39/2025-26

PHED REVISED BSR 2023/1.2.5 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

300mm DI K-9

PHED REVISED BSR 2023/4.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches of required width and gradient for laying and jointing of pipe lines, including excavation for socket, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the exacavated soil, and then returning the soil as required in layer not exceeding 20cm in depth including consolidation each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 MTR. including all safety provisions etc ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

PHED REVISED BSR 2023/4.5 Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.

M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

300 mm dia

Class PN 1.6

300 mm dia

For Class-AA loading

Sluice valve chamber of size 1.26m x1.185m x1.88m for pipe size-from 200-to-300mm

EFM 300 MM

PHED REVISED BSR 2023/11.4.1 .SITC of Ultrasonic Level Transmitter suitable for measuring water level in reservoir, Normal Powered 24VDC, Type of Transmitter: Two Wire ( 4-20 mA), Cable Entry:1/2" NPT (F), Sensor Material: PP, slip-on Flange: 2 ½” Flange, Material of Construction for Slip-on flange: PP, output 4~20mA, HART compatible, accuracy +/_ 0.2 % as per detailed Technical specification, scope of work and direction of Engineer in charge.

Measuring range 0.0 to 6.0 mtr

For Class-AA loading

Air valve chamber of size0.9m x1m x1.695m for air valve size-from 50 mm-to-80mm

For Class-PN1.6

PHED REVISED BSR 2023/1.1.2&4 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

100 mm (For Mahalaxmi to Gopal Bari & Sar Pratap Colony)

200 mm (In Front of Rajeev Gandhi Station to Meghwal Basti)

PHED REVISED BSR 2023/4.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches of required width and gradient for laying and jointing of pipe lines, including excavation for socket, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the exacavated soil, and then returning the soil as required in layer not exceeding 20cm in depth including consolidation each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 MTR. including all safety provisions etc ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete

Ordinary rock

PHED REVISED BSR 2023/4.5 Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.

M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

100 mm dia

200 mm dia

For Class-AA loading

9.1.1.2 Sluice valve chamber of size 1.17m x 0.95m x1.47m for pipe size-from 125-to-150mm

9.1.1.3 Sluice valve chamber of size 1.26m x1.185m x1.88m for pipe size-from 200-to-300mm

RUIDP BSR 2023/19.81 Providing, installation, testing and commissioning of vacuum Feed Gas Chlorinator system with all accessories and making connection with existing pipeline required including supply & installation of ejector unit, Vacuum chlorination unit, trunnion roller support, auxiliary container valve, flexible copper connector, manifold valve, tonner manifold pipes, chlorine Pressure gauge, Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe with fittings, diffuser, lifting beam, load indicator, 25 NB PP diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for chlorine solution, 25 NB GI pipe for pump suction & delivery, 25 NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type strainer on pump suction, 25 NB GM Check valve on pump delivery, pressure gauge with Isolated valve on pump delivery and chlorine booster pump with motor of required capacity including safety equipment complete in all respect as per specification and the direction of the Engineer

2.2 KW (3 HP), three Ph

Centrifugal Monoblock Pump set (Single Stage)

Non BSR approved by CE (U&NRW) Raj Kaj No 14596354/ dated 05.06.2025. P & F of GSM/GPRS based data transmitter device for water meter compatible to SCADA System.

RUIDP BSR 2023/47.6 Design, Manufacture, Supply, Installation, Testing and Commissioning of Indoor type PLC Panel of size approx. 1000 mm X 600 mm X 2000mm (LBH) , Fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration, necessary programming software for PLC & SCADA and comprising of all accessories not limited to the following:- Programmable Logic Controller (PLC) with Dual Hot Redundant CPU, Power supply, Communication Module, IO & Processor rack (Standard DC), Back up Interface/Expansion Module, Rack (Backplane) 10 slots for IO and Processor. SCADA software shall have facility VPN, OPC, Smart Client, Web Enabled, Automation Report Generation, Archiving, Treands, Data Logging, etc.including following Configuration:

MCB 16A DP

MCB 6A DP

SMPS 100-240V AC/ 4.5A/24 VDC

Control Relays

Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm110VAC, with,

Electronic Hooter

Control Transformer 200VA

Emergency STOP Push Button

Panel Cooling Fan & Filter

Panel Light with Door Switch, 7W

For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Control Indication Lamp for 24VDC, 220VAC

Push Button

Power Wiring+Control Wiring + Control TB/ Fuse 2A,TB etc For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Panel Hardware, lugs, terminations, ferrules, name plate Etc.

UTILITY SOCKET 16A, 3 PIN

HMI Display 15 Inch, Colour

Isolators Dual Output, 24VDC

Ethernet Switch ( Managed)

Operator Station including, Core i5 processor, 8 GB RAM, 1TB SSD, DVD RW Drive, RS- 232/485/RJ45 Port, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, Optical mouse, 32'' LED monitor, Latest windows professional, Anti Virous, etc.

Engineering Station including, Core i7 processor, 8 GB RAM, 1TB SSD, DVD RW Drive, RS-232/485/RJ45 Port, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, Optical mouse, 32'' LED monitor, Latest windows professional, Anti Virous, etc.

Run Time & Development Programming and Troubleshooting software for PLC, HMI, SCADA, VPN, Web Client - OWS

Black and white, A4 Size Laser Printer , copier,scan

Hi-Speed USB 2.0 port; built-in Fast Ethernet 10/100Base-TX network port; built-in WIFI 802.11b/g/n

Online UPS 3 KVA with 60 min Backup time.

Non BSR approved by CE (U&NRW) Raj Kaj No 14596354/ dated 05.06.2025. Maintenace of Scada system for 5 year

OPERATION AND MAINTAINANCE FOR 5 YEAR

PHED O&M BSR 2020 /7.1 Maintainance of Pipelines irrespective of size & material which includes repairing of bursts & leakages pollution control, survey & removal of choking, disconnection of illegal connections, collection & recording minimum 10 nos. residual chlorine samples during daily supply timings interconnections and all works related to pipeline network in existing distribution /rising main pipelines of all sizes by digging out suitable size of pit in soft and loose soil including cutting of black top, WBM & CC Top of road of any size at work site. THis will also include cutting of pipe end, fixing of pipe piece with jointing material to make repair leak proof and then refilling of excavated tench/pit /road shall be done properly i.e. after a layer of 20 cm proper watering and ramming in layers. For entire Job Contractor will use their Own T&P. Contractor with his own resources shall arrange de-watering, JCB & Tractor Compressor if any and restore any amenity at his own cost damaged while performing the work inthis item. The work include daily patrolling and repair and leakages within stipulated time and complete maintainance of pipeline network of rising and distribution pipeline network within the scope of work for per Km Pipeline per month. Jointing Material shall be provide by the department.

Minimum labour for a following kms pipelines to be deployed.

01km to 50 km - one fitter-II & Two Beldar

PHED O&M BSR 2020 /7.8.7 Maintenance of centrifugal pump sets and motor/ Monoblock including cost of rewinding of motor, material components & accessories required to repair pump sets, starters etc. of electric panels, deinstallation and re installation of pump sets complete in all respect for per Centrifugal pump set with panel per month. maintenance of history sheet as directed by Engineer-in-charge for centrifugal pump set per month. Operated load of Centrifugal Pump sets (HP)

41.0 HP to 50.0 HP

PHED O&M BSR 2020 /7.6.1 Running Expenditure of Pumphouse which includes complete operation of pump motor, maintainance of log books as directed by Engineer- in charge, general un-keeping of premises , security arrangement, regular chemical dosing in CWR Cleaning and desilting of SR/CWR/SUMP once in every six month, daily valve operation under the campus of pump house and all other works as mentioned in scope of work in tender document for per pump house per month. (power supply minimum 16 hrs) (excluding repairing of pumping machinary etc.

up to 100 HP

Estimate of Material for O&M

RUIDP BSR 2022/19.58Providing, lowering, laying, aligning, fixing in position and jointing CID- joint class-15 as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer

300 mm dia