Peravoor Block Panchyath Supply and Installation of Deasal Generator Set and Electrification

Amount

Electrification

OD168683/2025-2026:Supply installation testing and commissioning of " 40 KVA CPCB 4" DG set including Diesel Engine., 4 stroke engine, radiator , turbo charged inter cooled 1500 RPM, prime power rating generator 100% with over load capacity of 10% for one hour in any 12 continuous hours of operation. Engine shall be complete with Blower fan, heavy duty replaceable Paper element filters-fuel, tube oil and by pass, and flywheel to suit single bearing alternator, , Battery charging Alternator etc. Control panel consist of indicating lamps for load on&set running, instrument fuses , meters, MCB etc. Safty control: Low lube oil pressure and high water temperature. Alternator : Stamford or equivalent three phase 30 KVA rated 1500 RPM at 0.8 PF,415V,4wires 50 cycles/sec, brushless type ,self excited , Band of voltage regulation +/-1%of rated voltage from no load to full load . including other accessories such as Approved Acoustic Enclosure: Power coated box witch polyurethane foam for noise absorption canopy , battery 12V dry with leads and terminals), battery charger, indicator, Alarm,Trip, Fuel Tank: (complete with level indicator,fuel inlet and out let,air vent,inlet arrangement for direct filling and required length of fuel hoses).Ventilation system, radiator, silencer, Base frame etc. fixed on existing/proposed cement concreate bed as required. (Engine make- qumins or eqvt.) Loading &unloading charges are also included.

90.12.5.43:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 35 sq mm

90.12.7.43:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 35 sq mm with factory made clamp

OD136838/2025-2026:Supply and providing 5 Kg. Dry ABC type Fire Extinguisher with hose and clamps including fixing it to wall as required.

OD136839/2025-2026:Supply and providing 2mm thick,1 mt. wide electrical grade chequered type insulation mat to withstand3.3 KV dielectric strength conforming to IS15652/06.

9.2.31:Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.24.7:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.35 sq mm

2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

90.14.10.3:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

OD136867/2025-2026:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x10 sq. mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.6:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.6:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.6. mm ( 4 SWG)

OD150375/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 25 x 3mm brass bolt & nut

OD150407/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of ,100 Amp TP&N disconnector fuse switch unit with m63 A HRC fuse fixed on suitable size cubicle box made out 1.60 mm CRCA sheet of suitable size to match the switch gear and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required.

OD136835/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of 63 A, AC 23 A, 4 pole on-load COS fixed on suitable size cubicle box made out 1.60 mm CRCA sheet of suitable size to match the switch gear, provision for providing 2 sets indication lamps and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required.

OD136872/2025-2026:Supply and providing100-A 2 way Neutral link mounted on DMC/ SMC base and giving connection on existing panel board.

OD136873/2025-2026: Supply and providing100 A HRC Fuse with 63 A Fuse link and giving connection on existing panel board.

OD136834/2025-2026:LED indicators for all voltage ranges - Red, Green &blue Colour

1.22.7:Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.200 mm X 150 mm X 60 mm deep

OD136829/2025-2026: Supply and providing Flush head actuator - Green with legend "START" with 1 NC contact. with giving connection as required.

OD136836/2025-2026: Supply and providing Flush head actuator - Red with legend "STOP" with 1 NC contact. with giving connection as required.

OD136831/2025-2026: Installation charge of proposed DG set in the proposed concrete basement,,trail run etc. and giving connection,Preparation charges for sketch, schimatic diagram, load details and schme approval from kerala State Electrical Inspectorate and inspection charge for approvel from Inspectrate etc.

2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

G S ELECTRICALS (BID ID -2399751)

AYKO TOOLS (BID ID -2396448)

Bidder Name

G S ELECTRICALS

KOLAR MILL STORES

AYKO TOOLS