REPAIR CLEANING LAYING TO SEWAGE LINES MANHOLES SEPTIC TANK DRAIN FENCING COMPOUND WALL PATH HARD STANDING ETC IN POCKET 7 AND 8 IN AGE BR-III UNDER GE ROORKEE

Amount

M&L for cleaning of blocked/chocked sewer pipe line of 100 mm dia from WC/Gully trap to manhole etc or from cleaning eyes in any depth by rodding and well flushing the complete line including removing of sludge /waste to low lying area within 200 m distance and burrying the same properly to the entire satisfaction of Engineer-in-Charge including taking out and re-fixing of manhole cover complete all as specified and directed. Note for item No.1 to 6 : The Contractor or his accredited representative/ supervisor will report to the I/C Maint of AGE B/R-III at 8.30 AM on every working day to collect the complaint slips and will report the completion to the concerned JE on the same day. All blockages/complaints to be cleared within 24 Hrs. If any blockage is not cleared within 24 Hrs, a panelty of Rs 250/- per complaint shall be imposed to the cotractor for every day of delay.

M&L for cleaning of blocked/chocked sewer pipe line of 150 mm dia from manhole to manhole or from cleaning eyes in any depth by rodding and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burrying the same properly to the entire satisfaction of Engineer-in-Charge including taking out and re-fixing of manhole cover required complete all as specified and directed.

M&L for cleaning of blocked/chocked sewer pipe line of 100 mm dia sewage line by SEWER JETTING CUM SUCTION MACHINE and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burrying the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers complete all as specified and directed.

M&L for cleaning of blocked/chocked sewer pipe line of 100 mm dia sewage line by SEWER JETTING CUM SUCTION MACHINE and well flushing the complete line including removing of sludge /waste to low lying areas within 200m distance and burrying the same properly to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers complete all as specified and directed.

M&L for cleaning of blocked WC nahani trap of bathroom, kitchen & WHB including cleaning line from WC trap upto first manhole complete all as specified and directed.

Taking off existing covers of soak well/ septic tank/ manhole and cleaning by mechanical suction pump tanker of capacity 3000 Ltrs and laying/ throwing out of MD land at approved locations as per arrangements made by the contractor and placing back in position the removed covers and set in cement mortar (1:4) complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide & n.exc 1.50 m in depth for foundation or for manholes, cesspits, shafts etc not exc 10 Sqm on plan and getting out in soft / loose soil, complete all as specified and directed.

Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for SGSW drain pipe of 200 mm internal dia, grade `A', laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed by Enginner-in-Charge.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregrate) as in bed to 200mm internal dia SGSW drain pipes including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed by Enginner-in-Charge.

M&L for brick work with old size sub class ‘B’ bricks in cement mortar (1:4), straight or curved on plan exc 6 m mean radius including demolition of brick work or stone / boulder masonry built in cement mortar complete all as specified and directed .

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and Labour for rendering 15 mm thick cement plaster in cement mortar (1:4) on fair faces of brickwork or concrete surfaces in walls and finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping, bed plates, bed blocks for hold fasts, apex stones and the like with plain fair faces including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

S&F in repair 110mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) branch piece (single or double) with access door suitable for 110mm bore pipecomplete all as specified and directed.

S&F in repair 110mm dia bore PVC (SWR) junction single (Single T), equal or unequal with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with outlet of 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) Type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete for manhole etc complete all as specifid and directed.

M&L PCC 1:3 :6 type C-1 (using 40mm graded stone aggregate) as in surface channel & drain complete all as specified and directed.

M&L for precast reinforced cement concrtete (1:2:4) type B-1 (using 20mm graded stone aggregate) in manhole covers including necessary form work and fixing in postion set in cement mortar (1:4) complete all as specified and directed.

S&F mild steel TMT reinforcement bars 6 mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repairs 10 Ltrs PVC (White) valve less syphonic action type, low level flushing cistern with inlet, ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

Extra for forming fair finished drains & channels 30 cm inner girth in cement concrete, using extra cement, including forms, moulds etc complete all as specified and directed. (Inner girth only measured).

S&F in repair vitreous china sqatting pan of (Orissa pattern) "long pan", size 580mm white with cast iron `P' or `S' trap, front or back inlet and with integral foot rests any pattern including demolition of existing WC seat etc, and making good PCC/Terrazo/Non skid ceramic tiles floor to match with the existing floor and making connection to flush pipe etc complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including taking down old tiles complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X 7 mm/ 450x 300 x7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick rendering in CM 1:4 including taking down old tiles complete all as specified and directed.

Demolition of concrete/tiles/kota etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed complete all as specified and directed.

M&L cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for Hardcore of gauge n exc. 63mm with broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L 100 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed.

M&L for pavement ceramic tile (min size 300 x 300 mm) and 8 to 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed in CM 1:4 on 25 mm thick PCC 1:2:4 Type B-0 using 12.50mm graded stone agg complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed natural ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed in Concrete, brick work, masonry, etc ground complete all as specified and directed.

Excavating in post holes in Hard/dense soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance N.exc 50 m and making good surface complete all as specified and as directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165) complete all as specified as directed.

Dismantling fencing wire mesh of any type and of any description complete all as specified as directed.

Supply only Chain link MS galvanisd fencing any size any type weight not exceeding 3.00 Kg/ Sqm complete all as specified as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing & straining and fixed to any type of standard rail incl securing or tying at crossing with and provision of galvanised MS wire staple or steel pins including dismantling Barbed wire any description complete all as specified and directed by Engr- In - Charge.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 and including Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Material and Labour for applying two coat of synthetic enamel paint over a coat of red oxide on steel surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistant primer complete all as specified and as directed.

R.S BUILDERS

NITHYA INFRATECH

M/s RAM RATAN AND SONS