Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹5.9 L+₹81,811.50 (16.1%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | BABU ENGINEERING AND FABRICATORS L2 | SAI INFRAS L1 |
|---|---|---|---|---|---|
| 1.00Replacement of 300 mm dia pipeline (North side) at STP road leading from AKP level crossing to NALCO level crossing near STP on Yerrigedda road bridge wing wall tilted towards North side causing structural damage | |||||
| 1.01 | Dismantling removal of submerged pipe from Yerri gedda culvert, de jointing and dismantling the existing structures by gas cutting equipment and without damaging the surround structures and handling over to department to a suggested place complete and as directed by the officer- in- charge of VPA. | 72 | Rmt | 252 ₹18,144 Lowest | 700 ₹50,400 |
| 1.02 | Supply of JCB (3D) Earth mover for excavation/leveling and removing debris/earth etc., including fuel, operator charges and incidental charges etc., as directed by the Engineer-in-Charge. All labour and equipment spares etc, complete (Payment will be made for number of hours worked at site only) | 16 | Hrs | 1,260 ₹20,160 | 800 ₹12,800 Lowest |
| 1.03 | Supply of MS Angles at 100x100x8 mm of work, including transportation, loading, unloading, stacking at a place shown and painting with two coating red oxide anti-corrosion paint etc as required and as directed by the Engineer-in-Charge complete. All labour and materials. | 0.54 | Ton | 10,000 ₹5,400 Lowest | 90,000 ₹48,600 |
| 1.04 | Supply of MS plate 12 mm of work, including transportation, loading, unloading, stacking at a place shown and showing painting with two coating red oxide anti-corrosion paint etc as required and as directed by the Engineer-in-Charge complete. All labour and materials. | 0.4 | Ton | 10,000 ₹4,000 Lowest | 90,000 ₹36,000 |
| 1.05 | Fabricating, Welding or riveting or bolting steel built up section, trusses and framed work including cutting, drilling holes, hoisting, fixing in position and applying a priming coat of red oxide paint of dry film thickness of 70 + 5 microns etc as required and as directed by the Engineer-in-charge complete. All labour and materials, but excluding cost of steel. | 0.94 | Ton | 10,000 ₹9,400 Lowest | 24,000 ₹22,560 |
| 1.06 | Department will supply the MS pipe of 300 mm dia available at STP., each pipe of 12 Mtrs length to site of work including loading, transportation, unloading and stacking at a place shown, as required and as directed by the Engineer-in-Charge complete. All labour and materials derusting, applying one coat primer and finish coat paint. (70 Mtrs (appro)) | 70 | Mtrs | 756 ₹52,920 | 320 ₹22,400 Lowest |
| 1.07 | Manufacturing and supply of SS Bolt, Nut & Washers etc., complete as per approved design and as per site conditions with all material, labour, conveyance, loading and unloading up to site etc, complete and as directed by the Officer-in-charge of VPA | 60 | Kgs | 420 ₹25,200 | 150 ₹9,000 Lowest |
| 1.08 | Laying of MS pipeline of 300 mm dia (Heavy grade) to required level and alignment in pipeline trenches/cable ducts (below ground level up to 1.5 m depth) including cutting of old pipe to suit for jointing including welding as per standards. All tools and plants including electrical generator for power, jointing pipes using specials like flanges, collors short or long wherever necessary including testing and commencing, refilling the trenches as necessary etc as required and as directed by the Engineer-in-Charge complete. All labour charges excluding cost of pipes and fittings.(70 Mtrs (appro)) | 70 | Mtrs | 420 ₹29,400 Lowest | 620 ₹43,400 |
| 1.09 | Drilling horizontal holes in RCC with diamond core drilling machine wherever required including necessary scaffolding platform etc., and cleaning the drilled hole with blowing air/hot air etc., as required and as directed by the Engineer-in-Charge complete including all hire and operational charges of equipment machinery etc, up to 150 mm dia hole. | 800 | MM | 84 ₹67,200 | 40 ₹32,000 Lowest |
Tender Value
₹7.0 L
EMD Value
₹14,046
Closing Date
15 Sept 2025, 4:30 pmClosed
MM DY.CME
MM DY.CHIEF MECHANICAL ENGINEER, Mechanical Electrical Engineering Department, 2nd Floor, Administrative Office Building, Visakhapatnam Port Authority, Visakhapatnam
Replacement of 300 mm dia pipeline (North side) at STP road leading from AKP level crossing to NALCO level crossing near STP on Yerrigedda Road Bridge wing wall tilted towards North Side causing structural damage
2025_VPT_246284_1
47/IMEE/MOF/MECHII/STP/F30 Dt.25.08.25
Open Tender
Miscellaneous Works
Item Rate
62 days
VISAKHAPATNAM PORT AUTHORITY
Please refer Tender documents.
2 documents required · 2 mandatory
₹472
Yes
₹14,046
Yes
26 Sept 2025
25 Aug 2025
16 Sept 2025
25 Aug 2025
15 Sept 2025
25 Aug 2025
Amount
Replacement of 300 mm dia pipeline (North side) at STP road leading from AKP level crossing to NALCO level crossing near STP on Yerrigedda road bridge wing wall tilted towards North side causing structural damage
Dismantling removal of submerged pipe from Yerri gedda culvert, de jointing and dismantling the existing structures by gas cutting equipment and without damaging the surround structures and handling over to department to a suggested place complete and as directed by the officer- in- charge of VPA.
Supply of JCB (3D) Earth mover for excavation/leveling and removing debris/earth etc., including fuel, operator charges and incidental charges etc., as directed by the Engineer-in-Charge. All labour and equipment spares etc, complete (Payment will be made for number of hours worked at site only)
Supply of MS Angles at 100x100x8 mm of work, including transportation, loading, unloading, stacking at a place shown and painting with two coating red oxide anti-corrosion paint etc as required and as directed by the Engineer-in-Charge complete. All labour and materials.
Supply of MS plate 12 mm of work, including transportation, loading, unloading, stacking at a place shown and showing painting with two coating red oxide anti-corrosion paint etc as required and as directed by the Engineer-in-Charge complete. All labour and materials.
Fabricating, Welding or riveting or bolting steel built up section, trusses and framed work including cutting, drilling holes, hoisting, fixing in position and applying a priming coat of red oxide paint of dry film thickness of 70 + 5 microns etc as required and as directed by the Engineer-in-charge complete. All labour and materials, but excluding cost of steel.
Department will supply the MS pipe of 300 mm dia available at STP., each pipe of 12 Mtrs length to site of work including loading, transportation, unloading and stacking at a place shown, as required and as directed by the Engineer-in-Charge complete. All labour and materials derusting, applying one coat primer and finish coat paint. (70 Mtrs (appro))
Manufacturing and supply of SS Bolt, Nut & Washers etc., complete as per approved design and as per site conditions with all material, labour, conveyance, loading and unloading up to site etc, complete and as directed by the Officer-in-charge of VPA
Laying of MS pipeline of 300 mm dia (Heavy grade) to required level and alignment in pipeline trenches/cable ducts (below ground level up to 1.5 m depth) including cutting of old pipe to suit for jointing including welding as per standards. All tools and plants including electrical generator for power, jointing pipes using specials like flanges, collors short or long wherever necessary including testing and commencing, refilling the trenches as necessary etc as required and as directed by the Engineer-in-Charge complete. All labour charges excluding cost of pipes and fittings.(70 Mtrs (appro))
Drilling horizontal holes in RCC with diamond core drilling machine wherever required including necessary scaffolding platform etc., and cleaning the drilled hole with blowing air/hot air etc., as required and as directed by the Engineer-in-Charge complete including all hire and operational charges of equipment machinery etc, up to 150 mm dia hole.
Grouting of drilled holes (horizontal) i.e face of the berth/culvert walls etc, with polyester resin lockset (P/S/L) or any other approved equivalent to suit site conditions add placing the stud/bolt in drilled holes duly making in built notch cutting to allow the refusal from the drilled hole. After completion of initial setting the plate washer/ring shall be removed from the bolt etc.as require and as directed by the Engineer-in-Charge complete. All labour and materials, but excluding cost of bolt/stud.
Supply of Hydra Crane 8.0 ton to 10.0 ton on hire basis at site of work including operator, helper and fuel charges etc., as directed by the Engineer-in-Charge complete.
Supply of motor truck for the transportation of all sorts of materials such as sand, gravel, metal, cement, boulders etc., (payment will be made for number of hours worked at site)
Supply, Fabrication, handling and transportation of M S specials (Confirming to IS specification) to the various site locations /operational areas as directed by the Engineer-in-Charge complete. The cost inclusive of material, fabrication, labour, transportation, handling and hoisting position charges etc, complete. a) 300 mm dia MS flange, 15 mm thickness
Supply, Fabrication, handling and transportation of M S specials (Confirming to IS specification) to the various site locations /operational areas as directed by the Engineer-in-Charge complete. The cost inclusive of material, fabrication, labour, transportation, handling and hoisting position charges etc, complete. b) 300 mm dia MS 45 Degrees flanged bend
Supply, Fabrication, handling and transportation of M S specials (Confirming to IS specification) to the various site locations /operational areas as directed by the Engineer-in-Charge complete. The cost inclusive of material, fabrication, labour, transportation, handling and hoisting position charges etc, complete. c) 300 mm dia MS pipe, 10 mm thick
Supply, filling and laying of sand bags to create bund for safe working environment and to by-pass the sewer water at the time of dismantling old one and erection of new gates including all materials, labour, conveyance, loading and unloading up to site etc, complete and as directed by the Officer-in-Charge of VPA
Charges for bailing of water from the working area to create safety environment to fabrication works etc., complete with electrical/oil engine driven pump sets including all material, labour, conveyance, loading and unloading up to site etc, complete and as directed by the Officer-in-Charge of VPA
Charges for removal of submerged pipe from Yerrigedda culvert, making scaffolding arrangement, de-jointing and dismantling the existing pipe by gas cutting equipment and necessary civil structure cuttings, lifting of damaged MS pipe structure by deploying necessary machinery, labour etc., transportation and handing over to department to a suggested place complete and as directed by the Officer -in-Charge of VPA
BABU ENGINEERING AND FABRICATORS (BID ID -900712)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .