REPAIR TO CERTAIN MISC REPAIR INCLUDING PLASTERING, FLOORING, TILING, PLUMBING WKS IN CERTAIN MD ACCN BLDGS IN ARMY AREA AT BANAR, JODHPUR

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.

M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces all as specified.

M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint all as specified.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified.

M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified.

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified. Note:- WPC shall be measured and paid separately.

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends etc complete upto the height 7 Mtr all as specified. Note:- WPC shall be measured and paid separately.

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc upto the height 7 Mtr complete all as specified. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI marked complete all as specified.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.

M&L for one coat of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces all as specified.

Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified.

M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.

All as per item Ser No. 19.00 but except stone. Note:- Old stone shall be reused as obtainted from item Ser No 18.00.

Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified.

M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor finish complete all as specified.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

All as per item Ser No 26.00 above but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified.

M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform set in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade over and including 15 mm thick screed bed in CM 1:6 completed all as specified.

M&L 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including moulding (U type) on edges in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified.

Taking down chowkats or frames with shutters (w/o taking off shutters) n exc 1.5 sqm each (for steel window/ventilator) complete all as specified.

Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified.

Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.0 Sqm complete all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified.

S&F factory made steel ventilators with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded all as specified.

S&F factory made steel ventilators with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.

S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.

S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters all as specified.

S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as specified.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc all as specified.

M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm all as specified.

M&L for Preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of ordinary tint etc complete all as specified.

M&L for Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of ordinary tint etc complete all as specified.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & directed.

M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for 100mm long, Stainless Steel butt hinges fixed with doors complete all as specified.

S&F Aluminum tower bolts of extruded section of size 150mm all as specified.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles all as specified.

M&L for pressed steel frames 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified.

M&L for pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified.

M&L for PCC (1:2:4) type B-0, using 12.50mm aggregate in filling pressed steel frame, concrete shall be compressed complete all as specified.

S&F 30mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle boad medium density, wood particle board with commercial face venners; supplied and fitted to chowkats complete all as specified.

S&F 35mm thick factory made second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, guaze, etc (without sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified.

S&F 30mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified.

S&F 100mm long mild steel but hinges medium weight, cold rolled complete all as specified.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia width including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

S&F 150mm size single/doble action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified.

S&F Aluminium floor door stopper (overall length of cover plate 140mm) with suitable stops (double) fixed in wooden door to stop complete all as specified.

M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm complete all as specified.

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement, mortice lock, handle etc complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 15mm complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 20 mm complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 40 mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors etc bore of pipe 15mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20 mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 40 mm complete all as specified.

S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F 40mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

S&F in repair 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

Supply and fixing in repair 15mm dia stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, copper alloy chromium plated with long shank and cup (concealed type) complete all as specified.

S&F in repair 15mm dia stop/angle valves, fancy type, copper alloy chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair CP 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm all as specified.

Supply and fixing in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified.

Supply and fixing in repairs vitreous china squatting pan, Órrisa Patern' size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified.

S&F in repair Vitreous china wash hand basin (Corner Type) white, flat back including fixing brackets, 32mm waste pipe, 15mm CP pillar taps and waste coupling chromium plated complete all as specifed.

Supply and fixing in repair Stainless steel kitchen plate rack 1.0mm thick of size 750 x 600 x 250mm complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick (kitchen) with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified.

S&F in repairs brass chroumium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in repair bath cabinet of PTMT fixed with and including chromium plated brass screws and wooden cleats size 355mmx455mm complete all as specified.

S&F in repair Stainless steel peg set of 5 size 300x25 & 2mm thick complete all as specified.

S&F in repair 25 mm dia Curtain Rod, chromium plated with fixing brackets, stops, rollers (two nos of brackets/knobs/corners for one length/each opening) etc complete all as specified.

Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified.

Dismantling of 100mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.

Dismantling of 75 mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.

S&F in repairs 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F in repairs 75mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

S&F 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, fixed in wall complete all as specified.

S&F100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed inwith cement joints, laid in trenches or in floors complete all as specified.

S&F100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed in walls complete all as specified.

S&F in repairs 100mm cast iron 'P' or 'S' trap complete all as specified.

S&F in repairs 100mm cast iron cowl complete all as specified.

S&F in repairs 100mm cast iron sanitary connection socket to fit in WC out-let all complete as specified.

Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, then painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00M long GI water tubing up to the wall complete all as specified. Note : (i) Top surface area shall only be measured for payment. (ii) WC and tiles shall be measured and paid separately.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified.

M&L 50 mm thick PCC (1:3:6) type C1 (by using 20mm aggregate) in plinth protectionin alternate bays complete all as specified.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified.

S&F in repair 32mm PVC waste pipe for sink/WHB complete all as specified.

AJEET ENTERPRISES

M/S PIYUSH CONSTRUCTION COMPANY

Bhawani Enterprises

M/S SHREE AAINATH ENTERPRISES