72, Page Number136, Additional specification Bd.F.8 Page Number136 and B.7, Page Number38)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR 2021-22, Item Number26.07, Page Number239, Additional specification Bd.F.9 Page Number303 and B.7, Page Number38)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)(SSR 2021-22, Item Number26.19, Page Number240, Additional specification Bd.F.11 Page Number304 and B.7, Page Number 38)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks,laying/ pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc. (SSR 2021-22, Item Number26.23, Page Number240, Additional specification Bd. F. 12 Page Number138 and B-7, Pg 38)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR 2021-22, Item Number26.33, Page Number245, Additional specification Bd.F.17, Page Number306)

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. (SSR 2021-22, Item Number27.12, Page Number144)

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. (SSR 2021-22, Item Number27.13, Page Number144)

Ground floor

First floor

Providing uncoursed rubble masonry of trap/ granite/ quartzite /gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc. complete. (SSR 2021-22, Item Number28.01, Page Number146, Additional specification Bd.H.1 Page Number329)

Providing uncoursed rubble masonry of trap/ granite/ quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. (SSR 2021-22, Item Number28.04, Page Number146, Additional specification Bd.H.4 Page Number331)

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. (S.S.R.2021-22, I.Number31.04. P.Number263. Additional Specification As directed by Engineer in charge)

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. (SSR 2021-22, Item Number31.05, Page Number150, Additional specification As directed by engineer incharge)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Meter /kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (SSR 2021-22, Item Number31.09, Page Number264, Additional specification As directed by engineer incharge)

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) (SSR 2021-22, Item Number31.13, Page Number151, Additional specification Bd.J.2 Page Number355)

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. (SSR 2021-22, Item Number32.02, Page Number153, Additional specification Bd.L.1 Page Number367)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR 2021-22, Item Number32.03, Page Number153, Additional specification Bd.L.2 Page Number367)

Ground foor

First floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR 2021-22, Item Number32.11, Page Number153, Additional specification Bd.L.7 Page Number369)

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. (SSR 2021-22, Item Number32.17, Page Number153, Additional specification Bd. L.15 Page Number372)

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. (SSR 2021-22, Item Number32.21, Page Number154, Additional specification As directed by Engineer in charge.)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. (S.S.R.2021-22 Item No 32.26 P.Number270, additional spec Number As directed by Engineer in Charge)

Providing and applying plaster / wall punning with plaster of paris (with plaster of paris material of Ambuja / Mor Chap or equivalent make ) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc complete. (SSR 2021-22, Item Number32.30, Page Number154, Additional specification As directed by Engineer in charge.)

Ground foor

First floor

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (SSR 2021-22, Item Number32.34, Page Number271, Additional specification As directed by Engineer in charge.)

Ground foor

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (SSR 2021-22, Item Number33.08, Page Number274, Additional specification Bd.M.3 Page Number380.)

Providing and laying ceramic tiles of having size 30cm.x30cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete.(SSR 2021-22, Item Number33.25, Page Number277, Additional specification Bd.M.13 Page Number386.)

Providing and laying ceramic tiles having size 30cm.x60cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colourcement slurry cleaning curing etc. complete.(SSR 2021-22, Item Number33.27, Page Number158, Additional specification Bd.M.13 Page Number386..)

Ground foor

First floor

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring (SSR 2021-22, Item Number33.28, Page Number158, Additional specification As directed by Engineer in charge..)

Ground foor

First floor

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. (SSR 2021-22, Item Number33.30, Page Number158, Additional specification As directed by Engineer in charge..)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc complete (SSR 2021-22, Item Number33.35, Page Number278, Additional specification Bd.M. 22/PageNumber 390.)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc.complete. (SSR 2021-22, Item Number33.42, Page Number279, Additional specification Bd.M.12 Page Number385.)

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete . (SSR 2021-22, Item Number33.43, Page Number279, Additional specification Bd.M.12 Page Number385.)

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (SSR 2021-22, Item Number33.51, Page Number160, Additional specification : A directed by Engineer in charge )

Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete(SSR 2021-22, Item Number33.66, Page Number161, )

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (SSR 2021-22, Item Number33.67, Page Number161, Additional specification : Bd. M-12 page Number385 )

Ground foor

First floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Numbering/ moulding the sharp edges wherever necessary, curing, etc. complete. (SSR 2021-22, Item Number33.68, Page Number161, Additional specification As directed by engineer incharge )

Ground foor

First floor

Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). (SSR 2021-22, Item Number35.04, Page Number164, Additional specification :- Bd.O.5 Page Number 405)

Ground foor

Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete.(SSR 2021-22, Item Number35.08, Page Number164, Additional specification As directed by Engineer in charge. )

Ground foor

First floor

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.(SSR 2021-22, Item Number35.12, Page Number164, Additional specification :- Bd.O.5 Page Number 405)

Ground foor

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (SSR 2021-22, Item Number35.14, Page Number164, Additional specification As directed by engineer incharge )

Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. (SSR 2021-22, Item Number35.20, Page Number165, Additional specification As directed by Engineer in charge. )

Ground floor

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR 2021-22, Item Number35.21, Page Number165, Additional specification As directed by Engineer in charge. )

Ground floor

First floor

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. (SSR 2021-22, Item Number35.23, Page Number165, Additional specification As directed by Engineer in charge. )

Ground floor

First floor

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. (SSR 2021-22, Item Number35.24, Page Number288, Additional specification As directed by Engineer in charge. )

ground floor

first floor

Second floor

Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in-charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. (SSR 2021-22, Item Number35.29, Page Number166, Additional specification As directed by engineer incharge )

Ground Floor

First floor

Second floor

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger /Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% (SSR 2021-22, Item Number36.20, Page Number292, Additional specification As directed by engineer incharge )

Ground Floor

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (SSR 2021-22, Item Number36.03, Page Number290, Additional specification :- Bd. P. I Page Number 411)

Ground floor

First floor

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger /Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% (SSR 2021-22, Item Number36.20, Page Number292, Additional specification As directed by engineer incharge )

Ground Floor

First floor

Second floor

Providing and fixing colour coated Zincalume ( R ) AZ150 (min 150 gms/Square Meter total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R steel quality super durable polyester paint coat (with inorganicpigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/Square Meter) (SSR 2021-22, Item Number38.34, Page Number302, Additional specification As directed by engineer incharge )

Ground Floor

First floor

Furniture works

Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc all complete (SSR 2021-22, Item Number38.51, Page Number312, Additional specification As directed by engineer incharge)

Ground floor

First floor

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 kg/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 kg/m suspended on 6 mm dia mild steel rod weighing 0.22 kg/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 kg/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.(SSR 2021-22, Item Number38.52, Page Number312, Additional specification As directed by engineer incharge)

Ground floor

First floor

Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. (SSR 2021-22, Item Number39.06, Page Number314, Additional specification :- As directed by engineer incharge)

Ground floor

First floor

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed draing consisting panelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer incharge including 3 coats of oil painting etc. complete (SSR 2021-22, Item Number39.07, Page Number179, Additional specification :- As directed by engineer incharge)

Ground floor

First floor

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) (SSR 2021-22, Item Number39.25, Page Number181, Additional specification BD-T-55 Page Number510 )

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Running meter and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Running meter Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Running meter The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Running meter Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Running meter And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Running meter and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Running meter As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. (SSR 2021-22, Item Number39.37, Page Number330, Additional specification As directed by engineer incharge)

Ground floor

First floor

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Running meter with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Running meter. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Running meter The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Running meter Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Running meter and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Running meter As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box (SSR 2021-22, Item Number39.41, Page Number184, Additional specification As directed by engineer incharge)

Ground floor

First floor

Second floor

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 Number ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 Number M.S.powder coated but hinges of(SSR 2021-22, Item Number39.47, Page Number186, Additional specification As directed by engineer incharge)

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. (SSR 2021-22, Item Number39.48, Page Number186, Additional specification As directed by engineer incharge)

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) With powder coating. (SSR 2021-22, Item Number39.53, Page Number187, Additional specification : As directed by engineer incharge)

Ground floor

First floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.(SSR 2021-22, Item Number39.68, Page Number188, Additional specification : As directed by engineer incharge)

Providing and fixing mild steel grill work for windows, ventilators etc 20 kg/Square Meter as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (SSR 2021-22, Item Number40.01, Page Number192, Additional specification Bd.U.1 Page Number537)

Ground floor

First floor

Providing and fixing 900 mm high S.S.304 Grade stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete. (SSR 2021-22, Item Number40.07, Page no192, Additional specification Bd.U.1 Page Number537)

Ground floor

First floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) (SSR 2021-22, Item Number40.08, Page Number192, Additional specification Bd.U.1 Page Number537)

Providing and fixing mild steel grill railing weighing 20kg/Square Meter with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete/other surface, erecting the grillwork, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. Number : As directed by Engineer in charge.(SSR 2021-22, Item Number40.11, Page Number193, Additional specification As directed by Engineer in charge)

WATER SUPPLY AND SANITARY WORK

Providing and laying in trenches 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes? of 3.68 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.(SSR 2021-22, Item Number41.22, Page Number196, Additional specification Bd.U.1 Page Number537)

Ground floor

First floor

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. (SSR 2021-22, Item Number41.40, Page Number196, Additional specification Bd.V.8 Page Number554)

Ground floor

First floor

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. (SSR 2021-22, Item Number41.44, Page Number197, Additional specification Bd.V.9 Page Number555)

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. (SSR 2021-22, Item Number41.45, Page Number197, Additional specification Bd.V.9 Page Number555)

Providing and laying 100 mm dia. half round white glazed earthenware pipes in 1:5:10 cement concrete bedding including bends, etc. complete. (SSR 2021-22, Item Number41.62, Page Number198, Additional specification Bd.V.29 Page Number565)

Providing and fixing coloured glazed earthenware Wash Hand Basin of 63 cm x 45 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and bothsides of platform raised with two vertical granite supports 15 cmheight and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) (SSR 2021-22, Item Number41.78, Page Number199, Additional specification :As directed by Engineer in charge.)

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.(SSR 2021-22, Item Number41.80 Page Number199, Additional specification :Bd.V.32 Page Number567)

Ground floor

First floor

Providing and laying 100mm diameter half round salt glazed stoneware pipes in brick masonry including fittings such as bends, tees, single junction, necessary excavation and jointing complete. (SSR 2021-22, Item Number42.01, Page Number200, Additional specification :Bd.V.32 Page Number571)

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (SSR 2021-22, Item Number42.02, Page Number200, Additional specification : Bd.V.41, Page Number 573.)

Ground floor

First floor

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars,excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (SSR 2021-22, Item Number42.08, Page Number200, Additional specification : Bd.V.41, Page Number 573.)

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars,excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (SSR 2021-22, Item Number42.09, Page Number200, Additional specification : Bd.V.41, Page Number 573.)

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) (Item Number42.18, Page Number352, Additional specification : Bd.V.43, Page Number 575.)

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. (Item Number42.19, Page Number352, Additional specification : Bd.V.43, Page Number 576.)

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete (SSR 2021-22, Item Number42.12, Page Number200, Additional specification : Bd.V.43, Page Number 574.)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete (SSR 2021-22, Item Number42.13, Page Number352, Additional specification : Bd.V.43, Page Number 574.)

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. (SSR 2021-22, Item Number42.20' Page Number353, Additional specification : Bd.V.43, Page Number 574.)

Ground floor

First floor

Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.27, Page Number202, Additional specification : As directed by engineer incharge)

Providing, laying and fixing P.V.C. pipe of 110 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.28, Page Number202, Additional specification : As directed by engineer incharge)

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.(SSR 2021-22, Item Number42.31, Page Number202, Additional specification : As directed by engineer incharge)

Ground floor

First floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.(SSR 2021-22, Item Number42.33, Page Number202, Additional specification : As directed by engineer incharge)

Ground floor

First floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR 2021-22, Item Number42.51, Page Number358, Additional specification : As directed by engineer incharge)

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR 2021-22, Item Number42.52, Page Number358, Additional specification : As directed by engineer incharge)

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.55, Page Number358, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.56, Page Number358, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.57, Page Number359, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2021-22, Item Number42.59, Page Number359, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. (SSR 2021-22, Item Number42.60, Page Number359, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) (SSR 2021-22, Item Number42.68, Page Number360, Additional specification : As directed by engineer incharge.)

Providing and fixing reinforced cement concrete cover of size 60 cm x45 cm with frame over inspection chamber etc. complete.Medium duty (100 kg)(SSR 2021-22, Item Number42.71, Page Number360, Additional specification : As directed by engineer incharge.)

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.(SSR 2021-22, Item Number42.79, Page Number361, Additional specification : As directed by engineer incharge.)

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.(SSR 2021-22, Item Number42.80, Page Number361, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.(SSR 2021-22, Item Number42.82, Page Number361, Additional specification : As directed by engineer incharge.)

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with coverplate 32mm size of approved make including soil pipe, ventpipe upto outside face of wall, 100mm dia.G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete..(SSR 2021-22, Item Number42.86, Page Number363, Additional specification : As directed by engineer incharge.)

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc.complete.(SSR 2021-22, Item Number42.87, Page Number363, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )(SSR 2021-22, Item Number42.88, Page Number363, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Providing and fixing European type white glazed earthenware water closet pan with UPVCseat and lid with chromium plated brass hinges and rubber buffers including UPVCand vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)(SSR 2021-22, Item Number43.19, Page Number368, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.(SSR 2021-22, Item Number48.31, Page Number402, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Dismantling brickmasonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc . complet. (SSR 2021-22, Item Number46.09, Page Number377, Additional specification : As directed by engineer incharge.)

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.(SSR 2021-22, Item Number46.15, Page Number378, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. (SSR 2021-22, Item Number46.16, Page Number378, Additional specification : As directed by engineer incharge.)

Ground floor

First floor

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR 2021-22, Item Number46.19, Page Number378, Additional specification : As directed by engineer incharge.)

Ground floor

First floor

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them with in the specified lead as directed etc. complete. (SSR 2021-22, Item Number46.29, Page Number379, Additional specification : As directed by engineer incharge.)

Ground floor

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking these rviceable materials as and where directed including throwing the unserviceable materials outside etc.complete(SSR 2021-22, Item Number46.40, Page Number380, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Removing W.C. pans including disconnecting the sanitary and watersupply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking theser viceable materials as and where directed including throwing the unserviceable mateiasls outside etc. carefully and throwing out there fusal outside etc. complete.(SSR 2021-22, Item Number46.41, Page Number380, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Replacement of damaged alluminium Butt Hinges of 125 mm of approved quality and maket odoor shutter including removing existing the same in original psition making proper adjustment for smooth operation etc.complete as per sample approved by Engineer incharge.(SSR 2021-22, Item Number46.46, Page Number382, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Replacement of damaged Mortise Lock of approved quality and maket odoor shutter including Removing and Refixing with Necessary screw, making proper adjustment for smooth operation etc.complete as per sample approved by Engineer in-chareg.(SSR 2021-22, Item Number46.47, Page Number382, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and maket odoor shutter including removing existing the same in original postion making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.(SSR 2021-22, Item Number46.48, Page Number382, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and maket door/window shutter in cluding removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.(SSR 2021-22, Item Number46.50, Page Number382, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Removing chocke sand leakages from downtake G.I/CI/PVC pipe line on walls floor level by using zoola/scaffolding and rectify the same for functioning with all lifts etc. complete.(SSR 2021-22, Item Number46.53, Page Number382, Additional specification : As directed by engineer incharge.)

Ground floor

First floor

Waterproofing Treatment to existing Toilet and bathrooms by using Polymeric cementitious membrane of approved make & approved by Engineer in charge and replacing the existing waterproofing treatment. Break open the existing I.P.S. and brick bat coba of the toilet and bathroom areas to expose the bare slab. (If there are cracks on the bare slab open the crack in V Groove and fill it with P.M.M. and if there are lots of honeycombs and identified bad patches of concrete the same should be grouted by grouting procedures). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric waterproofing coating having a breathable non toxic charge over this waterproofing treatment, provide and lay brick bat acrylic polymer liquid of approved make & approved by Engineer in coba of average 112 mm thickness.(SSR 2021-22, Item Number50.02, Page Number405, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

Providing & Fixing in position, Acoustical Panelling made from 12mm wp Plywood & 1.5 mm laminate on, 50x50mm Salwood frame of 600 x 600 ctoc having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings/finishing items /paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete (SSR 2021-22, Item Number51.04, Page Number456, Additional specification As directed by engineer incharge)

Ground floor

Shutter :Providing of 65mmthick Accoustic Door Shutters with wooden structure comprising of Chemical treated internal timber with antitermite chemicals in pressure impregnation vessels under 160PSI pressure as perIS:401 and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x48mm with48mm thick infill of ceramic vermiculite mix of density54Kgs/CMT ,3mm sheet rubber interlayer sheet on one side for acoustic property ,faced with 6mm High Density Waterproof Plyconfirming to ISCode2201 ,internally lipped with hardwoodbeading ,and pasted in Hydraulic Pressunder 50tonnespressure ,spray quoted with 2coats of PU paint of minimum 200micron of color of engineer choice (any Veneer or Lamination will cost extra ) ,without any external lipping along with double rebatting inshutters & accoustic seal. (SSR 2021-22, Item Number51.05, Page Number456, Additional specification As directed by engineer incharge)

Ground floor

Providing & fixing inposition Stage flooring Made from 18mmplywood 1200 x 2400 & 18mm Teakwood planks 100x800 having tongue & grove on Sal-wood frame of 50x100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings/finishing-items/polishetc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects..including all materials labour,finishing etc complete (SSR 2021-22, Item Number51.06, Page Number456, Additional specification As directed by engineer incharge)

Ground floor

Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required CutOuts, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete(SSR 2021-22, Item Number51.09, Page Number457, Additional specification As directed by engineer incharge)

Ground floor

Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4mm thick ACP sheet material consisting of 3mm thick F grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTME 11912 and BS476 part 6 and 7 class O) sand witched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA 3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF / Lumiflon based fluropolymerres in(having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc .overall weight of the ACP shall not be less than 7.5 kg/Square Meter) (SSR 2021-22, Item Number51.10, Page Number457, Additional specification :As directed by Engineer in charge.)

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete (SSR 2021-22, Item Number51.13, Page Number458, Additional specification : As directed by engineer incharge.)

Ground floor

First floor

Second floor

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)(SSR 2021-22, Item Number51.19, Page Number459, Additional specification As directed by engineer incharge)

Ground floor

First floor

Second floor

Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, (SSR 2021-22, Item Number51.26, Page Number461, Additional specification : As directed by engineer incharge.)

chair : Furniture 51.42 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5- prong/Nylon Base with Leather Upholstery (SSR 2021-22, Item Number51.42, Page Number466, Additional specification : As directed by engineer incharge.)

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat As directed by Engineer-in-charge Number 39612(SSR 2021-22, Item Number51.53, Page Number477, Additional specification : As directed by engineer incharge.)

Furniture Dressing Table @400LX 400DX 1800H Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker. (SSR 2021-22, Item Number51.56, Page Number479, Additional specification : As directed by engineer incharge.)

Directional signage Design, supply, fabrication and fixing acrylic multi lingual Braille (raiseddots) directional signboards of size 6"x9" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic nonglare cut out ltters of height 15 mm raised not less than 0.8 mm above base plate and thee quivalent word written in Hindi with Devnagri non glare acrylic letters of heigt 15 mm raised not less than 0.8mm above base plate and having anonglare acrylic cutar rowpointing in there quired direction. Each sign board to be fixed as per manufacturers specifications on the wall at the approved location and at aheight of 1200 mm from FFL and as per the directions by the engineer in charge(SSR 2021-22, Item Number51.67, Page Number456, Additional specification : BD.V 5 page 551 and as directed by Engineer in charge)

Ground floor

First floor

ELECTRICAL

Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (PWD electrical SSR -2021-12 Specification Number 1-1-9 )

Supplying and erecting PVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. (PWD electrical SSR -2021-22 Specification no 1-2-10)

Supplying & erecting mains with 3x2.5 Square Meterm FRLHS copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW (PWD electrical SSR -2021-22 Specification Number1-3-12 )

Supplying & erecting mains 2x1.5 Square Meterm. and earth wire 1.5 Square Meterm FR PVC copper wire, ISI mark HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC. (PWD electrical SSR -2021-22 Specification Number1-6-1)

Supplying & erecting mains with 2x2.5 Square Meterm. and earth wire 1.5 Square Meterm FR PVC copper wire, in HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC. (PWD electrical SSR -2021-22 Specification Number1-6-3 )

Supplying and erecting ISI mark modular type switch 16 / 20A with indicator, duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification Number1-8-6 )

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification Number1-8-11 )

Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical DSR -2021-22 Specification Number1-8-14)

Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification Number1-8-15)

Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification no 1-8-17)

Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification no 1-8-23)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. (PWD electrical SSR -2021-22 Specification Number1-8-35)

Supplying and erecting PVC Surface modular double mounting plate 1 module complete duly erected in an approved manner.(PWD electrical SSR -2021-22 Specification Number1-8-46)

Wiring for plug on board with Switch socket concealed type and copper wiring, earthing and with modular accessoriesas per specification No: WG-PW/CW (PWD electrical SSR -2021-22 Specification Number1-9-14)

Point wiring for light/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n caping with 1.5 Square Meterm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW (PWD electrical SSR -2021-22 Specification Number1-9-15)

Point wiring in PVC trunking (casing-capping) with 1.5 Square Meterm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW (PWD electrical SSR -2021-22 Specification Number1-9-16)

Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 Square Meter (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW (PWD electrical SSR -2021-22 Specification Number1-9-18)

Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification Number WG-TW (PWD electrical SSR -2021-22 Specification Number1-10-1)

Supplying & installing Co-axial cable low voltage grade RG-11 as per specification Number WG-TW (PWD electrical SSR -2021-22 Specification Number1-10-18)

Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working as per specification Number WG-COC/NC (PWD electrical SSR -2021-22 Specification Number1-12-1)

Supplying and fixing 1 meter length, UTP Patch cord of Cat 6 type in position as per specification Number WG-COC/PC (PWD electrical SSR -2021-22 Specification Number1-12-8)

Dismantling the existing light, fan, bell, clock, independent plugpoint, wiring including circuit mains of all types along with accessories etc.complete as per specification No:WG-DM/PW (PWD electrical SSR -2021-22 Specification Number1-15-1) independent plugpoint, wiring including circuit mains of all types along with accessories etc.complete as per specification No:WG-DM/PW

Supplying & erecting approved type suspension type decorative fitting with rise /fall arrangement, 1 light inside semi circular metallic reflector with counterweight with guide pulley / spring buffer with work shop type copper flexible wire complete with necessary hook, if required (PWD electrical SSR -2021-22 Specification Number2-2-12)

Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FGODF/ FLS2. (PWD electrical SSR -2021-22 Specification Number2-5-4)

Supplying and erecting LED square / circular 13 to 15W downlighterhaving pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. (PWD electrical SSR -2021-22 Specification Number2-1-4)

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/ FLS-2. downlighterhaving pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. (PWD electrical SSR -2021-22 Specification Number2-5-5)

Supplying and erecting Corridor/Passage light fitting ( 2 feet) including 9W LED lamp, Comprises of Extruded channel in Plastic Silver grey Color & With same Plastic end cap on provided PVC block / wooden board..(PWD electrical SSR -2021-22 Specification Number2-1-19)

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete( including lamp). (PWD electrical SSR -2021-22 Specification Number2-5-23)

Supplying and erecting LED Flood light fitting of 30-40W,including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No FG-ODF/FLS-2 (PWD electrical SSR -2021-22 Specification Number2-5-12)

Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specifcation Number FG-FN/CF (PWD electrical SSR -2021-22 Specification Number2-12-21)

Supplying and erecting Exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400RPM with condensor complete erected in position with necessary materials. Fanmotor with moisture proof treatment and ‘E’ class insulation and marking Sr. Number & date of erction. (PWD electrical SSR -2021-22 Specification Number2-12-15)

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 Number of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification Number APAC/ SAC Each 45059 2048 4710(PWD electrical SSR -2021-22 Specification Number 3-2-8)

Supplying, installing, testing and commissioning split type variable speed inverter technology room Airconditioning unit 1 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 Number of air handling unit hi-wall mounting type complete with refrigerant R410A/R32 and copper condensor at position. specification NumberAPAC/ SAC (PWD electrical SSR -2021-22 Specification Number 3-2-10)

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete. (PWD electrical SSR -2021-22 Specification Number 3-2-15)

Supplying & erecting On line UPS pure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification Number AP-UPS (PWD electrical SSR -2021-22 Specification Number 3-7-4)

Supplying and erecting Electomeric nitrile rubber/ Foam tube type sleeves for overcoating and insulating on provided PC/ Copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar system/ Air conditioning (PWD electrical SSR -2021-22 Specification Number 4-2-14)

Supplying and erecting ON LOAD four pole automatic transfer switch suitable for 415V, 160A, 50 Hz capacity with enclosure, automatic/manual inbuilt time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron / GI frame and connected with provided leads complete. (PWD electrical SSR -2021-22 Specification Number 5-1-33)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification Number SW-SWR/MCB (PWD electrical SSR -2021-22 Specification Number 5-3-3)

Supplying, erecting & marking DPMCB 40A to 63A, Cseries (for motor/power) in provided distribution board as per specification NumberSW-SWR/MCB (PWD electrical SSR -2021-22 Specification Number 5-3-8)

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification Number SW-SWR/MCB (PWD electrical SSR -2021-22 Specification Number 5-3-15)

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification Number SW-SWR/MCB (PWD electrical SSR -2021-22 Specification Number 5-3-17)

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification Number SW-SWR/MCBDB (PWD electrical SSR -2021-22 Specification Number 5-4-7)

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP /TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification Number SW-SWR/MCBDB (PWD electrical SSR -2021-22 Specification Number 5-4-11)

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification Number SWSWR/ MCBDB (PWD electrical SSR -2021-22 Specification Number 5-4-18)

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complet (PWD electrical SSR -2021-22 Specification Number 5-4-23)

Providing & erecting 3 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification Number SW-SWR/MCCB (PWD electrical SSR -2021-22 Specification Number 5-5-3)

Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification Number SW-RCCB/RCCB (PWD electrical SSR -2021-22 Specification Number 5-6-1)

Providing, erecting & commissioning RCCBonly of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A 2 pole complete as per specification Number SW-RCCB/RCCB (PWD electrical SSR -2021-22 Specification Number 5-6-2)

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification Number SWRCCB/ RCCB (PWD electrical SSR -2021-22 Specification Number 5-6-5)

Supplying and erecting SS enclosure for MCCB suitable for 125A to 200A MCCB complete. (PWD electrical SSR -2021-22 Specification Number 5-11-18)

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification Number CB-LT/AL (PWD electrical SSR -2021-22 Specification Number 7-1-17)

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs,on wall/trusses/pole or in provided trench/ pipe as per specification Number CB-LT/AL (PWD electrical SSR -2021-22 Specification Number 7-1-27)

Supplying & laying (including excavation) 15 cm dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). (PWD electrical SSR -2021-22 Specification Number 7-6-6)

Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq. mm. /2 to 4 core 10 sq. mm. for XLPE armoured cable as per specification Number CB-GL (PWD electrical SSR -2021-22 Specification Number 7-7-2)

Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for PVC armoured cable as per specification Number CB-GL (PWD electrical SSR -2021-22 Specification Number 7-7-3)

Supplying & erecting Siemens type brass cable glands for 3½core 185 sq. mm. for XLPE armoured cable as per specification NumberCB-GL (PWD electrical SSR -2021-22 Specification Number 7-7-10)

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 300 x 200 x 150 mm complete on poleas per specification Number CB-SB (PWD electrical SSR -2021-22 Specification Number 7-8-3)

Supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete as per specification Number CB-CL/AL (PWD electrical SSR -2021-22 Specification Number 7-10-1)

Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete as per specification Number CB-CL/AL(PWD electrical SSR -2021-22 Specification Number 7-10-2)

Supplying & erecting crimping type aluminium lugs for cable 95 sq. mm. complete as per specification Number CB-CL/AL (PWD electrical SSR -2021-22 Specification Number 7-10-6)

Supplying & erecting crimping type aluminium lugs for cable 185 sq. mm. complete as per specification Number CB-CL/AL (PWD electrical SSR -2021-22 Specification Number 7-10-9)

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification Number OHPL/ OPL (PWD electrical SSR -2021-22 Specification Number 8-3-13)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification Number OHPL/ PBKT (PWD electrical SSR -2021-22 Specification Number 8-3-30)

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI (PWD electrical SSR -2021-22 Specification Number 9-1-5)

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (PWD electrical SSR -2021-22 Specification Number 9-2-3)

Providing and Back filling back filling ground enhancing compound 25 kg bag complete. (PWD electrical SSR -2021-22 Specification Number 9-3-2)

Supplying and erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 3.75 KW/5 HP with discharge 2/4.1 Litres per second (LPS) for head of 36/52 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification Number WP-CGP (PWD electrical SSR -2021-22 Specification Number 12-1-9)

Making trench in soft soil of suitable width and depth as per IS for laying provided L.T cable up to 25 sq mm complete. As per specification Number CW-EXN-CTR (PWD electrical SSR -2021-22 Specification Number 16-1-1)

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (PWD electrical SSR -2021-22 Specification Number 16-1-6)

Providing burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering, streaking joint on exposed faces, rocking at joint on exposed faces and watering complete. (PWD electrical SSR -2021-22 Specification Number 16-2-1)

Supplying and erecting RCC chamber cover with frame 60cmx45cm medium duty 100kg with lifting arrangement including laying of angle iron frame of angle size as 50 x 50 x6 mm to be fixed / embedded on top of chamber complete. (PWD electrical SSR -2021-22 Specification Number 16-2-4)

Supplying and erecting of HDMI cable for projector as per specification & instructions of Project In charge

GARDENING WORK

Garden soil-Suppling on site garden soil of well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and quarry. The colour of the soil generally be red. The other such materials. The soil should be ftesh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma) (Item includes Royalty charges,, Transporting, Ioading unloading etc.) lead charges for 30 k.m. is considercd (Sr.Number1)

FARM YARD MANURE decayed, well dried, well powdered, without clods and free from stones, dried gass and other rubbish material. The colour of the manure generally be black. The manr.ne will be measured by measuring box.(Farma) (Item includes Transporring loading unloading etc.) lead charges for 30 k.m. is considered

Supplying following plants for nursery including transportation, loading and unloading etc complete.

Roses common / budded varieties (Garden PMC DSR 2019-20, Item Number4-1, Page Number4,)

Mogra / Creeper / Climbers (Garden PMC DSR 2019-20, Item Number4-2, Page Number4,)

Canna Rhyzome (Garden PMC DSR 2019-20, Item Number4-3, Page Number4,)

Seedlings of seasonals.(open pollinated.)(Garden PMC DSR 2019-20, Item Number4-4, Page Number4,)

Rooted plants in micro bag polybag for edge/ border plant (Garden PMC DSR 2019-20, Item Number4-5, Page Number4,)

Rooted plants for hedge in polybag(Garden PMC DSR 2019-20, Item Number4-6, Page Number4,)

Lawn grass Cynadon / Paspallum/American blue grass Kg. 10.00, (Garden PMC DSR 2019-20, Item Number4-7, )

Sapllings or Flowenng/shady trees,Gulmohar,Raintree, Peltophorum etc.height Minimum to I Mtr. (Garden PMC DSR 2019-20, Item Number4-9, )

Sapllings or Flowenng/shady trees,Gulmohar,Raintree, Peltophorum etc.height Minimum to 2 Mtr. (Garden PMC DSR 2019-20, Item Number4-10, )

Sapling of small , medium and ornamental flowering plants, Thuja, Cupresus,Palms,Omamental ficus,Mussanda.etc. 1 Mtr. Ht.(Garden PMC DSR 2019-20, Item Number4-11, )

Well developed common ornamental Shrubs for Shrubbery.0.5 Mtr.height.(Garden PMC DSR 2019-20, Item Number4-12, )

Ground Cover e.g.Lantan, Syngonium, Wedelia, lpomoea, Pothas, Pilea, Chlophyum, Common Ferns etc. (Garden PMC DSR 2019-20, Item Number4-12, )

Prparing Instant lawn :- Excavating the ground to a required depth of 20 cms.removing and oonveying unwanted stuff to a re4uired distance as directed. Filling fresh garden soil and manure in 3:l proportion to a height of 20 cms. Mixing soil and Manure thoroughly well, levelling,with required slope,light watering,on previous night, rolling, on surface, Fixing readymade lawn turf, rolls, or slabs of required variety as directed.Ramming on it for proper fixing & maintaining till well established by watering, weeding, clipping or mowing etc.complete.

Preparing Edge or Border :- Excavating the ground to a required depth of 20 cms.,in the required area., removing and conveying unwanted stuff, rubbish to the required distance as directed.Filling the excavated part with fresh soil and manure in 3: I proportion to a required height of 20 cms.Mixing, levelling, watering the same. Planting rooted edging/border plants at distance of 20 cms.apart by watering weeding ,stining of soil replacing casualties, pruning if necessary etc. complete..

Planting cliped Hedge:- Excavating the ground to a required depth of30 cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:l proportion to a height of 30 cms. Mixing garden soil and manure thoroughly well,levelling,watering previous night. Planting hedge plants of required species in two rows. Distance between two rows & between two plants will be 25 cms. Maintaining till well established by watering, weeding, stining the soil and clipping if necessary etc.complete.

Preparing flower Bed:-Excavating the ground to the required depth of 30 cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:l proportion to a required height of 30 cms Mixing garden soil and manure thoroughly well, levelling, watering on previous night.planting seedlings of required annuals 25 cms. apart Maintaining till well established by watering, weeding, Stirring replacing of casualties etc, Complete.

Preparing Canna Bed:- Excavating the ground !o the required depth of 30 cms.Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fiesh garden soil and manure in excavated area in 2:l proportion to a required height of 30 cms.Mixing. garden ioii & manure thoroughly well, levelling, watering on previous night. Planating well developed Canna rhyzomej 40 cms ap-art. Maintaing till well established by watering weeding, stirring, replacing, casualties etc,complele.

Preparing Shrubbery:-Excavating ttre lrouna to-,equirea depth of 30 cms,removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:l proportion to a height of 30 cms. Mixing garden soil & manure thoroughly well, levelling, watering_on previous night. planting well developed shrub-s plants,0.50 mtr.height, 0.45 Mtrs. apart as diiected and maintaining till well established by watering, weeding, stirring, replacing casualties etc.complete.

Rose Plant:- Excavating pit with size 0.3mx0.3mx0.3m removing and conveying unwanted stuff to a required distance.as directed. Filling the pit with fresh garden soil and manure in 3:l proportion to a height of 0.3 m.mixing the soil { ry1gre thoroughly well, leveiling watering on night, Planting 40 to 50 cms. height healthy pla-nt ofiequired rose .variety. Maintaining till well established by watering, weeding, stining, prunning, replacing the casualties etc.complete.

Mogra Plant /Creepers and Climbers:- Excavating the pit with size 0.3 m x 0.3 m x 0.3,m removing and conveying unwanted stuff to a required distance as directed. Fillins the pit with approved excavated material upto a height ol 0. 15 mtr. and remaining height of 0.15 mtr. with fresh garden soil and manure in 3:l proportion. Mixing soil and manure-thoroughly well, levelling, watering, on previous manure-thoroughly well, levelling, watering, on previous manure-thoroughly well, levelling, watering, on previous specifications. Maintaining till well established watering, weeding, prunning, stining, replacing casualties, etc. comDlete.

Planting large flowering and shady trees :( minimum Height I Mtr.)- Digging pit with size 0.9 m x 0.9 m x 0.9 m removing and conveying unwanted stuff to a required distance .as directed. Filling the pit with appioved excavated material upto a height of 0.30 m. and remaining height of 0.60 m. with fresh garden soil and manure in 3:l proportion. Mixing soil & manure thoroughly well, leveling, as directed, watering previous nlgnt, ptantlng one to two year old,minimum 1.0 mlr.height, healthy tree sapling as per specifications. Maintaining till well established by watering, weeding, stining of soil,staking, replacing of casualtiJs etc.complete.

Planting large flowering shady trees -(Minimum Height to 2 Mtr.)- Digging pit with size 0.9 m x 0.9 m x 0.9 m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30 m. and remaining height of 0.60 m. with fresh garden soil and manure in 3:l proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering previous night, planting two to three year old,minimum 2.0 mtr.heighr, healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stining of soil sraking replacing of- casualties etc.complete

Planting small and medium size ornamental /Flowerinq Per.Number 413.00 p!41:- Digging pit with size 0.6 m x 0,6 m x 0.6 m,removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm Yard Manure upto a height of 0.60 m. in 3:l proportion. Mixing soil and Manure thoroughly well, levelling, watering on previous night. Planting one to tvvo year old healthy plant saplings as per specifications. Maintaining till well established by watering, stining, of soil and manure, replacing casualties, etc. complete.

Preparins ground covers-Excavating the ground to a required depth of 20 cms.Removing & conveying unwanted stufl rubbish to the required distance as directed. Filling the Excavated area with fresh garden soil & F.Y. Manure in 3:l proportion to a height of 20 cms. Mixing, levelling,watering the same on previous night. Planting suitable ground covers as directed in staggring pattern distance between two rows 25 cms., watering & maintainis till well established.

Maintenance of Garden including maintenance of Lawn, flower bed, canna bed, shrubbery, rosary, hedges, plants in all respect including watering, weeding, trimming, Garden waste composting. Cleaning & sweeping of Garden, pathway & pagoda. Toilet cleaning, cleaning of water tank, water body, fountain, drinking water fountain, GSR etc.) for 1 month. ( Garden DSR 2018-19, Item Number163339, chapter 9-1, Page Number20, .)

Golden Bamboo plants-Golden bamboo -Bag Size (Inches) 21x21 Height (ft)8'(Garden DSR 2018-19, Item Number 6338 chapter 10-66, Page Number24,)

Kentia plam -Bag Size (Inches) 21x21 Height (ft)6'

Twisted fern - Bag Size (Inches) 8”pot Height (ft)1 Each 5 Chapter 10-146

16346 Bird next fern - Bag Size (Inches) 8”pot Height (ft)1 Each 6 Chapter 10-147

16346 Stag horn fern - Bag Size (Inches) 8"pot Height (ft)1 Each 7 Chapter 10-148

16346 Treen fern - Bag Size (Inches) 8”pot Height (ft)1 Each 8 Chapter 10-149

16349 Crypthonthus long leaf - Bag Size (Inches) 6”potHeight (ft)1 EachChapter 10-180

Dustbin 240 Litre Blue WB-240 Dimensions : 725 x 580 x 1075 mm ( 107x72x58cm ) Heavy Duty, Sunproof, Waste Garbage Bins, Wheeled Bins, Easy to maintain & Use, envirnoment Friendly, Long Lasting Capacity : 240 Litre (Non SSR)

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification Number 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent) 75 mm dia, working pressure 8 Kg/cm²

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). 75 mm dia, working pressure 8 Kg/cm²

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift 0 to 1.5 M Spec. No:- MJP SSR 21-22 Section E - Excavation .Page No-42

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) Lift 0 to 1.5 M Spec. No:- MJP SSR 21-22 SECTION E EXCAVATION .Page No-42

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift 0 to 1.5 M Spec. No:- MJP SSR 21-22 SECTION E EXCAVATION .Page No-42

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. Spec. No:- MJP SSR 21-22 SECTION E EXCAVATION. Page No-45

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete (SSR 2021-22, Item Number42.12, Page Number200, Additional specification : Bd.V.43, Page Number 574.).(Valve Chamber)

Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support. 80mm Dia Butterfly valve - PN - 1 Spec. No:- MJP SSR 21-22 SECTION - I(XII) : PIPES APPURTENANCES Page No-134

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) SECTION - I(XII) : PIPES APPURTENANCES Page No-134

Providing & fixing 25mm dia Ball valve with confirming IS Standard 9890 with required fittings etc. all complete.(NON SSR)

Providing & fixing 25mm dia Air Release valve with confirming IS Standard 14845 with required fittings etc. all complete.(NON SSR)

Providing first class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M. 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed etc.complete. Spec. No:- SSR 21-22 Sr.No-884 SSR Item No- 27.08 Ref. No- BDG-9 Page No-317

Providing and laying concrete pipes of I.S.NP. class of 100mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench completeSpec. No:- SSR 21-22 Sr.No-1364 SSR Item No- 42.06 Ref. No- BDV-41 Page No-573

Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 70 to 250 LPM discharge at 44 to 24 m head & (max. efficiency at 38 m head & 160 lpm) discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification Number WP-SMP (2 working+1 standby ) (ESD-HWP/TGP) Spec. No:- CSR 21-22 Item No- 12-2-2 Page no - 209

MODULAR FURNITURE

White Board 4' x 6' board size,Standard melamine whiteboard surface should NOT magnetic- Best for light use, Satin-finish aluminum frame,Full length marker tray and hanging system included Full length marker tray and hanging system included ,etc. , approved by MSMSB engineer/ architect

LCD screen-64" - 4K ULTRA HD smart LED TV etc.,approved by MSMSB engineer/ architect

LED Projector, brightness < 2500lumen , 3LCD technology carrying bag VGA cable , main unit power cable, WIFI system , remote control including batteries, warranty three year, adapter, aspect ration 10, etc .approved by MSMSB engineer/ architect

Projector screen - Wall mounted , white colour , rectangular in shape, size 8'x8', remote operated , cloth matt white 1.1gain, aspect ratio 4:3 native, etc. etc .approved by MSMSB engineer/ architect

Digital Board - LED Aluminium digital board, contrst ratio 11000, panel resolution , HD/full HD/ultra HD 4K, body material , stainless steel, wall mounting

Cordless mike :- AWM 490 V2, Dual P.A. wirless microphone(black), amplifire DPA 770 , Speaker outdoor/indoor ,Sr X 50D X 2-8"50 Watt, size aprox 30x20x7 cm, batteries 29V etc.,approved by MSMSB engineer/ architect

Video conferencing system :- All in one video and audio USB conference camera System, Resolution HD 1080 , CMOS, 1/2.8"NTSC, interface 2.0 , conferencing,approved by MSMSB engineer/ architect

Computer :- Intel core I-5 ,HD+Desktop, Ram 8GB, Ggraphic -AMD, etc, approved by MSMSB engineer/ architect

Student's table :- size-1700x 600x 750 Made up, using 18mm commercial ply with 1mm laminate of approved colour and shade using necessory harware and accessories etc. complete as approved by MSMSB engineer/ architect

Computer table :- size-1350x 600x 750 Made up, using 18mm commercial ply with 1mm laminate of approved colour and shade using necessory harware and accessories etc. complete as approved by MSMSB engineer/ architect

Student's Chair :- Provide versatile, practical seating for workshop Seating 24" adjustable black round hardboard lab stool. Designed to ensure long-lasting use, a 14" diameter seat pan is fitted with an 11 1/2" diameter hardboard seat for exceptional comfort, while it is also secured with 8 metal rivets to protect against warping, cracking, and chipping

Student's flap chair Seat Size: W 17.5 x D 17 Back Size: W:17.5 x 19.5 H with Primary Material: Fabric of black colour. Seat is provided with PU Moulded Cushion. Foldable Wooden Tabloid for Writing & with fabric material & high cushion on seat & back.

Visitor's Chair Dimensions: H 43.5 x W 19 x D 21 with Seating Height - Min 17 & Max 21-PU Cushion,CP Armrest, Center Tilt Mechanism,Gas Lift (Up - Down Feature),Position Locking Feature, with nylon base

Professor's Chair Dimensions: H 43.5 x W 19 x D 21 with Seating Height - Min 17 & Max 21 Primary Material: Fabric Material, Net & Metal , Color: Black Net, Seat Upholstery Material: Net Fabric , Back Upholstery,Center Tilt Mechanism,Gas Lift (Up - Down Feature),Position Locking Feature, Material: Fabric Net, Base Material: plastic, Arm Material: Plastic,Wheel Material: Nylon, Upholstery Color: Black Net with Seat Lock

Air Condition (6 tone for one class room ) - Top quality HVAC cooling with 1.5 tone , 5 star,white in colour, indoor and out door unit with copper piping , all with necessary required material and accessories etc, complete and with testing

Professor table Dimensions: L 1500 mm x W 6000 mm x H 750 mm or customised made of high quality MDF with melamine board & frame with epoxy powder coated, antirust, damproof.

Staff Table Dimensions: L 1200 mm x W 6000 mm x H 750 mm or customised made of high quality MDF with melamine board & frame with epoxy powder coated, antirust, damproof.

Proving and fixing F.R.P. mural consiting high and low relief design embossed from backside filled with FRP putti and mounting/ fixing aith screws or fasteners made out of 6mm thk FRP caste with coloure grooved design to hide the structural support if required from inside including fabricating mulding painting structural members which sre exposed , colouring the mural in deco paint or special PU paint in antique look including transport , loading, unloading on site installation with all taxes , otrci etc. witin the PCMC limits etc complete as per sketch and drawing approved by architect and as directed by engineer incharge.

Supply, Installation, Testing and Commissioning of Solar system

Latest Technology of Double-Laser Butt-Welded high efficiency fins welded on German-machine for 18mm contact and One-side prismatic glass imported from Europe for high transmittance. Jindal make GI / Stainless Steel SS304 Grade tank with highly efficient Welding and PUF/ Rockwool Insulation 48kg/m3 density 200mm diametrically thick covered with pre-coated cover. M.S. Angle 50x50x5 mm / M.S. Channel 75x40 mm Stand for the tank and front and back supports for collectors. Total capacity required : 6600 Litre Per Day (LPD) Number of Unit to be provided : 6 Number (4 Units of capacity 1500 LPD each and 2 Units of capacity 300 LPD each) Delivering water @ 65degC (±5), Water Output – 150 Ltr./day/plate Solar Copper tubes Collectors of Latest Technology of Double-Laser-Butt-Welded high efficiency fins welded on German-machine for 18mm contact and One-side prismatic glass imported from Europe for high transmittance. Jindal make GI / Stainless Steel SS304 Grade tank with highly efficient Welding and PUF/Rockwool Insulation 48kg/m3 density 200mm diametrically thick covered with pre-coated cover. Details of Flat Plate Panel 1) Copper Fins thickness - 0.10mm Copper 99.99% Purity electrolytic-grade-oxygen-free, 2) Capacity of each plate panel should be 150 LPD and number of panel to be provided 44 Number 3) Plate size : 1 mtr. x 2mtr 4) Coating - Pure Polyester Powder Coating, 5) Glass-cover - One-side prismatic glass imported from Europe for high transmittance and internal reflectance Transmittance > 88%, Tank Tank capacity - 1500 ltr., Quantity - 4 Number, and 300 Ltr, Quantity - 2 Number, Material - M.S. with epoxy coating INSULATION Thermal insulation Material - Rockwool insulation 48kg/m3 density Thickness Of insulation - 200mm diametrically Heat Loss - Heat Loss co-efficient < 0.6w/m2/degC

Piping Work of various Diameter required for Solar system : Hot Water User Piping from Solar Tank To tap in toilet block of each room in hostel building. Cold Water Inlet Piping From Cold Water Supply To Solar Tank of various sizes (i.e. ¾”, 1” , 1 1/4” and its length 225 Mtr, 325 Mtr and 250 Mtr respectively) with required Ball Valve per outlet & Non return valve to all toilet block of required size also other necessary accessories. Required dismantling of existing civil work, making holes with core cutting machine, repairs and rectifications is to be done by bidder.

Fabrication Structure for installation of Solar System on the sloping roof.: MS Fabricated Stand as per design duly approved by Project Consultant required for the cold water supply tank, solar system tank and front and back supports for collectors including all works, accessories with primer and painting etc. complete. Required for above Solar water system. These tanks are to be placed over existing slopping GI sheet roofing at appropriate height required for gravity force flow. Accordingly structural / fabrication work to be done by bidder. Required dismantling of existing civil work, making holes with core cutting machine, necessary repairs and rectifications is to be done by bidder.

RO + WATER COOLER UNIT FOR ALL BUILDINGS

Providing and fixing water purifier of capacity 20 liters with necessary arrangement of plumbing of inlet and outlet with electrical light point with required changes wherever necessary in existing civil structure and repairing work for installation of Water Dispenser Mineral RO Technology and an inbuilt TDS controller etc. The double purification of RO + UF removes even dissolved impurities such as chemicals, bacteria, viruses and salts, making the water 100% pure. Mineral RO Technology with all necessary accessories and all Electricals and Mechanical parts - 1 Year Consumables (like RO Membrane & UF Membrane - 2 Number each, Sediment Filter - 2Number, Carbon Filter - 2Number & Post Carbon Filter - 2 Number etc.) Purification capacity tested on raw water with TDS level of 750 ppm at room temperature . Approximate dimensions : Height : 134.5 cm Width : 42.5 cm, Depth : 40 cm Weight 38 kg

Arrangment and installation of plumbing and electrical system complete job for 20 Numberwater purifier.

KITCHEN EQUIPMENTS AND FURNITURE

Bulk Fryer Size - 750 x 750 x 850 + 150 Description - Supply, Install and commissioning of Bulf Fryer of size 750 x 750 x 850 + 150mm, specifications as per approved by consultant and msamb engineer , etc. top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour, etc.

Work Table with 2u/s Size - 600 x 750 x 850 + 150 Description - Supply & install Work Table with 2 under shelf of size 600 x 750 x 850 + 150 mm, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour, etc. complete specification to as per approved by consultant and msamb engineer , etc.

2 Burner Gas Range with 1u/s Size - 1200 x 750 x 850 + 150 Description - Supply, Install and commissioning of Double burner gas range of size 1200 x 750 x 850 + 150, of Stainless Steel Commercial Gas Burner., etc.complete specification to as per approved by consultant and msamb engineer , etc.

2 Burner Stock Pot Range Size - 1650 x 750 x 450 Description - Supply, Install and commissioning of Double burner Stock Pot range of size 1200 x 750 x 850 + 150, specifications to as per approved by consultant and msamb engineer .

Work Table with 2u/s Size - 800 x 750 x 850 + 150 Description - Supply & install Work Table with 2 under shelf of size 800 x 750 x 850 + 150 mm, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour, etc,complet to as per approved by consultant and msamb engineer .

Single Sink Unit Size - 600 x 750 x 850 + 150 Description - Supply & install Single Stainless steel sink unit of size 600 x 750 x 850 + 150mm, sinks shall be constructed at 16 SWG SS sheet with radius corners, argon arc welded, smooth ground and uniformly finished duty with 1.5" dia. BSP drain coupling polished with all resulting edges rounded with no burr or other excess materials left, specifications to as per approved by consultant and msamb engineer , etc.

Work Table with 2u/s Size - 1650 x 750 x 850 + 150 Description - Supply & install Work Table with 2 under shelf of size 1650 x 750 x 850 + 150 mm, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour, etc. complete specification to as per approved by consultant and msamb engineer , etc.

Chapati Plate with Puffer & 1u/s Size - 1500 x 750 x 850 + 150 Description - Supply, install and commisionning of Chapati Plate with puffer and 1 undershelve of size 1500 x 750 x 850 + 150mm,, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour, etc. complete specification to as per approved by consultant and msamb engineer.

Work Table with 2u/s Size - 600 x 750 x 850 + 150 Description - Supply & install Work Table with 2 under shelf of size 600 x 750 x 850 + 150 mm, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

Single Sink Unit Size - 600 x 750 x 850 + 150 Description - Supply & install Single Stainless steel sink unit of size 600 x 750 x 850 + 150mm, sinks shall be constructed at 16 SWG SS sheet with radius corners, argon arc welded, smooth ground and uniformly finished duty with 1.5" dia. BSP drain coupling polished with all resulting edges rounded with no burr or other excess materials left. complete specification to as per approved by consultant and msamb engineer.

Chapati Rolling / Marble Table Size - 1500 x 750 x 850 + 150 Description - Supply, install & commission Chapati rolling table with Granite top and 1 under shelf of size 1500 x 675 x 850 mm, top shall be made out of 25 mm thk polished granite stone slab supported with 16 SWG SS sheet channels length & diagonal wise duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

Dough Kneader Capacity - 25 Kg. Description - Supply, Install and commissioning of Dough Kneader of capacity 25 kg. Body completely constructed of heavy duty cast iron with gear box mounted on the top the mixing bowl of S.S - 304 sheet 14 swg with S.S -304 arm to mix the dough and is operated electrically with heavy duty motor of 1 hp. Motor shall be S1 type of IS : 325 standard.complete specification to as per approved by consultant and msamb engineer.

Preparation Table with 1u/s Size - 1650 x 600 x 850 + 150 Description - Supply & install Preparation Table with 1 under shelf of size 1650 x 600 x 850 + 150 mm, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

Single Sink Unit Size - 600 x 750 x 850 + 150 Description - Supply & install Single Stainless steel sink unit of size 600 x 750 x 850 + 150mm, sinks shall be constructed at 16 SWG SS sheet with radius corners, argon arc welded, smooth ground and uniformly finished duty with 1.5" dia. BSP drain coupling polished with all resulting edges rounded with no burr or other excess materials left . complete specification to as per approved by consultant and msamb engineer.

Wet Masala Grinder Capacity - 15 Ltr. Description - Supply, Install and commissioning of Wet Masala Grinder of capacity 15 Ltr, Body completely constructed of heavy duty cast iron with gear box mounted on the top the mixing bowl of S.S - 304 sheet 14 swg with S.S -304 arm to mix the dough and is operated electrically with heavy duty motor of 1 hp. Motor shall be S1 type of IS : 325 standard.of. complete specification to as per approved by consultant and msamb engineer.

2 Door Vertical Refrigerator Capacity - 500 Ltr. Size - 750 x 750 x 2100 Description - Supply, erection & Commissioning in place of, vertical 2 door refrigerator, Overall Size: 750 x 750 x 2100mm ht. Internal and external structure in AISI 304 stainless steel with high density expanded polyurethane insulating foam of 60 mm in thickness. External back panel and bottom in galvanized steel with IP65 digital control panel, automatic defrosting, adjustable stainless steel feet. All doors are fitted with standard locks and keys and microswitch to switch off the fan when the door is not opened. with all other necessary accessories. complete specification to as per approved by consultant and msamb engineer.

2 Door Vertical Deep Freezer Capacity - 500 Ltr. Size - 750 x 750 x 2100 Description - Supply, erection & Commissioning vertical 2 door deep freezer of electrolux make or approved equivalent make of capacity 500 Ltr., Overall Size: 750 x 750 x 2100mm (operating temperature -22/-15 degree Centigrade) Internal and external structure in AISI 304 stainless steel with high-density expanded polyurethane insulating foam of 60 mm in thickness. External back panel and bottom in galvanized steel with IP65 digital control panel, automatic defrosting, adjustable stainless steel feet. All doors are fitted with standard locks and keys and microswitch to switch off the fan when the door is not opened. with all other necessary accessories as per particular specifications.complete specification to as per approved by consultant and msamb engineer.

5 Shelf Storage Rack Size - 1350 x 600 x 1800 Description - Supply & install 5 shelf dish storage rack of size 1350 x 600 x 1800mm, made out of 18 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left. Each rack shall have Number of shelves as specified and reinforced with 1"x3"x1" inverted 16 SWG 304 grade SS steel channel further the shelves will be secured to 1.5" dia. 16 SWG 30$ grade SS pip steel pipe along with adjustable nylon bullet feet, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

7 Shelf Vegetable Storage Rack Size - 1200 x 600 x 1800 Description - Supply & install 7 shelf vegetable storage rack of size 1200 x 600 x 1800mm, made out of 18 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left. Each rack shall have Number of shelves as specified and reinforced with 1"x3"x1" inverted 16 SWG 304 grade SS steel channel further the shelves will be secured to 1.5" dia. 16 SWG 30$ grade SS pip steel pipe along with adjustable nylon bullet feet, including all accessories, tools tackels and labour. etc. complete . As directed and approved by Engineer in charge. consultant and msamb engineer , etc

Soiled Dish Table Size - 1500 x 600 x 850 Description - Supply & install Soiled dish Table of size 1500 x 600 x 850, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

3 Sink Unit Size - 1500 x 600 x 850 + 150 Description - Supply & install 3 Stainless steel sink unit of size 1500 x 600 x 850 + 150mm, sinks shall be constructed at 16 SWG SS sheet with radius corners, argon arc welded, smooth ground and uniformly finished duty with 1.5" dia. BSP drain coupling polished with all resulting edges rounded with no burr or other excess materials left, complete specification to as per approved by consultant and msamb engineer.

5 Shelf Plate Rack Size - 600 x 600 x 1800 Description - Supply & install 5 shelf plate rack of size 600 x 600 x 1800mm, made out of 18 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left. Each rack shall have Number of shelves as specified and reinforced with 1"x3"x1" inverted 16 SWG 304 grade SS steel channel further the shelves will be secured to 1.5" dia. 16 SWG 30$ grade SS pip steel pipe along with adjustable nylon bullet feet, including all accessories, tools tackels and labour. complete specification to as per approved by consultant and msamb engineer.

Neutral Counter with 2 u/s 3 side closed with Railing Size - 1200 x 750 + 300 x 850 Description - Supply, install and commissioning of Neutral Counter with 2 undershelves and 3 side enclosed with railing of size 1200 x 750 + 300 x 850, top and side shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. complete . As per approved by consultant and msamb engineer.

Refrigerated Salad Counter with 1u/s, 3 Side Closed, 4 NumberG. N. Pan - 150 mm Deep with Lid Size - 900 x 750 + 300 x 850 Description - Supply, install and commissioning of Refrigerated Salad Counter with 1 undershelves and 3 side enclosed of size 900 x 750 + 300 x 850, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left. Also providing 4 Number G. N. pan 150mm deep made out of 16 SWG sheet duty. underside to be reinforced with SS channel running length wise, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. complete. As per approved by consultant and msamb engineer.

Hot Bain Marie Counter with 1u/s, 3 Side Closed, 5 NumberG. N. Pan - 150 mm Deep with Lid Size - 1850 x 750 + 300 x 850 Supply, install and commissioning of Hot Bain Marie Counter with 1 undershelves and enclosed on 3 sides, 5 Number G. N. Pan 150mm Deep with Lid on it of size 1850 x 750 + 300 x 850, top shall be made out of 16 SWG SS sheet duty polished with all resulting edges rounded with no burr or other excess materials left, underside to be reinforced with SS channel running length wise, G. N. pan 150 mm to be provided made out of 16 SWG SS sheet, under shelfes made with 18 SWG SS sheet uniformly polished and reinforced with SS channel running length wise, all shelves shall be turned down 1.5" and 0.5" underneath on all sides with resulting corners cutout to fit contour of leg, including all accessories, tools tackels and labour. etc.complete As directed and approved by Engineer in charge. consultant and msamb engineer , etc

Kitchen Exhaust system with fresh air Supply and instalation of Kitchen exhaust system with fresh air system complete specification and coating from inside and insullation from outside etc. complete. As directed and approved by Engineer in charge. consultant and msamb engineer , etc

Gas Pipline system Supply and instaling Gas pipeline system of approved and proven quality and ISI standred with as necessary accessories as reguator,pressure, gauge, saftey valve, cage, etc. complete . As directed and approved by Engineer in charge. consultant and msamb engineer , etc

Dinning table six seater Dimensions: L0.90 X W1.20 X H 0.90 Stainless steel tops with galvanized steel legs and under shelves. All tables can be adjusted between 0.85M and 0.90 high

Reception table Dimensions: L0.90XW1.20XH 0.90 Stainless steel tops with galvanized steel legs and under shelves. All tables can be adjusted between 0.85M and 0.90 high

Green House Erection

1. Supply and Erection of New Demo Greenhouses ( Number7 ) including Cleaning and Land Leveling at site , Transport of Greenhouse Material, Foundations, Erection of greenhouse Commissioning, and Testing, etc a) Saw tooth type polyhouses,(ovph) Number1, 2, 3 Size of Polyhouses Number1,2,3 are 480 Square Meter (20x24m) with new foundation. Height of Gutter –4.5, Total Height of greenhouse- 6.5m, Height of top Vent-0.8 to 1 m, Bay Size- 8 X 4 m., Hockey Stick- 2 m from all sides for 480sq sizes of polyhouses and not require for 576 Square Meter sizes of polyhouses, Foundation Pits size 2.5x1.5x3ft, Hold Fast -8mm bar (length -10 inch), cement concert proportions for foundation -1:4:8, Slope – lengthwise 1% and widthwise 2% , 1. Structure – Aerodynamic, Curtain height -2mt.6 Horizontal cross brassing on each long arch on gable side. G.I Piepes:The sizes of parts and components of Tabular structure, Galvanized Pipes(GI), As per BIS Standards, IS;1161-2014 , are as: Diameter/Thickness of G.I.pipe in mm. :1) Too bar for hold- fast in foundation: 8mm, 2) Column-76.1/2.9, 3) Foundations for all columns - 60.3/2.9, 5) Truss bottom –small sides & front /back big-48.3/2.9,6) All Corridors-48.3/2.9,7) Top cross - 42.4/2.6,8) Corridor support members (side and F/B)- 42.4/2.6,9) Trusses – top curved members- 42.4/2.6,10) Purlins (all except curtain) - 42.4/2.6, 11) Door column-42.4/2.6,12) Door bottom- 33..4/2.6, 13) Purlins –Curtain-33.7/2.6, 14) Truss members (minimum no .5 per bay)- 33.7/2.6 15) Cross bracing- 33.7/2.6. 16) Door top -33.7./2.6.17) Curtain universal-33.7/2.6. 18) Runners (for top UV film) -26.9/2.3 19) Cutain pipe-26.9/2.3 20) Cutain handle-26.9/2.3. 21) Curtain guide- 21.3/2.00. 22) Number Door Number1, .Polyfilm: Thickness – 200 Microns.UV stabilized. – Diffused, Thermic film, Three layer film, Light transmission -88%, and weight -1kg for 5.3Square Meter As per BIS Standard, IS 15827-2019. Nuts and bolt sizes: High tensile nuts & bolts of minimum 10mm thick, duly zinc plated & shall resist 150 hours of salt spray test. Minimum 6mm high tensile nuts & bolts shall be allowed only for fitting gutter to Purlins. Other: Self Topping Screw, -20 mm self drilling tapping screw. Clamps: Made out of pre galvanised GP sheet having minimum 2.0mm thickness & which shall resist 400 hours of salt spray test. Gutter: Trapezoidal shape Aluminium gutter in single piece (without joint) having 500mm development width and 1.5 mm thickness. Aluminum Profiles – C Type Aluminum Profiles to fix Shade net to the structure by means of self-tapping screws. Weight of Aluminum Profile is 200 – 220 gr/m. Spring Insert – Zigzag spring insert to fix shade net to Aluminum Profile. 2.3 mm diameter of spring wire and cold galvanization is applied on the wire. Wire material is high carbon steel/ zick plated /plastic coated with spring action. Shade Screen: White/ Green- 50 % shade net below the Gutter, 50%black shade- net require in anthurium and orchid polyhouse, as per BIS standard IS 16008,(Part 1): 2016, weight 100gm/Square Meter insect net of 40 mesh , As per BIS Standard IS 16513:2016. ,GI wire for fixing net -10 & 14 gauge.Apron-Laminated Woven PE fabric apron upto 1 m to 1.5m height from all sides , UV stabilized. - Diffused, Door –UV Stabilized, Fibre Reinforced Plastic (FRP) sheet door with 1m width and 2 m height. Box section frame is embedded inside for the strength, .Number of door one per polyhouses. In greenhouse erection material for which the BSI standards have been specified should be used accordingly Specification,Quantity and design of the polyhouses are as per greenhouse guideline state NHM 19-20

b) Saw tooth type polyhouses,(ovph) Number 6 and 7 Size of Polyhouses Number6,7 are 576 Square Meter (24x24m) already have foundation at site. Height of Gutter –4.5, Total Height of greenhouse- 6.5m, Height of top Vent-0.8 to 1 m, Bay Size- 8 X 4 m., Hockey Stick- 2 m from all sides for 480sq sizes of polyhouses and not require for 576 Square Meter sizes of polyhouses, Foundation Pits size 2.5x1.5x3ft, Hold Fast -8mm bar (length -10 inch), cement concert proportions for foundation -1:4:8, Slope – lengthwise 1% and widthwise 2% , Structure – Aerodynamic, Curtain height -2mt.6 Horizontal cross brassing on each long arch on gable side. G.I Piepes:The sizes of parts and components of Tabular structure, Galvanized Pipes(GI), As per BIS Standards, IS;1161-2014 , are as: Diameter/Thickness of G.I.pipe in mm. :1) Too bar for hold- fast in foundation: 8mm, 2) Column-76.1/2.9, 3) Foundations for all columns - 60.3/2.9, 5) Truss bottom –small sides & front /back big-48.3/2.9,6) All Corridors-48.3/2.9,7) Top cross - 42.4/2.6,8) Corridor support members (side and F/B)- 42.4/2.6,9) Trusses – top curved members- 42.4/2.6,10) Purlins (all except curtain) - 42.4/2.6, 11) Door column-42.4/2.6,12) Door bottom- 33..4/2.6, 13) Purlins –Curtain-33.7/2.6, 14) Truss members (minimum no .5 per bay)- 33.7/2.6 15) Cross bracing- 33.7/2.6. 16) Door top -33.7./2.6.17) Curtain universal-33.7/2.6. 18) Runners (for top UV film) -26.9/2.3 19) Cutain pipe-26.9/2.3 20) Cutain handle-26.9/2.3. 21) Curtain guide- 21.3/2.00. 22) Number Door Number1, .Polyfilm: Thickness – 200 Microns.UV stabilized. – Diffused, Thermic film, Three layer film, Light transmission -88%, and weight -1kg for 5.3Square Meter As per BIS Standard, IS 15827-2019. Nuts and bolt sizes: High tensile nuts & bolts of minimum 10mm thick, duly zinc plated & shall resist 150 hours of salt spray test. Minimum 6mm high tensile nuts & bolts shall be allowed only for fitting gutter to Purlins. Other: Self Topping Screw, -20 mm self drilling tapping screw. Clamps: Made out of pre galvanised GP sheet having minimum 2.0mm thickness & which shall resist 400 hours of salt spray test. Gutter: Trapezoidal shape Aluminium gutter in single piece (without joint) having 500mm development width and 1.5 mm thickness. Aluminum Profiles – C Type Aluminum Profiles to fix Shade net to the structure by means of self-tapping screws. Weight of Aluminum Profile is 200 – 220 gr/m. Spring Insert – Zigzag spring insert to fix shade net to Aluminum Profile. 2.3 mm diameter of spring wire and cold galvanization is applied on the wire. Wire material is high carbon steel/ zick plated /plastic coated with spring action. Shade Screen: White/ Green- 50 % shade net below the Gutter, 50%black shade- net require in anthurium and orchid polyhouse, as per BIS standard IS 16008,(Part 1): 2016, weight 100gm/Square Meter insect net of 40 mesh , As per BIS Standard IS 16513:2016. ,GI wire for fixing net -10 & 14 gauge.Apron-Laminated Woven PE fabric apron upto 1 m to 1.5m height from all sides , UV stabilized. - Diffused, Door –UV Stabilized, Fibre Reinforced Plastic (FRP) sheet door with 1m width and 2 m height. Box section frame is embedded inside for the strength, .Number of door one per polyhouses. In greenhouse erection material for which the BSI standards have been specified should be used accordingly Specification,Quantity and design of the polyhouses are as per greenhouse guideline state NHM 19-20

c) flat type shade house Number4: Shade Number4 , Size 20x24m = 480 Square Meter, Span: 4X4m ,Height – 4m Orientation Lengthwise: South to North side lengthwise, Foundation details: already have foundation of flat type shade houses Number4 and 5. A).GI Pipe : The sizes of parts and components of Tabular structure, Galvanized Pipes(GI) with 50 micron thick Galvanising, As per BIS Standard, IS;1161-2014 , are as,Name of part and Length in m. Dia in mm /Thickness in mm 1) Foundation Pipe-1m, 48.3 mm OD/2.9 mm. 2) Shade house main column-4 m, 60.3 mm OD/2.9 mm 3) Truss-4 m, 42.4 mm.OD/2.6 mm. 4) Purlins-4 m, 42.4 mm.OD/2.6 mm. 5) Clamps and nut bolts- 2mm . 6) Curtain pipe-, 26.9 mm OD/2.3 mm. 7) Curtain handle-26.9 mm OD/2.3 mm.8) Curtain runner pipe-, 26.9 mm OD/2.3 mm. 9) Flap control pipes -, 26.9 mm OD/2.3 mm.10) Door coloumn-42.4mm OD. 11) Door corridor, 42.4mm OD/2.6mm.12) Door top-33.7mm OD, 2.6mm,13) Door bottom-33.7mm OD/2.6mm.14) Door- One door for 480 Square Meter and two doors for 560 Square Meter of shade houses.15) (Hockey) No Corridors. Height of curtain-2 to 2.5mAluminum Profiles – C Type Aluminum Profiles to fix Shade net to the structure by means of self-tapping screws. Weight of Aluminum Profile is 200 – 220 gr/m, Spring Insert – Zigzag spring insert to fix shade net to Aluminum Profile. Zig-zag spring Insert –min- 2.3 mm thick,zick plated /plastic coated with spring action.Clamps: Thickness of clamps –2mm, Nuts and bolt sizes: High tensile nuts & bolts of minimum 10mm thick, duly zinc plated & shall resist 150 hours of salt spray test. Other: Self Topping Screw, -20 mm self drilling tapping screw, Shade Net –75% mono shade net top of the shade house and 50% mono Green colour at four sides and., As per BIS standard, IS 16008,(Part 2): 2016, weight 100gm/Square Meter Apron- Laminated Woven PE fabric apron upto 1 m to 1.5m height from all sides will be provided., UV stabilized. - Diffused Door – UV Stabilized , Fibre Reinforced Plastic (FRP) sheet door with 1m width and 2 m height. Box section frame is embedded inside for the strength. Shade Number4 door quantity one door and shade no .5 door quantity 2 (two) In shade house erection material for which the BSI standards have been specified should be used accordingly. Note :- Greenhouse Erector should be visit site before fill up the tender and clarifies the any problem. ii) Polyhouses no 6, 7 already have the foundation of old polyhouses. Flat type shade house Number4 and shade house Number5 already have the foundation of old shade houses. iv) Site cleaning and Land leveling should be done by greenhouse erectors v) Greenhouse erectors must be supply of greenhouse material and erection of greenhouses at site, including, cleaning, land leveling, foundations, transport, erection of greenhouses (commissioning) and testing etc vi) Water and electricity source direction will be given by NIPHT. Other arrangement should be done by contractor.

d) flat type shade house Number 5: Shade house Number5, Size 20x28 m = 560 sq. Span: 4X4m ,Height – 4m ,Orientation Lengthwise: South to North side lengthwise, Foundation details: already have foundation of flat type shade houses Number4 and 5. A).GI Pipe : The sizes of parts and components of Tabular structure, Galvanized Pipes(GI) with 50 micron thick Galvanising, As per BIS Standard, IS;1161-2014 , are as,Name of part and Length in m. Dia in mm /Thickness in mm 1) Foundation Pipe-1m, 48.3 mm OD/2.9 mm. 2) Shade house main column-4 m, 60.3 mm OD/2.9 mm 3) Truss-4 m, 42.4 mm.OD/2.6 mm. 4) Purlins-4 m, 42.4 mm.OD/2.6 mm. 5) Clamps and nut bolts- 2mm . 6) Curtain pipe-, 26.9 mm OD/2.3 mm. 7) Curtain handle-26.9 mm OD/2.3 mm.8) Curtain runner pipe-, 26.9 mm OD/2.3 mm. 9) Flap control pipes -, 26.9 mm OD/2.3 mm.10) Door coloumn-42.4mm OD. 11) Door corridor, 42.4mm OD/2.6mm.12) Door top-33.7mm OD, 2.6mm,13) Door bottom-33.7mm OD/2.6mm.14) Door- One door for 480 Square Meter and two doors for 560 Square Meter of shade houses.15) (Hockey) No Corridors. Height of curtain-2 to 2.5mAluminum Profiles – C Type Aluminum Profiles to fix Shade net to the structure by means of self-tapping screws. Weight of Aluminum Profile is 200 – 220 gr/m, Spring Insert – Zigzag spring insert to fix shade net to Aluminum Profile. Zig-zag spring Insert –min- 2.3 mm thick,zick plated /plastic coated with spring action.Clamps: Thickness of clamps –2mm, Nuts and bolt sizes: High tensile nuts & bolts of minimum 10mm thick, duly zinc plated & shall resist 150 hours of salt spray test. Other: Self Topping Screw, -20 mm self drilling tapping screw, Shade Net –75% mono shade net top of the shade house and 50% mono Green colour at four sides and., As per BIS standard, IS 16008,(Part 2): 2016, weight 100gm/Square Meter Apron- Laminated Woven PE fabric apron upto 1 m to 1.5m height from all sides will be provided., UV stabilized. - Diffused Door – UV Stabilized , Fibre Reinforced Plastic (FRP) sheet door with 1m width and 2 m height. Box section frame is embedded inside for the strength. Shade Number4 door quantity one door and shade no .5 door quantity 2 (two) In shade house erection material for which the BSI standards have been specified should be used accordingly. Note :- Greenhouse Erector should be visit site before fill up the tender and clarifies the any problem. ii) Polyhouses no 6, 7 already have the foundation of old polyhouses. Flat type shade house Number4 and shade house Number5 already have the foundation of old shade houses. iv) Site cleaning and Land leveling should be done by greenhouse erectors v) Greenhouse erectors must be supply of greenhouse material and erection of greenhouses at site, including, cleaning, land leveling, foundations, transport, erection of greenhouses (commissioning) and testing etc vi) Water and electricity source direction will be given by NIPHT. Other arrangement should be done by contractor.

Supply and Installation and commissioing of Irrigation System for Polyhouse Number1,2,3,4,5,7

General Specifications For Control Head /Drip/overhead Micro sprinklers and Misters. Specifications for Control Head As Per Item Power supply arrangement should be available at site Pumps should be with ISI mark Specifications for Irrigation System -Drip / Misters / Overhead Microsprinklers Lateral pipes/ Emitting pipes shall be necessarily be of ISI mark (IS:12786)/(IS:13488) Lateral size should not be less than 16mm OD & minimum Class-II Emitters (IS:13487) spacing in drip irrigation should not be more than 0.3 m , Emitters discharge in drip irrigation should not be more than 2lph , Lateral length in drip irrigation should not exceed 40 mtrs. , Main and Submain line should be of PVC(IS:4985) Mini sprinkler & overhead irrigation systems should be designed to achieve minimum Emission Uniformity of 85%

Specifications For Fogging System Lateral pipes shall be necessarily be of ISI mark (IS:12786) Lateral size should not be less than 16mm OD Fogger discharge should not be more than 7.5 lph per fogger i.e. 7.5x4 =30 lph per 4-way Lateral length should not exceed 40 mtrs. Foggers should be able to creat droplet sizes of less than 90 microns (supported by the literature) Foggers should be operated at minimum 3 kg/cm2 Submain should be of PVC(IS:4985) Foggers should be provided with drainage prevent devices.

a) Details of Drip Irrigation System for Polyhouse Number1,2,3,6 and 7

Area 2592 sq mt. , Crop- Vegetable(Polyhouse 1,3,6 & 7), Orchid & Anthurium (Polyhouse 2), Two laterals per bed. Bed size vegetables : 90x50x40 cm. orchind & Anturiums : 100x50 cm

PVC pipe main & submain: PVC Pipe 63 mm X 6 kg/cm2 For Mainline from Tank 300mtr, PVC Pipe 50 mm X 6 kg/cm2 For valve connection 18mtr, PVC Pipe 40 mm X 6 kg/cm2 For Submain 300 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Collecting Pipe 300mtr.

Lateral & Accessories: DRIP LATERAL OD16MM CL2 400 mtr, DRIP LINE inline 16MM 2.0LPH 30CM CL2 PC 3000 mtr, POLY GROMMET TO 16X13MM 7 set, Emitter PIPE JOINER 16X16 7 set.

Valves & Accessories: CTRL VALV 50 MM 5 Number, Submain Flush Valve 40 mm for submain 10Number, Submain Flush Valve 40 mm for collecting 20Number, PR RELIEF VALVE PL 40MM 1 Number, C. I. NON RETURN VALVE 2" 1Number, DBL ACT AIR/VAC RELEASE VAL 32MM 1Number, AIR VALVE 1"X 63 MM 1 Number

Filter & Pumps: SAND/MEDIA/GRAVEL FILTER 25M3 1 Number, SCREEN FILTER 30M³/HR 63MM 1No, Monoblock Pump 5 HP, ISI , 2 stage, Head 45mtr (Make Crompton / CRI / Kirlosker / Texmo or equivalent ) 1Number, Control Panel, Starter Unit and Accessories for pump 1 Number, Ventury 2'' 1 Number

With Fitting & Accessories, GST and Instalation

b) Details of Misting System of Polyhouse Number2

Area 480 sq mt. , Orchid & Anthurium (Polyhouse 2), Mister 20 to 30 LPH, Spacing 1x1.5mtr

a) PVC for submain: PVC Pipe 50 mm X 6 kg/cm2 For valve connection 18mtr, PVC Pipe 40 mm X 6 kg/cm2 For Submain 60 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Collecting Pipe 60mtr.

b) Lateral & Accessories: DRIP LATERAL OD16MM 400 mtr, Misters 20 to 30LPH 350 Number, POLY GROMMET TO 16X13MM 1 set, Emitter PIPE JOINER 16X16 1 set

c) Valves & Accessories: CTRL VALV 50 MM 1 Number, Submain Flush Valve 40 mm for submain 2Number, Submain Flush Valve 40 mm for collecting 4Number,

Fitting & Accessories

c) Details of Fogger Irrigation System

Area 3632 sq mt. , Crop- Vegetables + Nursery + Orchid & Anthurium , Fourway Fogger 20 to 30 LPH, Spacing 3x2.5mtr, Polyhouse 1, 2 3,4,5,6 & 7

a) PVC pipe main & submain: PVC Pipe 63 mm X 6 kg/cm2 For Mainline from Tank 174 mtr, PVC Pipe 50 mm X 6 kg/cm2 For connecting main 72 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Submain & valve connection 540 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Collecting Pipe 510mtr.

b) Lateral & Accessories: DRIP LATERAL OD16MM CL2 1500 mtr, Fogger fourway 20 to 30 LPH with leakge preventing device 405 Number, Curlspring 20 mm 4.0 '' 405 Number, GI wire 2mm thick 1250 mtr, Polygromet TO 16X13MM 3 set, Emitter PIPE JOINER 16X16 3 set.

c) Valves & Accessories: CTRL VALV 50 MM 7 Number, Submain Flush Valve 40 mm for submain 14 Number, Submain Flush Valve 40 mm for collecting 28 Number, PR RELIEF VALVE PL 40MM 1 Number, C. I. NON RETURN VALVE 2" 1Number, DBL ACT AIR/VAC RELEASE VAL 32MM 1Number, AIR VALVE 1"X 63 MM 1 Number

d) Filter & Pumps: SAND/MEDIA/GRAVEL FILTER 25M3 1 Number, SCREEN FILTER 30M³/HR 63MM 1No, Monoblock Pump 5 HP, ISI , 2 stage, Head 45mtr (Make Crompton / CRI / Kirlosker / Texmo or equivalent ) 1Number, Control Panel, Starter Unit and Accessories for pump 1 Number,

Fitting & Accessories

d) Details of Inverted Micro Sprinkler Irrigation System

Area 1040 sq mt. , Crop- Nursery, Micro Sprinkler 70 to 80 LPH, Spacing 3x2.5mtr, Polyhouse 4 & 5

PVC pipe for submain: PVC Pipe 50 mm X 6 kg/cm2 For valve connection 6 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Submain 150 mtr, PVC Pipe 40 mm X 6 kg/cm2 For Collecting Pipe 150 mtr.

Lateral & Accessories: DRIP LATERAL OD16MM CL2 400 mtr, Inverted Micro Sprinklers 70 to 80 LPH with leakge preventing device 120 Number, Curlspring 20 mm 4.0 '' 120 Number, GI wire 2mm thick 500 mtr, Polygromet TO 16X13MM 1 set, Emitter PIPE JOINER 16X16 1 set.

Valves & Accessories: CTRL VALV 50 MM 2 Number, Submain Flush Valve 40 mm for submain 4 Number, Submain Flush Valve 40 mm for collecting 8 Number

Fitting & Accessories

e) Details of Tap water system and Centralized spray system

Area 3632 sq mt. , Crop- Vegetables + Nursery + Orchid & Anthurium , Polyhouse 1, 2 3,4,5,6 & 7

PVC pipe for main: PVC Pipe 32 mm X 6 kg/cm2 For Valve Connection 6 mtr, PVC Pipe 40 mm X 6 kg/cm2 for main line 250 mtr,

Valves & Accessories: CTRL VALV 40 MM 2 Number, Flush Valve 40 mm 7 Number, AIR VALVE 1" 1 Number Quick release coupling valve (QRC) 25mm 7 Number, Hosepipe 20mm make Durolon or equivalent 100mtr.

Pumps: Monoblock Pump 2 HP, ISI , 2 stage, Head 21 to 48 mtr (Make Crompton / CRI / Kirlosker / Texmo or equivalent ) 1Number, Control Panel, Starter Unit and Accessories for pump 1 Number,

HTP - Centralized Spraying System: HTP Sprayer- Make ASPEE, Model PS-16, Suction Capsity 36Ltr/Min, Normal Working Pressure 100 to 200 PSI (7 to 14 Bar), Power Required 3HP, Pump Revolution 950 RPM 1 Number, 3HP Motor ISI With Starter Unit and Accessories like Stand, Pully, Belt, V base etc.(Make Crompton / CRI / Kirlosker / Texmo or equivalent ) 1 Number, HDPE Pipe 20mm 16 kg/cm2 Make Finolex plastro,Jain, or equivalent 300 mtr, GI Valve Assembly 1/2", 7Number, Spray pipe 8mm make Durolon or equivalent 200 mtr, Spraying GI lance with nozzle make ASPEE 4 Number

Fitting & Accessories

Media and Plantation - Providing,spreading, mixing, bed preparation,sterilisation planting material, for planting with transportation, led and lift to the site- GH-1 & 3 –Tomato & Exotic Vegetables Red soil well drain having pH 6.5,-80 brass, FYM-well decomposed powdered form-30brass, RIce husk-one year old fresh – 2000kg, Media Mixing thru Tractor soil+FYM+rice husk-30hrs, Sterilization with Nano silver Hydrogen Peroxide(H2O2), Water treatment for disinfection,Agriculture grade, Acurosil/Chemtex com/ equivalent company-40lit, Basal Dose - Single Super Phosphate IFFCO/RCF or equivalent Company- 400 kg, Di Ammonium Phosphate- 200 kg, Neem Cake/powdered- 2000 kg, Organic Fertiliser- 2000 kg, Biozyme granules- Agriculture grade granules 40 kg, Phorate-10kg, Tomato-3pl/Square Meter+10% mortality ,Imported Variety – Rijkwan, Nowara F 1= 1500 no, Brocoli -Shishir/Basanti KY- Imported variety -2000Number, Luttuce/Iceburg- Saula-EZ/SakiF1KY/IA173RZ-2000Number Including plantation, Support system- GI Wire, 14 guage(24x20)-400mts, Monofilament/ Nylon Thread, , 1 Bundle- 100 mtrs with 3 mm thickness-250Bundles, Mulching Sheet 30 micron, 400mtrs x 4ft Maple/Jain Irri or equivalent company-3 Bundle

GH - 2 Orchids, Anthurium & Equipments Coconut Shell(cut in to pieces with size L-6x W -4x H-3cm) for Anthrium & Orchids,Raw Wet Coconut-12000Number, Support system M.S. Stand- 12 x 1x 0.5 mtrs, 20 Number 200kg,GI net, 1x1’’ with 12guage-300mtrs, Plastic gutter/turf 100 cm breath, 30 cm depth with 600 micron thickness- -20 beds, Sterilization- Rogar/Chloropyrifos or Equivalent-20 Lit, Gravel /Metal, 1/2inch-4 Brass, Basal Dose-19:19:19, RCF/IFFCO or equivalent-50 kg, SSP chelated, Mahfeed / Zuwari/Deepak-5 kg, Anthurium-10pl/Square Meter, TC plant 9 month old, KF/Rise & shine- 2400No, Orchids,7pl/Square Meter ,with hairy root sys, Plant ht.7-10 cm pest & disease free plants-1700No including plantation.

GH - 4 & 5 Nursery (Ornamental & Vegetables) Red Soil- 20 Brass, FYM-10 Brass, Rice Husk-2000 kg, Cocopeat, pH 5-6,fresh bricks form-500 kg ,Perlite, Granular Form- 100 kg, Vermiculite- Granular Form-100 kg , Support System -MS Structure stand, MS Steel bar size 10 mm with GI net 1x1inch with 12 guage thickness, Ht-29",B-75cm, L- 8 ft Colour with Red oxide and paint-20Number, MS Structure – Tables, MS Steel bar size 10 mm with GI net, Ht-90cm,B-1.2m, L- 2.75m, Colour with Red oxide-10 Number GI Net, 1" x1", 12 guage-500kg, Black Plastic Pot, Size 10 Inch- 1000Number, BlackPlastic Pot, Size 8 Inch-2500Number, BlackPlastic Pot,4.5 inch-5000, Polybags,3 x 4 inch-50 kg ,Protray Plastic, 20"x12", 112 cavity-300 Number, Basal Dose -Single Super Phosphate -100 kg, Di Ammonium Phosphate-100 kg, Neem Cake-400 kg, Organic Fertiliser- 400 kg, Bioenzyme granules, -10 kg ,Phorate -10 kg, Indoor Plants- Spider lily Plant, Singonium, Begonia, Dracaena triclour, Calathea, Peace lily –(Spathiphyllum), Arelia Fern varieties, Song of india, Bracia variegated, Areca palm, , Money plant marble with moss stick, Shrubs- Cledendron, Hibiscus, Acalypha, Golden Tecoma stans, Tuja compacta, Nerium. Climbers- Clitoria Clerodendrum, Ipomea, Thuobergia Jasmine, Bougainvella. Tree plants -Sterlite Ficus plant ,Bottle brush,Rubber plant X” Mas tree, Suru (casurina) 10'' pot plant ht 2.5 to3ft-30 Plants each. Flower Plants- Hawain jasvanda, Mailikya mogara, Miniature roses, Dutch roses, Hydragena, Poinsetia, , Mussanda, Ixora, Dolly pop, Geranium, Lily pop, Balsoom, Lilium, Gladioli, Amaryllis lilly, Tube rose, Dahlia, Canna bubls,10''pot, plant ht 2.5 to3ft -50 Plants each. Vegetable Seedlings- CapsiCubic Meter, Tomato, CuCubic Meterber, Brinjal, Cabbage, Imported Seeds-Rijkwan/Knowyou/ or an equi com Nunhemes/Enza Zaden -100 Plants each with 0.5 to 1 ft height.

GH- 6 & 7 CuCubic Meterber & CapsiCubic Meter Red soil- 90 brass, FYM-40brass, Rice husk – 3000kg, Media Mixing thru Tractor- 40hrs, Sterilization with nano silver Hydrogen Peroxide(H2O2)- 50 lit, Basal Dose - Single Super Phosphate-450 kg, Di Ammonium Phosphate- 250 kg, Neem Cake- 2000 kg, Organic Fertiliser- 2000 kg, Bioenzyme granules-45 kg, Phorate-12kg, CuCubic Meterber- 3pl/Square Meter with 10% mortality, Imported Variety, Multistar F1 RZ,/Katrina EZ,/Fadia EZ, /Infinity-Nunhemp -1700 plants ,including plantation, support system- GI Wire, 14 guage(24x20)- 1000 mtrs ,Monofilament/ Nylon Thread, 1 Bundle- 100 mtrs with 3 mm thickness- - 600 Bundles. CapsiCubic Meter,3pl/Square Meter =1700 plants, 10% mortality ,Imported Variety, Inspiration/ Bachata F1 RZ,Sebrail/Volante EZ- 1700 plants, including plantation.

Equipments- Water can, capacity 12 lit- 10no, Handgloves, -15pairs, Khurpi, -10Number, Spade- 10Number, Kudal-10Number, Prunning Knife, Falcon make-,1no, Secater cut and hold, Falcon make- 20Number, Tractor with dumping trolly with spray assembly & acce.,25 HP- 1 Number

Covid-19 Health and safety: Providing and making necessary arrangements of various essential materials and items of recommended quality and make as per guidelines of the health department required for prevention of COVID-19 pandemic in consideration of health and safety management of man power at construction site 1. Hand Sanitizer.: 50 liters 2. Disinfectant. : 30 Liters 3. Sodium Hypochlorite. : 30 KG 4. Fogging machine and Liquid for sanitization.: 1 Number 5. 3 Ply Face Mask of good quality. : 500 Numbers 6. Surgical / Latex Gloves of good quality.: 200 Pairs 7. Rubber Gloves of good quality.: 100 Pairs 8. Empty Spray Bottles 100 ml (Plastic).: 20 Numbers 9. Empty Spray Bottles 1000 ml (Plastic).: 5 Numbers 10. PPE kits. : 10 Numbers 10. Temperature Guns. : 3 Numbers 11. Face shield : 30 Numbers

ELECTRO MECHANICAL WORK

PLANT AND MACHINERY For Utility Building

INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-60 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)

INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-80 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)

INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-100 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)

INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-60 mm thick PIR panels, Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside.

INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-100 mm thick PIR panels, Density: 40 ±2kg /m3 , 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside. Additional PIR filled hat section of minimum 50 mm thicnkess beyond any metal member of the support should be considered if only metal 'T' is being considered for ceiling panel support.

INSULATED FLOOR Supply and Erection as per General Technical Specifications Floor 100 mm XPS , min 30 kg/cu.m density. Rate for floor insulation to include supply and erection of all ancilliaries including polythene vapour barrier & two ply tarfelt as per specifications and bituminous primer, bitumin / bituminous cold compound for proper adhesion to surfaces.

Supply & Fixing of 6~9 mm thick EPDM / Nitrile rubber on RCC slab / brick walls with suitable CPRX compound adhesive over which the insulated panels shall be fixed tightly with Nylon / FRP / Steel reinforced Nylon bolts.The bolt heads on the panels shall be covered with hat runners filled with PUF insulation as per standard practice.

Supply & fixing of of Al foil min. 50 micron on RCC slab / brick walls with suitable CPRX compound adhesive / bitumen

Ancillary Materials and Services - Flashings for Internal and external wall-ceiling joints and wall-wall joints as applicable or as may be required for doors or other openings. The layout showing the chamber dimensions and height is enclosed for ready reference. The flashings should be atleast 50mm x 50 mm or larger sizes with adequate overlap over any given panel-panel joint (Precoated G.S. Sheet, minimum 0.5 mm thick)

Ancillary Materials and Services - Silicon / Polyeurathene sealant for sealing the gaps between panels and the external / internal face of the insulation panels and any other location as may be deemed suitable for proper insulation panel erection system as applicable.

Ancillary Materials and Services - PUF/PIR chemical, adhesives,/ tapes / plastic caps etc reqd for onsite application, as may be necessary for a complete and foolproof insulation job.

Ancillary Materials and Services -SITC of Pressure relief ports suitable for mounting on insulated panels of various thicknesses (60 mm to 100 mm) with internal heaters for room temperatures ranging from 25 deg C to (-) 10 deg C. (Fermond Soupape 2220 -Valve /Equivalent)- 1 no for each cold storage chamber.

Ancillary Materials and Services - Making & finishing of cut outs for doors, pipes, cables, pressure ports etc as per requirement at site. Finishing would include filling with PUF/PIR & PUF/PIR foam of required density and covering with pre - coated G.I.sheet from both side of the panels to give aesthetically neat joint acceptable to Consultants / Owners. This should also include any additional Silicon sealent or any other material as required.

PART-2: INSULATED DOORS

For PACK HOUSE AREA Insulated Doors -Swing type with double shutter 2200 mm x 2400 mm ht x min 44 mm thick PIR /PUF Providing & fixing of Insulated doors (suitable for fitting on panel structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated double leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window on each door leaf shall be provided. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.

For Cold Storage & Precooling Chambers (General details as per PART – I - INSULATED PANEL STRUCTURE AND THERMAL INSULATION of GTS) - Insulated Doors - Swing type with single leaf 1200 mm x 2000 mm ht x 80 mm thick PIR Providing & fixing of Insulated doors (suitable for fitting on panel structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated single leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR foam filled In-situ and with a density 42 ± 2 Kg/m3 (insulation thicknesses as mentioned).The doors shall have easily replaceable EPDM gaskets to ensure perfect hermetic sealing. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.

Strip Curtains SITC of strip curtains made of 3 mm thick transparent PVC sheet strips with 40 / 50 mm overlapping and supporting clamps. The strips shall have free swinging motion. The strip material shall be suitable for the specified low temperature application to ensure that it remains soft even at the lowest operating temperature

For Packhouse Area Suitable for Clear opening Size: 2200mm X 2400mm ht

For cold Storage & Precooling Chambers Suitable for Clear opening size: 1200 mm x 2000 mm ht

AIR COOLED CONDENSING UNITS For cold room 1,2,3 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make scroll compressor working on R449A / R448 A or other approved HFO, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line 9if required) , Base frame for mounting, H.P. / L.P.switches, Suction acCubic Meterulator Vibration eliminator, Oil pr switch, pressure gauges , Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as may be required. For cold room 1,2,3 Capacity: 4 KW DesignTemperature: (-)6 deg. C evap. and +48 deg.C cond. Temp Maximum ambient Temperature: 42 deg C ambient Minimum fin spacing: 2 mm Condensing unit inlet air pre-cooling system: to be included

AIR COOLED CONDENSING UNITS For Pre-Cooling Chamber (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R449A / R448 A or other approved HFO, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line if required) , Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch, pressure gauges , Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as may be required. Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature. Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows : For Pre-Cooling Chamber Capacity: 14 KW DesignTemperature: (-)4 deg. C evap. and +48 deg.C cond. Temp Maximum ambient Temperature: 42 deg C ambient Minimum fin spacing: 2 mm Condensing unit inlet air pre-cooling system: to be included

AIR COOLING UNITS - Air Cooling Units for Staging cold room 1,2 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Laval / Guentner / LU-VE / Thermofin / Eqvt, Model: To be Mentioned Type of Unit -Single / Twin: Single coil type Type of Refrigerant feed: HFO - DX Capacity - kW: 4 Evap. Temp. & TD ‘C’: (-)4 °C / 4 °C Coil / Fin MOC: Cu / Al Fin spacing -mm: 6 mm Fin type: Plate Finned coil length -m: To be Mentioned Total fan capacity of each unit– CMH: 4200 External sp. Wg, mm: 4 No of Fans/Unit: 2/3 Fan Motor -kW each: To be Mentioned Air throw -m: 3 m Drain pan insulation: Required Drain pan heating: Not required Type of Defrosting: Electrical Fan peripheral heating: Not required VFD for ACU fan motors: to be provided Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well.

AIR COOLING UNITS - Air Cooling Units for Pre-Cooling Chamber (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Laval / Guentner / LU-VE / Thermofin / Eqvt, Model: To be Mentioned Type of Unit -Single / Twin: Single coil type Type of Refrigerant feed: HFO - DX Capacity - kW: 14 Evap. Temp. & TD ‘C’: (-)4 °C / 4 °C Coil / Fin MOC: Cu / Al Fin spacing -mm: 6 mm Fin type: Plate Finned coil length -m: To be Mentioned Total fan capacity of each unit– CMH: 16150 External sp. Wg, mm: 20 No of Fans/Unit: 2/3 Fan Motor -kW each: To be Mentioned Air throw -m: 3 m Drain pan insulation: Required Drain pan heating: Not required Type of Defrosting: Electrical Fan peripheral heating: Not required VFD for ACU fan motors: to be provided Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well.

Refrigeration Piping, Fittings & Valves (General details as per PART – II- REFRIGERATION SYSTEM of GTS) The piping shall be of refrigeration quality The piping shall be of refrigeration quality seamless copper tubes and the valves shall be brassomatic / Henry or equivalent make. The piping shall be included accessories such as filter, drier, sight glass, heat exchanger, suction lineacCubic Meterulator etc. as per P & I diagram approved by Consultant. Adequate number of supports shall be included. The piping shall be supported at distances of maximum 1.5 m from each other with suitably placed GS threaded rods of minimum 6 mm thickness when outside the chamber and piping shall be run on cable trays of size suitable to fit the pipes including insulation. Common cable trays can be considered depending on the suitability at site, however the same shall be acceptable to the consultant / owner. Overall, the piping execution shall ensure proper workmanship and a neat and tidy work is expected with straight horizontal and vertical lines and proper supporting. Under no cirCubic Meterstances shall any additional charges be demanded by the contractor for ensuring the same. The suction and discharge lines shall be designed for a maximum pressure drop corresponding to 1.1 deg. C drop in saturated evaporating and condensing temperatures. The liquid line shall be designed for maximum pressure drop corresponding to a drop 0.5 to 1 deg. C in saturation temperature. The piping shall be designed with proper slope in the direction of Refrigerant flow and to ensure proper oil return to the compressor and should be installed with adequate supports to avoid undue vibration. The piping should be thoroughly cleaned as per standard practice prior to installation. Refrigeration piping,fittings,valves,interconnecting condensing & evaporator unit complete with standard controls & accessories, supports as may be required shall be included in cost.layout drawing showing proposed location of condesing units is atttached for your reference.

Suction line insulation (General details as per PART – II- REFRIGERATION SYSTEM of GTS) Suction line insulation with EPDM/ XLPE/Equivalent insulation with minimum 28G Aluminium foil Clading in the covered areas and Weatherproof Clading in areas exposed to sunlight and is uncovered ; e.g. Woven glass cloth with epoxy coating or Armacheck GC+weatherproof coating/equivalent Clading with suitable fittings and Adhesives.Alternatively,Fevicol Weather protect coat applied as per manufacturers recommendation may be used for entire insulton protection. Thickness - 25mm Insulation supports shall be half round or full round heavy duty PVC pipe sections of relevant size which shall be atleast 150 mm in length and shall be placed below every support. This is essentially ensuring that the insulation compression at the support is at the minimum.

Drain piping with rigid U-PVC pipe from A.C. units to to suitable drain point complete with 'U' Traps for each cold room and supports.Drain lines (inside the chambers) to have 10 mm EPDM / Eqvt. insulation with factory backed Aluminium foil.Individiual Drain outlet line from ACU pipe size shall be same as the drain outlet of ACU and further the header shall be at least one size higher than the drain outlet connection size. Further, higher sizes may be considered as per the consultants/owner's recommendation

Controls and Instruments (a) Thermostatic expansion valves for each ACUs (b) Digital temperature indicator Cubic Meter controllers (0 to 50 deg. C range) (c) Liquid line solenoid valves, DANFOSS / SPORLAN /EQVT make (d) Digital temperature indicator (minus 20 to 50 deg. C range), for A.C. units to be placed outside the each cold rooms in ante-room area. (e) Digital RH indicator (0 to 100 % range) for A.C. units to be placed outside the each cold rooms in ante-room area. Only for pre-cooling ,staging cold room ACUs

First charge refrigeration gas and oil etc. as required upto commissioning and final handling over of plant.

Painting of equipment/piping / piping supports etc. as per standard colour codes with initial coat of red oxide primer and two coats of synthetic enamel paint .

Humidification system for pre-cooling chambers complete with Industrial type Ultrasonic Humidifier, U-PVC water piping from the tanks to humidifier unit, fitting ,valves, atomizer nozzles, solenoid valves with strainers and humidistats etc. to maintain the relative humidity in the design range for Pre-Cooling Chambers. Also consider heavy duty PVC piping for air delivery into the cooling area for a release of humidified air into the main air stream, at atleast 1 m distance from the partition panel inside the cooling chamber area. Humidifier Capacity: 4 Lit/hr.

Humidification system for pre-cooling chambers complete with Industrial type Ultrasonic Humidifier, U-PVC water piping from the tanks to humidifier unit, fitting ,valves, atomizer nozzles, solenoid valves with strainers and humidistats etc. to maintain the relative humidity in the design range for Pre-Cooling Chambers. Also consider heavy duty PVC piping for air delivery into the cooling area for a release of humidified air into the main air stream, at atleast 1 m distance from the partition panel inside the cooling chamber area. Humidifier Capacity: 2 Lit/hr.

Miscellaneous Items a) Vibration isolators for condensing units, supporting rods / Frame for A.C. Units with insulation, steel structure for mouting condensing units etc. as may be required b) Minor structural openings in walls / panels etc for piping, cabling etc. and finishing. c) 2000 lit water tank along with water pump as necessary for lifting water to the tank or lifting water from the tank depending on tank location ,UPVC piping, fittings,valves etc as may be required for condenser inlet air-precooling system. Condenser air pre-cooling system shall have automatic operation with water line sonenoid valves for each individual condensing unit and there shall be an interlock with the conensing unit start/stop as well as the ambiend air temperature wherein the air precooling system starts only after the ambient air temperature crosses 33 deg C and switches off when ambient goes beloe 33 deg C.

Charges for Installation, Testing and Commissioning Installation, testing and commissioning of all above equipment / material as per the system requirement. All tools and tackles, welding machines, welding rods and gases etc. required for fabrication, erection, testing and commissioning shall be arranged by the contractor at his cost. The plant shall be erected, tested, commissioned as per Consultant's approved drawings / specifications and instructions to his and Employer's satisfaction. The refrigeration system shall be pressure tested and evacuated as per standard practice before charging the refrigerant. The water lines shall also be pressure tested as per standard practice. The plant shall be run for a period of three days after commoissioning by the contractor, to assess the plant performance. The contractor shall provide 3 hard copies of operation & maintenance for the plant along with as built drawings. The contractor shall also arrange the training of the operating staff for proper operation & maintenance of the plant (included in above rates)

PART IV - VENTILATION SYSTEM Single stage air cooling system as per the general technical specifications For Procesing Hall Supply Air -- Single stage Evaporative cooling unit. SITC of single stage evaporative air cooling units with double skin sheet metal construction 25+/-2 mm thick, CFC free PUF injected (Density 40+/-2 Kg/Cubic Meter).The unit shall have DIDW forward/backward curved blowers ,VFD compatible IE2 squirrel cage induction motor, heavy duty GSS base, the evaporative cooling pads minimum 100 mm thick (Munters / Eqvt make) designed for max 150 m/min face velocity, FRP/SS water tank with suitable arrangement for maintaining required water level., water circulating pump with associated UPVC piping, fittings, valves etc , air pre-filters Removable cleanable Al / HDP filter suitable for 90% efficiency upto 20 microns., vibration isolation pads,canvass made of heavy cloth with gaskets to join unit outlet wiht supply air duct, volume control damper etc. Units supplied should be dismantle able type from various sections to suit site conditions & installation. Cap. : 14000 cmh of 15 mm wg.exteranl static pressure.

PART IV- VENTILATION SYSTEM Exhaust Fans For Processing Hall ,for single stage evaporative air cooling system as per the capacity specified below and complete with (a) Fan with direct coupled motor (b) Mounting ring and brackets (c') Gravity louvers (d) Bird screen Cap. : 6500 cmh of 2.5 mm wg.sp.

PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 20 gauge (1.0 mm)

PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 22 gauge (0.8 mm)

PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square)with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 24 gauge (0.63 mm)

PART IV- VENTILATION SYSTEM - Supply and installation of supply air linear grills in aluminium powder coated construction with shade as required by architect along with matt finish aluminium dampers for sizes as may be required.

PART III - VENTILATION SYSTEM - processing area entry Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: :2200 mm x 2400 mm ht

PART III - VENTILATION SYSTEM - Air Curtains for cold room , pre-cooling chambers Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: approx. :1200 mm x 2000 mm ht

DISMANTLING OF EXISITNG EQUIPMENTS / ITEMS: dismantling of exisitng equiment/items keeping protected the peripheral infrastructure against damage as per following detials and handing over to them to the client. 3 Number cold room: indoor, outdoor unit, piping, cabling, light fitting, wiring, doors, etc as per the site condition Electrical panel for the system 1 no double leaf door 2400 X 2400 mm ht Evpaorative air cooling unit and air distribution ducting Light fittings inside the proess hall & any other equipments/items as asked by the client. and all minor civil works (Such as filling the holes, brickwork, plaster, reqired coloring of damaged works and required works)

Supply, Installation, Testing & Commissioning of earthing station using pipe in pipe earthing electrode with complete system as per specs. Including boring, civil work, chamber etc. Earthing shall be carried out as described in IS-3043-1960 code. Pipe in pipe earthing electrode system shall be as per enclosed technical specifications. The entire earthing system should be executed as per system supplier’s instructions. The Earthing Chamber with all the necessary material required for earthing shall be in Contractors scope. Testing of the Earthing system shall be as per specification & results shall be submitted to Engineer-in-Charge duly signed by contractor and authorized representative. 2 meters Length Earthing Electrode

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI (PWD electrical SSR -2021-22 Specification Number 9-1-5)

Supplying and erecting G.I. strip of 32 x 6 mm size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (PWD electrical SSR -2021-22 Specification Number 9-2-3)

Supplying and erecting copper strip of 25x 3 mm size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification Number EA-EP. (PWD electrical SSR -2021-22 Specification Number 9-2-2)

Supply & Installation of printed Danger Board/instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete. (PWD electrical SSR -2021-22 Specification Number 10-2-22)

Providing Round bottom fire bucket of 9 Litres capacity as per IS :2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. (PWD electrical SSR -2021-22 Specification Number 10-2-24)

Providing Floor mounting stand for keeping 4 Number of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete. (PWD electrical SSR -2021-22 Specification Number 10-2-25)

Supplying and erecting wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms complete. (PWD electrical SSR -2021-22 Specification Number 10-2-26)

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete. (PWD electrical SSR -2021-22 Specification Number 10-2-23)

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)(PWD electrical SSR -2021-22 Specification Number 10-2-27)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 –2006 & CPRI tested having 2 mm thickness upto 3.3 kV(PWD electrical SSR -2021-22 Specification Number 10-2-28)

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.(PWD electrical SSR -2021-22 Specification Number 10-2-32)

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.(PWD electrical SSR -2021-22 Specification Number 10-2-36)

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 Square Meterm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW(PWD electrical SSR -2021-22 Specification Number 1-9-9)

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 Square Meterm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW(PWD electrical SSR -2021-22 Specification Number 1-9-22)

Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification no 1-8-23)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background(PWD electrical SSR -2021-22 Specification no 1-8-36)

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 Square Meterm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW(PWD electrical SSR -2021-22 Specification Number 1-9-11)

Wiring for plug on board with Switch socket concealed type and copper wiring, earthing and with modular accessoriesas per specification No: WG-PW/CW (PWD electrical SSR -2021-22 Specification Number1-9-14)

Supplying & erecting mains with 2x2.5 Square Meterm. and earth wire 1.5 Square Meterm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC(PWD electrical SSR -2021-22 Specification Number1-6-4)

Supplying and erecting ISI mark modular type switch 16 / 20A with indicator, duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification Number1-8-6 )

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. (PWD electrical SSR -2021-22 Specification Number1-8-11 )

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background(PWD electrical SSR -2021-22 Specification Number 1-8-36)

Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (PWD electrical SSR -2021-12 Specification Number 1-1-9 )

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.(PWD electrical SSR -2021-22 Specification Number 1-1-11)

Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.(PWD electrical SSR -2021-22 Specification Number 1-2-2)

Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.(PWD electrical SSR -2021-22 Specification Number 1-2-3)

Supplying & erecting mains with 2x2.5 Square Meterm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW .(PWD electrical SSR -2021-12 Specification Number 1-3-4)

Supplying & erecting mains with 2x1.5 Square Meterm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(PWD electrical SSR -2021-12 Specification Number 1-3-2)

Supplying & erecting mains with 2x4 Square Meterm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG?MA/BW(PWD electrical SSR -2021-12 Specification Number 1-3-6)

Supplying & erecting mains with 2x6 Square Meterm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG?MA/BW(PWD electrical SSR -2021-12 Specification Number 1-3-8)

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification Number SWSWR/ MCBDB (PWD electrical SSR -2021-22 Specification Number 5-4-18)

Supplying, fixing and commissioning 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SW-RCCB/RCBO(PWD electrical SSR -2021-12 Specification Number 5-6-11)

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification Number SW-SWR/MCB(PWD electrical SSR -2021-12 Specification Number 5-3-2)

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complet (PWD electrical SSR -2021-22 Specification Number 5-4-23)

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification Number SW-SWR/MCB(PWD electrical SSR -2021-12 Specification Number 5-3-6)

Supply, Installation, Testing & Commissioning of IP 65, PVC Junction box with 2way connectors & earthing terminal inside.

Supply, Installation, Testing & Commissioning of 39/40 Watt LED Capsule type IP 65 protection, suitable for surface mounting. System Efficacy >90, Colour Temp 6500K, CRI Value minimum 80, Operating Temperature is 0 Deg. Driver having voltage range of 120 - 300 Volts, THD less than 10%, P.F. greater than 0.95, surge protection >=2.5 KV, inbuilt over voltage & under voltage protection. Complete with mounting bracket suitable for Surface mounting, wiring etc.

Supply, Installation, Testing & Commissioning of 20 Watt LED Capsule type IP 65 protection, suitable for surface mounting. System Efficacy >90, Colour Temp 6500K, CRI Value minimum 80, Operating Temperature is 0 Deg. Driver having voltage range of 120 - 300 Volts, THD less than 10%, P.F. greater than 0.95, surge protection >=2.5 KV, inbuilt over voltage & under voltage protection. Complete with mounting bracket suitable for Surface mounting, wiring etc.

Supply, Installation, Testing & Commissioning of 225 mm sweep fresh air cum exhaust fan with bird screen.- cfm for ventilation fans is 425 (±10%)

Supply, Installation, Testing & Commissioning of 375/380 mm sweep heavy duty exhaust fan with bird screen.- cfm for ventilation fans is 1470 (±10%)

Supply, Installation, Testing & Commissioning of 450 mm sweep heavy duty exhaust fan with bird screen.- cfm for ventilation fans is 2650 (±10%)

Supply, Installation, Testing & Commissioning of audio, visual alarm system for cold storage rooms. Job involves solid state Annunciator with hooter & enclosure, installed in occupied area, stay-put type push button station in each cold rooms / pre cooling rooms, cabling from cold rooms / pre cooling rooms to Annunciator. Job involves following items. 4 points Annunciator - 1 No Stay-put type push buttons. - 4 Number 2Cx0.75 sq. mm.Copper Flexible multi stranded cable. - 150 Mtrs Medium duty PVC conduit of 25 mm size with standard accessories. - 100 Mtrs