Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹47.7 L+₹1.9 L (4.17%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L2 | Rejected-Finance Rejected due to bidder is not L1 | |
| 3 | L3₹49.0 L+₹3.2 L (6.98%)Rejected-Finance | L3 | Rejected-Finance Rejected due to bidder is not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
REPAIRS TO MD ACCN OF AE LINE YADUNATH AND JS LINE AT GE (A) AHMEDABAD CANTT
2022_MES_520908_1
8246/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Army) Ahmedabad
₹90,000
Yes
30 Jun 2022
29 Apr 2022
23 May 2022
29 Apr 2022
20 May 2022
6 May 2022
29 Apr 2022 - 6 May 2022
60 days
Amount
Taking up or down steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site complete all as specified and directed.
15mm bore of pipe
20mm bore of pipe
25mm bore of pipe
Fixing only medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, I connections , caps, plugs and unions etc and fixed complete with clips wall hooks, wooden plug etc fixed to walls acr in floors, ceiling and making good as specified and directed (Dismanting or tiles etc making good the same shall be done by DEL/other agency on walls in floors) Note: GI pipes will be issued under Sch'B' complete all as specified and directed.
15mm bore of pipe
20mm bore of pipe
25mm bore of pipe
All as per item No 2 above but refixing old steel tubing and connections in new or old position (Walls, ceiling, floor etc) -do- complete all as specified and directed.
15mm bore of pipe
20mm bore of pipe
25mm bore of pipe
Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
S&F 2nd hard wood factory made 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165)
S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.
M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.
S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed & directed
S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed
S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and averae width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M & L for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregrate in lintles up to 1.50m clear span, cills, steps, seismic and other bands, plinth courses, string courses,lacing courses, parapets and railings upto 60cm in height, copings,kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering, slightly rounded or chamfered angles and throating as directed including form work complete all as specified.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, Exc 1.5 Sqm complete all as specified and directed.
Taking down steel windows and ventilators with frame (without taking off shutters) complete area not exc 1.5 sqm and removing from site of work all as directed by Engineer-in-Charge complete all as specified and directed.
S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed.
S & F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.
S & F Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm) complete all as specified and directed.
S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed.
S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.
Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified.
Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 6-7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in matching pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality all as specified & directed
Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for chajja complete all as specified and directed. (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A complete all as specified and directed.
Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.
S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete all as specified and directed.
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed complete all as specified and directed.
Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.
M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge complete all as specified and directed.
M&L PCC 1:2:4 type B0using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed
Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and fair complete all as specified and directed.
M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and directed.
Supply only Integral waterproofing compound.
M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete all as specified
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer all as specifed.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls all as specified and directed by the Engr-in-Charge complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.
M&L for 25mm thick Cement concrete type B-0), 1:2:4 (12.5mm graded aggregate) including necessary form work as in flooring, surface finished rough complete all as specified.
M&L for 100mm thick PCC(1:4:8) type D2 using 40mm graded stone agg as in sub base finished even and rough complete all as specified and directed.
M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 10 m height) complete all as specified and directed.
S& F mild steel welded fabric of weight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified.
M&L for 15mm thick rendering on vertical side of sunken floor of brick/ concrete surfaces in CM (1:3) mixed with water proofing compound as per manufacture instrution and finished even and smooth without using extra cement complete all as specified. (Note : WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for PCC 1:1½:3 nominal mix type A-0 using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacture instruction on bottom of sunken portion with slope towards spout including applying two coat of polymeric base chemical in the top surface of PCC and side of sunken portion complete all as specified. (Note : WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in lean concrete in sunken floors complete all as specified and directed.
S&F 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed.
M&L filling surface cracks not exc 5 to 7 mm wide with “Dr fixit cracks X power or equivalent polymer modified cracks filler all as per manufacturer instructions and as directed.
S&F in repairs 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete all as specified and directed.
S&F PVC connection 600mm long of dia 15mm complete all as specified and directed.
S&F in repairs shower rose 125 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.
S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.
15mm dia stop valves, fancy type chromium plated with long shank and cup (conncelaed type) cast copper aolly screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed.
S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.
S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed.
S&F vitreous china ware wash basin, white flat back size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets fixed in repairs complete all as specified and directed.
Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers, waste coupling and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.
S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed.
S/F grating doom 150 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.
S&F 32mm dia PVC waste pipe fixed in repairs. Including Cup bracket complete all as specified and directed.
Dismanting of PVC water tanks or any description and at any position and removing to store/ removing from site complete all as specified and directed.
(b) Exc 250 ltrs and n.exc 500 ltrs capacity complete all as specified and directed.
(b) Exc 500 ltrs and n.exc 1000 ltrs capacity complete all as specified and directed.
S&F in repairs Rotational moulded polyethylene water storage tanks 500 Liters (cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part I Make : Sintex/ Polywell/ Polytuff complete all as specified and directed.
Ditto all as per item No 76 but 1000 Litres capacity Make : Sintex/ Polywell/ Polytuff complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including removing and refixing or air pipe etc and cleaning and removing all acale and dirt etc from tanks and moulds of cerculating pipe etc and dispose the all scale dirt, sludge etc where directed and clean the surrounding area of the tank neat and clean of capacity exc 250 ltr and not exc 500 ltr complete all as specigied and directed by Engineer-in-charge complete all as specified and directed.
-Ditto- all as per item No 78 above but capacity exc 500 litr and not exc 1000 ltr complete all as specified and directed.
S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including , fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank) including provn of lime concrete bedding fixed in repairs complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
M&L SGSW Gully trap squre or round mounted type 'P' 150mm x100mm complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketd, in any length with rubber ring joints laid in floor or fixied on wall all asspecifed and directed.
S&F 75 mm bore PVC (SWR) pipessoil waste and rain water drainage pipe (6 kgf/sqcm) single socketd, in any length with rubber ring joints laid in floor or fixied on wall all asspecifed and directed.
S&F PVC (SWR) 75 mm dia bend any redius with oval access door complete all as specified and directed.
S&F PVC (SWR) 110mm 75 mm dia reducers complete all as specified and directed.
S&F PVC (SWR) vent cowl size 110 mm dia complete all as specified and directed.
S&F PVC (SWR) 110 mm dia bends any radius with oval access door complete all as specified and directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy all as specified and directed by the Engineer-in Charge complete all as specified and directed.
Ditto all as per item No 90 above but one coat of white wash on ceilings complete all as specified and directed.
Ditto all as per item No 90 above but one coat of colours wash on walls complete all as specified and directed.
Ditto all as per item No 90 above but one coat of distemper oil emulsion on walls complete all as specified and directed.
All as per item No 90 above but two coat of oil bound emulsion distemper on walls complete all as specified and directed
M&L for preparation of old painted wooden surface of any description in any position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge complete all as specified and directed.
Ditto all as per item No 95 above but applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.
S&F for 25 mm harrison rail/curtain rails Stainless steel with fixing brackets stops fixed in repairs complete all as specified and directed.
Repair of steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as specified and directed.
Resecuring or easing and adjusting shutters of any description exc 1 Sqm and not exc 2 Sqm each without taking down of sutters complete all as specified and directed.
S & F steel with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete as sepcified and directed
DMA PROJECTS
Ramdev and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .