KMDA/E-M/EE/MD-I/NIT No.- 08 of 2025-26

PART-I (Contractor's % not allowed in this part)

Round the clock operation & minor maintenance of the Pumping Station with adequate nos of personnel for each month as per direction of the EIC. a) 8 Nos personnel for 01 month i.e., 8X1=8 Man/Month.

Round the clock operation and minor maintenance for the additional 2 (Two) holidays of the Pumping Station with these existing personnel as per direction of the EIC. a) 1 No personnel for 01 month i.e.,1 Man/Month.

Checking of all the Mechanical parts and preventive maintenance of all pump machineries as per technical specification and scope of work and direction of the EIC. (Twice in week)

Checking of all the Electrical parts including Battery Bank and preventive maintenance of all pump machineries as per technical specification and scope of work and direction of the EIC . (Twice in week)

Supervision of all the staffs & look-after the entire pumping station to ascertain the overall condition of all the electro-mechanical equipment and conveying the same to the EIC or his authorized representative and to carry out the instructions given by them within the stipulated time frame. (Twice in week)

Add GST @ 18%

Add LWC @ 1%

PART-II

Supplying of the following consumable materials for minor maintenance of all the Electro-mechanical equipment.

Supply of Grease

Indicating Lamp for Panel Only

HRC fuse link ( 2-16 ) Amp.

Fuse Holder 20 Amp

Supply of MCB

Battens for 20W LED tubes[Make : - Phillips or equivalent]

20W LED Tube [Make : - Phillips or equivalent]

LED Flood light luminaire 120 Watt [Make : - Phillips or equivalent]

LED Midbay luminaire 100 Watt [Make : - Phillips or equivalent]

Cleaning of the Pump House & the equipment including supply of consumable like soap, phenyl Duster , mop etc.

Lifting of the submersible pump-motor set from its original position after disconnecting the LT power connection from the motor and disconnecting discharge branch from the delivery line and other component / accessories and dismantle the pump-motor set for detection of fault thoroughly if necessary. Inspection and checking for finding out the damaged spare parts, required rectification and placing them in a safe position to make it ready for further maintenance process as per direction of EIC.

Minor repairing & rectification of already dismantled components of pump-motor set and re-installing it with other accessories etc to its original position, making re-connection with discharge pipe line , including supply of new gaskets, S.S fasteners etc, re-establishing LT power connection with the motor & commissioning the system complete as per direction of EIC.

Add GST @ 18%

Add LWC @ 1%

Please Enable Macros to View BoQ information