CERTAIN CIVIL AND ELECTRIFICATION REPAIR WORKS TO 164 MH, 320 FD HOSPITAL AND 420 HOSPITAL UNDER GE NORTH BINNAGURI

Amount

SCHEDULE A CIVIL WORKS PORTION Disconnecting existing water tanks and setting aside exceeding 500 ltrs and n. exc 1000 ltrs and refixing the same in the same place after repairs works complete all as specified and as directed.

Demolition of existing roof treatment complete of any description and in taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof , cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.

Material and labour for 15 mm thick screed bed in CM 1:4 with WPC @ 200 ml per bag of cement on roof slab maintaining the slope and finished the surface even and fair without using extra cement complete all as specified. Note: WPC shall be paid and measured seperately under respective item.

Material and labour for water proofing treating to RCC roof with providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating brushbond Roof Guard in 4 coats of application:- (a) apply primer coat with sika cool coat primer @ 0.3 Kg /sqm, (b) Over primer coat apply sika cool coat with fibre reinforcement a length of appox 1 Mtrs @ 0.75 kg/Sqm on flat surface and ensure that there is no bubbles of creases, overlapping of the fibre is minimum of 50 mm and allow this coat dry for a period of 2-6 hours depending on atmospheric condition. (c) Apply second coat of sika cool coat @ 0.75 Kg/Sqm. (d) Apply final coat of sika cool coat primer @ 0.08 kg/Sqm after seconf coat dried properly. (Note : Water proofing treatment work shall be carried out by applicator of manufacturer only duuly approved by GE in writiing.

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:6 complete all as specified ( Note : screed bed shall not be measured and paid separately).

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 10 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note : screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for 8-9 mm thick vitrified ceramic (square/rectangular) dark shade coloured polished tiles, (1st quality) area of each tiles not exc 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 15 mm thick screeding in CM 1:6 complete all as specified ( Note : screed bed shall not be measured and paid separately).

Material and labour for 8-9 mm thick vitrified ceramic (square/rectangular) Coloured polished tiles, (1st quality) area of each tiles exc 0.18 sqm but not exc 0.38 sqm, as in verticle surface etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 10 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

Material and labour for machine pressed prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified (Note screed bed shall not be measured and paid separately).

Material and labour for 60 mm thick Machine pressed precast rubber moulded conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over and including 50 mm thick sand cushion spread and laid levelled in layers complete all as specified.

Suppy and fixed in repairs, powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium section weighing not less than 1.67 kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 4 mm thick tinted glass and stainless steel mosquito proof gauge including powder coated aluminium deco grill having mesh size not less than 65mm x 65mm with guard bar not less than 6 mm dia fixed to flat aluminium window with C or F frmae of aluminium including making good the disturb surfcaes and finishing complete all as specified and directed.

Suppy and fixed in repairs, aluminium anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements.complete all as specified.

Suppy and fixed in repairs, powder coated anodised aluminium frame (sections weighing not less than 1.40kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle, 5.5mm thick tinted glass fixed in panels with aluminium guard bar complete all as directed.

Supply and fixed in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded including factory priming coating complete all as specified.

Supply and fixed in repairs Steel windows with side hung shutters including projecting type hinges,with 3mm thick 100mm long copper oxdised finish mild steel handle, and 300mm long steel peg stay, complete with glazing bars , dovetailed or welded including factory priming coating complete all as specified.

Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixed Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each and refixing the same opening after new choukat fixing complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.

Supply and fixed rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -B including dismantling of old rusted structuralsteel and removing from site complete all as specified.

Supply and fixed factory made solid PVC moulded door shutters with wood free EPS , 30 mm thick ( stiles) with 2,4 or 6 raised panels design with 2 mm thick Moulded PVC Sheet on the front face and 2 mm Plain colour PVC sheet on back face, supply-ing & fixing in frame at site as per specification & draw-ing complete all as specified.

Supply and fixed 35 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixed of 100 mm long stainless steel butt hinges with mild steel hinge pin complete all as specified and directed.

Supply and fixing of aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

Supply and Fixing of aluminium handle cast type anodised 150 mm size etc complete all as specified and directed.

Supply and fixing 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed.

Supply and fixed in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed.

Supply and fixed in repair, pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs, chromium plated Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixed in repair chromium plated angular cock with cup fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repair, chromium plated stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.

Supply and fixed in repairs vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.

Supply and fixed in repairs of grating round 100 mm dia of chromium plated complete all as specified.

Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Supply and fixed in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Supply and fixed for 110mm dia PVC (SWR) bend with access door for PVC (SWR) pipes, fixed to walls or fixed to mild steel clamp complete all as directed.

Supply and fixed for 75mm dia PVC (SWR) bend with access door for PVC (SWR) pipes, fixed to walls or fixed to mild steel clamp complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as specified.

Supplying, laying, jointing and testing 15 mm nominal bore dia, galvanized tube medium grade fixed to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.

Supplying, laying, jointing and testing 20 mm nominal bore dia, galvanized tube medium grade fixed to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.

Labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps / Shower / Pillar tap /Stop valves complete by Air pressure/ water gravity pressure etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC shall be apply in second layer and measured and paid separately) complete all as specified top surfaces finished even and smooth without using extra cement complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Material and labour for preparation of new surfaces of walls and applying one coat of wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying two coats exterior emulsion paint 100% acrylic, white or any tinted, over a coat of cement based primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of new surfaces of walls and applying one coat of wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Resucuring or easing & adjusting, taking down aluminium door shutter not exc. 2sqm each and refixing in the same opening after certain repairs to shutter floor top self closing device, top pivot including changing rubber beading, fiber beading, handles etc, complete all as directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing in repairs 4 mm thick tinted glass, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

Supply and fixing in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Supply and fixed in repairs chromium plated health faucet 25 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed. .

Supply and fixed in repairs CP Brass water Jet assembly with flexible PVC pipe 1.0 metre length connector to EWC water closet complete all as specified.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and PVC hinging device complete all as specified.

Supply and fixed in repairs toilet paper holder continetal type chromium plated of approved quality complete all as specified and directed .

Supply and fixed in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long which necessary or directed.

Supply and fixed in repair Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

Supply and fixed in repairs in repair for fixing over crumple joints of 0.63mm thickness Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with screws complete all as specified and as directed.

Supply and fixing in repair 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to floors, wall, ceilings etc complete all as specified and as directed.

Supply and fixed in repairs cast iron nahani/floor trap, plain with PVC grating including jointing with solvent cement cement concrete/cement mortar 1:3, 100 mm dia. outlet complete all as specified.

Material and labour for grouting hole/crack line with injecting plasticised expanding grout admixture complies to BS : 8110 Part I-1985 through the prefixed nozzles under pressure using grout pump to fill all possible pores and gaps left with in concrete mass incl rapid setting cement base water pluggung mortar with 24 hrs setting time given at any height and position of Bldg etc as per manufacturer instructions complete all as specified . Make :- FOSROC ( Cebex 100 & Rendroc Plug )or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM

Material and labour for repair to bath room out let pipe, rain water pipe mouth with the help of chemical sealing component including PCC 1:2:4(20mm graded aggregate) as per manufacturer instructions complete all as specified and directed by Engr-in-Charge. Make : FOSROC (Conbextar GP2 ) or equivalent of SIKA / ELANTS BECK/ KUNAL CONCHEM

Material and labour for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying a coat of colour wash complete all as specified.

Material and labour for preparing old decorated plastered or unplastered surfaces of walls including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white wash on the same all as complete all as specified .

Material and labour for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white wash on the same all as complete all as specified .

Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade and applying wall care white putty / white cement for filling up the cracks / holes on wall including rubbing and sand papering surfaces to achieve smooth surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old decorated distempered surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces and distempering ceiling by applying one coat of acrylic based distemper emulsion of any tint/shade and applying wall care white putty / white cement for filling up the cracks / holes on wall including rubbing and sand papering surfaces to achieve smooth surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of wall/chajja//facias including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point /bell/ exhaust point controlled by one 5 Amps one way switch complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.100 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.100 above but One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No.100 above but One light point controlled by two way switch 5/6 amps.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified.

Supply and fixed socket outlet 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed Bell push , flush type , 5/6 amp complete all as specified.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply and fixed switch in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed in repairs LED white glass Lamp 1x14 Watts, 230V Base-22 complete all as directed.

Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.

Supply and fixing in repairs LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixing in repairs bi-pin holder suitable for 20/40 Watt T/L fitting complete all as specified and directed. Make : Surya/CG/Bajaj.

Supply and fixing in repairs street light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in repairs of Post top laterns, symmetrical light distribution , spun aluminium landscape luminarie, made up of high grade unbreakable polycarbonate materials suitable for mounting on gate / pole complete with and including all accessories internally pre-wired with and including high power LED lamp 15 Watt complete all as specified and as directed.

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

Ms Singh Co