Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.2 LAccepted-Finance AT NEW TOWN POST P S DIST JAMTARA | JAMTARA | JHARKHAND | 814166 | L1 | Accepted-Finance Due to Quoting the lowest price. | |
| 2 | L2₹74.3 L+₹6,102.01 (0.08%)Rejected-Finance AT STATION ROAD JAMTARA JHARKHAND 815351 | JAMTARA | JHARKHAND | 815351 | L2 | Rejected-Finance Due to Quoting the second lowest price. |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
30 Dec 2022, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE OFFICER, JAMTARA NAGAR PANCHAYAT
JAMTARA NAGAR PANCHYAT
CONSTRUCTION OF HEATH AND WELLNESS CENTRE UNDER NAGAR PANCHAYAT JAMTARA
2022_UDD_64204_1
NPJ/F2/14/22-23
Open Tender
Civil Works
Item Rate
270 days
JAMTARA NAGAR PANCHAYAT
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
EXECUTIVE OFFICER, NAGAR PANCHAYAT JAMTARA
₹1.5 L
Yes
20 Feb 2023
24 Dec 2022
31 Dec 2022
24 Dec 2022
30 Dec 2022
24 Dec 2022
Amount
EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in all kinds of Ordinary Soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.
Extra for earth work in hard soil as per specification & dirction of E/I. (Vide classification of soil item B)
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
Providing coarse clean lical sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with leads and 1.5 in
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building spedification and diection of E/I.
Providing and laying in position cement concrete of soecified grade excluding the cost of centering and shuttering-All work up to plingh level 1:4:8 (1 cement :4 coarse sand (Zone-III :8 graded stone aggregrate 40mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finshing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (Zone-III): 3 graded stone aggregate 20mm nominal size)
Reinforce cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc. Above plinth level up to floor five leve, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) :3 graded stone aggregate 20mm nimonal size)
Reinforced cement concrete owrk in beams, suspended floors, roofs having slope up to 150 landing, balconies, shelves, chajjars, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five level, excluding the cost of centeri, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III): 3 graded stone aggreagte 20 mm nominal)
Providing Tor Steel reinforcement of 8mm dia rods as as per approved design & drawing -do- -do- TMT Fe 500 (Only valid for SAIL & TATA Steel 20%
Providing Tor Steel reinforcement of 10mm dia bars as per approved design and drawing -do- -do- 15%
Providing Tor Steel reinforcement of 12mm to 20 dia bars as per approved design and drawing -do- -do- 65%
Centering and shuttering including struting, propping etc and removal of form for foundation, footings, bases for columns, etc. For mass concrete
Columns, Pillars, Piers, Abutment, Post and struts
Lintels, beams, Plinth Beams, girders, Bressumers and cantilevers
Walls (any thikness) including attached pilasters, buttersses, plinth and string courses etc.
Suspended floors, roof, landings, balconies and access platform.
Providing designation 75B brick work in CM (1:6) in foundation and pling with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per buildding specification and direction of E/I.
Providing designation 100A B/W with Fly Ash Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints cost of screening, raking out joints to 15mm depth, curing, taxes sand royalty all complete as per building specification and direction of E/I.
Providing designation 112mm thick reinforced designation 100A B/W with Fly Ash Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes sand royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidesed iron fittings such as hinges, lowerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
Prividing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :(50x20mm)
Providing and fixing bright finished brass 100mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) Aluminium lever handles of approved quality with necessary screws etc. complete.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than graded AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. complete
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having band logo with ISI, IS:3564, embossed on the dody,, door weight upto 36kg to 80 kg and door width from 701mm to 1000mm with double speed adustment with necessary accessories and screws etc. complete.
Stuctural steel work in single section, fixed with or without coneecting plate, including cutting, hoisting, fixing in position and applying a primina coat of approved steet primer all complete.
Providing and fixing pressed steel door frames conforming to IS:4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by E/I.
Supplying, fitting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/i.
Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2mm at 10mm centers and braced with M.S. flat diagonals 20x3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.
Supplying fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I. (5.5mm thick Glass)
Providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622/ISO: 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1:4 9(1 cement: 4 coarse sand) jointing with grey cement [email protected]/sqm including grouting the joints with white cement and matching pigments etc., complete sise of tile 600x600mm
Providing and fixing granite 18mm thick gang saw cut, mirror polished, premoulded and prpolished, machine cut for flooring, kitchen platforms, vanity counters, window sills, facias and similar locations of requied size, approved shade, colour and txture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing edge moulding to 18mm thick marble/granite stone counters, vanities etc., inlcuidng machine polishing to edge to give high gloss finsh etc. complete as per design approved by E/I.
Extra for providing opening of requied size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout of with cement concrete 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggreagate 6mm nominal size) as per direction of E/I.
Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer in wall over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white, lvory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigment etc. complete.
Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (Lime putty: Surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab inlcuding rubbing and polishing to granolithicc finish with approved quality of carborandum stone including cost of curring, taxes and royalty all complete as per building specification and direction of E/I. 600x600mm size
Providing and laying 25mm thick kotah stone riser of steps, skirting and pillers of apporved size, texture and colour over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curring, taxes and royalty all complete as per building specification and direction of E/I. 600x600mm size
Providing single layer Naria-tiles in roof including cost of all labour and materials, taxes, all complete as per building specification and direction of E/I.
Providing gola 75x75mm in cement concrete 1:2:4 (1 cement: 2coarse sand : 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design:
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C. Sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and coat of neat cement, rounding the edges and making and finishing the outlet complete
Water proofing for Old and New Roof Slab :- Providng and laying water proofing treatment on roof slab by applying tow component, factory a designed ready to use, acrylic modified flexible material applied with brush, roller or spray waterproofing coating as per manufacturer specification-With following steps:- (a) Suface preparation:- Providing and cleaning of concrete surface to remove dust, iol, grease including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools, complete. Ponding test to be done after pugging all outlets and to be cheded from soffit to identify seepage, ladkage. On indentification of seepage, cement grouting to be done with non shirnk expanding admixture of Sika India Pvt. Ltd. / MYK Schombeg/Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joints usch as those between the parapet wall and the roof slab etc. Shall be chamfered with '150mmX'150mm fillet lf mortar (Cement sand- 1:4) admixed with acrylic polymer of Sika/Fosroc/MYK Schomberg/Dr Fixit or requivalent Before chamfering a prime coat shall be give with the slurry of acrylic polymer Reparing surface irregularities, damaged concretein base slab, dead cracks if any, with and acrylic polymer modified reqpair mortar including a coat of bonding agent of the same with cement slurry including all materials labour, tools, complete.(b) 1st Coat :- Apply 1st coat of two component acrylic modidied, ready to use, flexible cementitious material on surface saturated dry roof and inisde wall of Parapet wall upto 600mm by brush or roller. After 1st coat of application, 45 gsm oil Fibre glass cloth to lay when the fist layer is still greeb. 1st ciat sgiykd ve aookued @1.50/kg/sqmt/coat for the purpose of measurement the entire treated surface will be measured."(c) 2nd Coat :- To apply the 2nd coat of two component acrylic modified ready to use flexible cementitious materials right angle to the '1st coat over the glass fibre laid surface. 2nd coat should be applied@ 0.7kg/sqmt/coat. For the purpose lf measurment the entire treated surface will be measured." alter three days of drying the 2nd coat, the rain water outles to be plugged and ponding test to be done for 48 hours to identify seepage, teakage from soffit and if found necessary rectification to e be done as per satisfation of E/I.The Watqrproofing Brand: *Sika Topseal 109hi/Fosroc Brushbond RFX/ Dr Fixit Pidiffine 2KI MYK Aqraiin TG Product Performance- Chemical Base Part A.Acrylic copol,mer, Part 13 Specially graded cementitious powder-Density 1.6 kg/l (mixed density) at +270 Tensile Strength -2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strenth-2 n/mm2 (concrete failure) (According to ISO.)4624) Slant-shear Bond Strength-4 N/mm2 (According to FIP 5.15) Flongation at Break- 35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTMD 2370)D Protection of treated with PCC :- The treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) towards the rain outlets in altematepanels lf 2mtx2mt keeping 6mm gap between the panel joint integral water proofing admixture conforming to IS2645@ of 100 ml perbag of cement to be added in the screed concrete (paid separately for this items)all corners shal be charfered with 150mmx150mm fillet. The rain water outlets shal be just leveled with the scree concrete to ensure smooth descharge of water- the perpheral gaps between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensisive epoxy putty of Sika India Pvt.Ltd./IVIYK Schomberg/Dr Fixit / Fosroc. For the purpose of measurement the entire treated surface will be meaured."(e) Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand-Sika India Pvt. Ltd./MYK Schomberg/ Dr Fixit/Fosroc
Covering of treated surface with PCC :- Providing 25mm thick Cement Concrete M-20 (1:1.5:3) raintaining slope in alternate 2 mix 2mt. Panels with approved quality of stone chips of 20mm to 6mm size graded and cleaned sand of F.M. 2.5 to 3 including screening, shuttering and mixing erite nt concrete in mixe with admixture of integral water proofing and placing, position, striking royalty all complete as per building specification and direction of E/I.
Providing and filling of Groove between 25mm PCC Panels with Polyshlphide Sealant (Poring Grade) as per drawings and technical specification and direction of E/I.
Toilet/Kitchen Water proofing. 1) Surface preparation by grinding machine, cleaning, crack filling etc. Complete. Providing and laying water proofign treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying. (a) First laying of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement [email protected] kg/sqm this layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @0.242 kg/sqm. mixed with water proofing cement compound @ 0.126 kg/sqm this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, comers, junctions of pipes and masonry with polymer mixed slurry.
Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I
Providing 6mm thick cement plaster (1:4) in ceilling with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Add fir plaster drip course/groove in plastered surface or moulding to R.C.C. Proujections.
Finishing wall with Acrylic Smooth exterior paint of required shade, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat lf exterior primer applied @2.20kg/10 sqm)
Providing tow coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolidng washing of floors and taxes all complete as per building specification and direction of E/I.
Painting primer one coat of red lead paint of approved brand and manufacture to give and even shade.
Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.
Finishing walls with Acrylic Smooth exterior Local Art Paint of required shade, New work (Two or more coat applied oeve and inluding priming coat of exterior primer applied as per E/I.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/approvpriate Z sections and other sections or apporved make conforming to IS: 733 and IS:1285, fixing with dash fasteners or required dia and size including necessary filling up th gaps at junction, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium section shall be smooth, rust free, staight, mitred and jointed mechanically wherever required including cleat angle, Aluminium sanp beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per specification and direction of E/I.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominla size) over 75mm thick bed of dry brick ballast 40mm nominal size, wall rammed and consolidated and grouted with fine sand including necessary excavation, levelling & dressing & finishing all complete as per specification and direction of E/I.
Providing and fixing circular/hexagonal cast iron of M.S. Sheet box for ceilling foa clamp, of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. Sheet with its top surface hacked for prper bonding, top lid shall be screwed into the coat iron/M.S sheet box by means of 3.3nn dua riybd geaded screwsm ibe kicj at tge cormers, Clamp shall be made lf 12mm dia M.S. bar bent to shape as per standard drwaing.
Bricks - (Lead- 2k+43p =45Km)
Fly Ash Brick (Lead- 2k+43p =45Km)
Sand- (Lead- 02k + 10 P =12Km )
Stone Chips/Aggregates (Lead- 02k+23 P =25 Km)
Cement- ( Lead-05 Km)
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15 liters C.I. Pull and let go flushing cistern of names or other I.S.S.equipment make, complete with all fittings, C.I. or C.c. brackets 32mm alkathene/P.V.V. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull inlcuidng supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. dody brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificaiton and direction of E/I.
Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C. With 'P' trap of parry Hindustan or any othe approved I.S.S. Make including supplying and fixing 15 litres C.I. Mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescope flush pipe with brass coupling and plumbers joint spindla stop cock of approved uality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm long with bras coupling at both ends and white/blcok plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinger or screws etc. pain over a coat of red oxide priming all complete as per specification and direction of E/I. (b) With 10 ltr low level PVC cistern
Providing and fixing wash basin with C.I. Rackets, 15mm C.P. Brass pillar taps, 32mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15mm C.P. Brass pillar tasp.
Supplying, fitting and fixing the following items complete with all materiasl as per specification and direction of E/I. (a) glass shelf with C.P. Brass rail (i) 600x125mm glass shelf complete
Providing and fixing PTMT Bottle Trap fow Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270mm effective length of tail pipe 260mm from the entre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less the 260 gms.
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the samd materials with snap fitting aof approved quality and colour wieghing not less than 105 gms.
Providing & fixing PTMT towel ring trapezoidal shape 215mm long 200mm wide with minimun distance of 37 mm from wall face with concraled fittings arrangement of approved quality and colour weighing ont less than 88 gms.
Providing and fixing C.P. Brass Bib Cock of approved quality conrorming to IS 8931
Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conrorming to IS 8931 a) 15mm nominal bore.
Providing and fixing toilet paper holder: C.P. brass
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion, (i) Singls socketed pipes. 75 mm diameter
110 mm diameter
Providing and fixing on wall face unplasticised-PVC moulder fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13595 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion.
Single tee with door 110x110x110mm
Shoe (Plain)
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) sand making good the wall etc. complete. 75mm dia
110mm dia
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting inlcuding fixing the pipe with clamps at 1.00 mt spacing. This includes jointing of pipes and fittins with one step CPVC solvent cement and testing of joints complete as per direction of E/I. Internal work-Exposed on Wall 20mm nominal outer dia pipes
25mm nominal outer dia pipes
32mm nominal outer dia pipes
40mm nominal outer dia pipes
50mm nominal outer dia pipes
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting inlcuding fixing the pipe with clamps at 1.00 mt spacing. This includes jointing of pipes and fittins with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and mkaing good the wall ect. 15mm nominal outer dia pipes
20mm nominal outer dia pipes
25mm nominal outer dia pipes
32mm nominal outer dia pipes
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI :12701 marked with cover and suitable locking arrangement and making necessary hole for inlet, oulet and over flowpipes but without fitting and the base support for tank.
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch, modutar plate, suitable GI box etc as required. Group C
Wiring for light/power plug with 2x4 sq. mm FR PVC inslulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 No. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for light/power plug with 4x4 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 2 No. 4 sq. mm FR PVC insluated copper conductor single core cable for loop earthing as required.
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 sqmm+ 1x1.5 sq mm earth wire
2x2.5 sqmm+ 1x2.5 sq mm earth wire
4x2.5 sqmm+ 2x2.5 sq mm earth wire
4x10 sqmm+ 2x6 sq mm earth wire
Supplying and drawing co-axial TV cable RG-6 grade, 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.
Supplying and fixng of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm dia
25mm dia
Supplying and fixing following modular switch/socke on the existing modular plate & switch boc including connections but excluding modular plate etc. as requied 5/6 amps one way switch
15/16 amps one way switch
5/6 amps 3 pin socket outlet
15/16 amps 6 pin socket outlet
TV anteena socket outlet
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch boxk including connections but excluding modular plate etc. as required.
Supplying and fixing modular blankig plate on the existing modular plate & switch box excluding modular plate as requied
Supplying and fixing following size/modules GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (78mm x 78mm x 45mm)- for Telephone & TV outlet.
4/5 module (78mm x 140mm x 50mm)
6 module (78mm x 205mm x 50mm)
Supplying and fixing 2 pin 5 amp ceilling rose on the existing juction box/wooden block including connection etc. as required.
Supplying and fixing brass batten/angle holder including connection etc. as required.
Supplying and fixing Ding dong sound call ball single phase, 230 volts,
Installation, testing and commissioning of ceilling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor sing core cable etc. as required.
Installation of exhaust fan up 450nn sweep in the existing opening including making the hole to suit the size of above the fan making good the damage, connection, testing, commissioning etc. as required.
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet with 2 pole and earth, metal enclosed plug top alonwith 20 amps "C"curve, SP, MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the socket out let and complete with coneection, testing and commissioning etc. as requied.
Supplying and fixing following ways horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din dar, interconnections powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)8 way (4+24) Double Door Horizontal Type
Supplying and fixing 6 amp to 32 amp rating 240 volts, 10KA "C"curve miniture circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amp single pole
40 amp TPN
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing of following rating double pole (Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connection, testing & commissioning etc. as required. 40 amps
Earthing with G.I. With plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclousre with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
Providing and fixing 25mm x 5mm G.I. Strip on surface or in recess for connections etc. as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as required.
Supplying of XLPE insulated PVC shearthed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS:7098 (Part-I) 4 core 16 sq. mm.
Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required. 1 run of cable
Laying of one number PVC insilated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation sand cushioning, portective covering adnd refilling the trench etc. as required. Upto 35 sq.mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 16 sq. Mm (28mm)
SITC of following rating recess/surface mounted LED round/square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie sahll bee confirm to IS:10322 part-5/section-2 or IEC : 62722 with all necessary accessorieds as required. Make-Havells/Philips/ Crompton/Wipro. 18/20 W LED round down light (surface)
Bulk head fitting with 9/10Watt LED.
SITC of following rating surface mounted LED Tupe Lighting fitting suitable for 230V 50 Hz, Singh Phase supply etc. complete as required. 10/12 W LED Tube Light
20/22 W LED Tube Light
SITC of 300 mm (12") Exhaust Fan (Metal body) suitable for single phase 230 volts, 50 Hz. AC supply complete with motor louvers/shutters etc. complete as required. Mak:- Usha/Crompton/Havels.
Supply, installation, testing and commissioning of following size fan 3 Blader confirming to IS:374:2019 including wiring the down rods of stranded for 230 Volts 50 Hz. Single phase supply etc. Complete as required. 1200 mm (48") BLDC 5 Star rating 32W Ceiling Fan.
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50m including all litfs, levelling, ramming the foundation trenches, removing roots lf trees shurbs all complete as per approved design building specification and direction of E/I.
Earth work in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance upto 50m including all litfs, levelling, ramming the foundation trenches, removing roots lf trees shurbs all complete as per approved design building specification and direction of E/I.
Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finshing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting propping etc. and removal of form for suspended floors, roofs, landing, balconies and access platform.
Providing T.M.T. Reinforcement of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. 10 mm dia
12 mm dia
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
Providing 12 mm Thk. cement plaster(1:3) with punning with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I
Providing 1.5 mm cement punning including curing carriage of water with all leads and litfs as per building specification and direction of E/I
Bricks - (Lead- 2k+43p =45Km)
Sand- (Lead- 02k + 10 P =12Km )
Stone Chips (Lead- 02k+23 P =25 Km)
Cement- ( Lead-05 Km)
Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up toSite. (a) From 0.00 M to 50.00 M below G.L.
(b) From 51.0 M to125.00 M
(c) From126.0 M to150.00 M
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia.
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineerin-charge
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP
Supply fitting and fixing of standared make starter pannel Board with arrangement of all necsssury protection including all taxes, all complete job as per direction of E/I.
Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.
Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50m including all litfs, levelling, ramming the foundation trenches, removing roots lf trees shurbs all complete as per approved design building specification and direction of E/I.
Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
Centering and shuttering including struting, propping etc and removal of form for foundation, footings, bases for columns, etc. For mass concrete
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including struting, propping etc and removal of form for
Providing Tor Steel reinforcement of 8mm dia rods as as per approved design & drawing -do- -do- TMT Fe 500 (Only valid for SAIL & TATA Steel 20%
Providing 12 mm Thk. cement plaster(1:3) with punning with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I
Providing 1.5 mm cement punning including curing carriage of water with all leads and litfs as per building specification and direction of E/I
Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. 150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion, (i) Singls socketed pipes. 110 mm diameter
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge
Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates) Drilling upto 30 mtr. Depth below G.L. in Rural Area
Bricks - (Lead- 2k+43p =45Km)
Sand- (Lead- 02k + 10 P =12Km )
Stone Chips (Lead- 02k+23 P =25 Km)
Stone Metal (Lead- 02k+23 P =25 Km)
EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in all kinds of Ordinary Soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
Providing coarse clean lical sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with leads and 1.5 in
Providing designation 100A B/W with Fly Ash Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints cost of screening, raking out joints to 15mm depth, curing, taxes sand royalty all complete as per building specification and direction of E/I.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finshing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (Zone-III): 3 graded stone aggregate 20mm nominal size)
Centering and shuttering including struting, propping etc and removal of form for foundation, footings, bases for columns, etc. For mass concrete
Lintels, beams, Plinth Beams, girders, Bressumers and cantilevers
Reinforced cement concrete owrk in beams, suspended floors, roofs having slope up to 150 landing, balconies, shelves, chajjars, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five level, excluding the cost of centeri, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III): 3 graded stone aggreagte 20 mm nominal)
Reinforce cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc. Above plinth level up to floor five leve, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) :3 graded stone aggregate 20mm nimonal size)
Centering and shuttering including struting, propping etc and removal of form for
Providing Tor Steel reinforcement of 8mm dia rods as as per approved design & drawing -do- -do- TMT Fe 500 (Only valid for SAIL & TATA Steel 20%
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building spedification and diection of E/I.
Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.
Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.
Steel work welded in built up sections/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
Bricks - (Lead- 2k+43p =45Km)
Fly Ash Brick (Lead- 2k+43p =45Km)
Sand- (Lead- 02k + 10 P =12Km )
Stone Chips (Lead- 02k+23 P =25 Km)
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50m including all litfs, levelling, ramming the foundation trenches, removing roots lf trees shurbs all complete as per approved design building specification and direction of E/I.
Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including struting, propping etc and removal of form for..do...E/I
Bricks - (Lead- 2k+43p =45Km)
Sand- (Lead- 02k + 10 P =12Km )
Stone Chips (Lead- 02k+23 P =25 Km)
Cement- ( Lead-05 Km)
ADD GST @18%
ADD LABOUR CESS @1%
shree ganesh construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .