AMRUT-2.0 - UWSS to Ottapalam Muicipality - Revamping of Laboratary in Existing Water treatment Plant , Electrification works of pump House, Shift room, teatment Plant , restoration of road over pipe line trench at Treatment plant etc

Amount

Working Charge

OD110184/2024-2025:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

OD110202/2024-2025:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

OD110203/2024-2025:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD110205/2024-2025:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD114414/2024-2025:Supply of 9W bulb

OD114420/2024-2025: Installation, testing and commissioning of ceiling fan/wall mounting fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

OD114437/2024-2025:Supply of wall mounting fans of the following sizes using standard accessories wiring t with 16/0.20 mm PVC insulated and PVC sheathed 650/1100 V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required .400 mm sweep wall mounting fan complete all accessories working om230V/240V single phase A/C

OD114499/2024-2025:Supply and fixing of 36/40 W, 4000 lumen LED, IP 66 street light fitting with aluminium housing, stove enameled CRCA sheet steel reflector cover, acrylic cover complete with THD 0.98, RoHS compliant, duly wired up for use on 230 V AC supply.

OD114617/2024-2025:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm

OD114669/2024-2025:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm

OD114689/2024-2025:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

OD114694/2024-2025:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

OD114721/2024-2025:Supply and Fixing PVC battern/ angle holder including connection etc as required

OD114723/2024-2025:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

OD114725/2024-2025:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

OD114815/2024-2025:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8 way, Double door

OD114862/2024-2025:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD114876/2024-2025:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

OD114895/2024-2025:Supplying and fixing following rating, double pole,240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

OD114898/2024-2025:Supply of indoor industrial surface mounted LED tube and batten along with driver , surge protector,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1600lumen, power factor >0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watt and including all necessary accessories as required complete.

OD114904/2024-2025:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD114932/2024-2025:Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm

OD114958/2024-2025:Supply and fixing of following sizes ofmedium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm

OD115019/2024-2025:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire

OD115168/2024-2025:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 16 sq mm with factory made clamp

OD115169/2024-2025:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm)

OD115501/2024-2025:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)

OD115548/2024-2025:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD115555/2024-2025:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

OD115569/2024-2025:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

OD152652/2024-2025:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x2.5 sq.mm + 1x1.5 sq.mm earth wire

OD152683/2024-2025:Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 32 mm

OD152756/2024-2025:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

OD152805/2024-2025:Installation, testing and commissioning of pre-wired,fluorescent fitting/compact fluorescent fitting of all types , complete with all accessories and tube etc directly on ceiling /wall including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

OD153058/2024-2025:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

OD153243/2024-2025:Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

OD153266/2024-2025:Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

OD153271/2024-2025:Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required.

OD153295/2024-2025:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Lab Equipments

OD153660/2024-2025:Supplying and fixing gratuated measuring cylinder made with borosil Class B with ISI mark of 1000ml capacity including conveyance charges etc complete as per direction of departmental officers.

OD153661/2024-2025:Supplying and fixing Electronic weighing balance with ISI mark Range 0.009 g to 220g, Minimum display - 0.001g, plate size - 100x100mm , Reproducibility 0.001g, Weighing chamber height 210mm, power supply adaptor including conveyance charges etc complete as per direction of departmental officers.

OD153662/2024-2025:Supply, and installation, validation including warranty of three year of Turbidity Meter with the following specifications: Ranges: 0-1000 NTU in 4 Ranges (Automatic) a)0-1 NTU b)0-10 NTU c)0-100 NTU d)0-1000 NTU, Accuracy : ±1.5% OF FSD in 0-500 NTU, ±2% of FSD in 500-1000 NTU, Repeatability : ±1% of FS (Std.), Source : LED, Detector : Photodiode, Display : 2 Line 16 Ch.LCD, Calibration : Formazine Standard Solution, Data Storage : Calibration & Data Stored in Memory, Printer port : Epson Compatiable 80 Column Dot Matrix, Power : 230 Volts ± 10%, 50 Hz, Accessories : Flat Bottom Test tubes (25mm Ø), 4 nos. & Light Shield

OD153663/2024-2025:Supply, erection, installation, validation including warrenty of Digital PH meter MK-VI bench top PH meter with the following specifications and as per NIT. Range : 0.00 to 14.00 PH, Resolution : 0.01 pH, Accuracy : 0.01pH+_1 digit, Input Impedance : 10^12 Ohms, Temp Compensation : 0 to 100 degree celsius manual, Display : 3.5 digit LED display with auto polarity & decimal, Calibration : Two buffers calibration (manually) 7pH & 4pH or 9.2pH, Environment : 5 to 50 degree celsius, Power : 230V Ac+_ 10%, 50Hz, Dimension : 205(W) x 130(D) x 65(H) mm (Aluminium base powder coated cabinet), Weight : 1.5kgs (Approx), Accessories : pH Electrode, Stand, Rod, Clamp & Dust Cover, Warranty : 3 year .

Road Work in WTP

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

4.1.A.2:Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with a motor grader on the prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Grading-II - Plant Mix Method

55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.

Concreting

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

SAHAD (BID ID -2184415)

Bidder Name

SAHAD

IBRAHIM.P.M.