Supply and Installation Testing and Commissioning of 200kVA DG Set and Allied Electrical Works at Instrumentation Department

Amount

200KVA DG SET

od291465/2021_2022 : Supply Installation, Testing and commissioning of 200 KVA 160 KW A.C. 3 Phase 415 V, 1500 RPM 0.8 power factor, 50 Hz, Silent Diesel Captive Generation Unit comprising of Engine coupled directly to Alternator mounted on a rigid bed plate with suitable Acoustic Enclosure and complete with standard control panel, battery leads and fuel tank etc

od291795/2021_2022 : Supplying, fixing, testing and commissioning of exhaust pipes of following sizes of MS 'C' class along with necessary clamps, fittings such as bends, tees etc and 50x50x3 mm angle support for the pipe.<br>DG Set Exahust piping of nominal size - 125 mm dia, 3 mm thickness

CABLING AND TERMINATION

90.12.1.35 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 240 sq mm

90.12.7.35 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm

90.12.1.34 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core185 sq mm

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.7.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm

od291870/2021_2022 : Supply and Laying of one number additional PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)<br>2 core 2.5 sq mm

od291871/2021_2022 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.<br>2 core 2.5 sq mm with factory made clamp

od291872/2021_2022 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.<br>6 core 2.5 sq mm with factory made clamp

od291873/2021_2022 : Supply and Laying of one number additional PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)<br>6 core 2.5 sq mm

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

90.12.24.1 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.2.5 Sq mm

od294418/2021_2022 : Termination Clamping of 3.5 x 185 sq mm PVC cable on the OH Line with winding<br>aluminium strands.

od294764/2021_2022 : Providing re-end termination with brass compression gland and aluminium lugs for existing <br> PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV <br>grade as required.

AMF PANEL

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board A' section neoprene beeding suitable for 1.60/2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.7 : Supply and providing copper earth bus in the panel board

od292792/2021_2022 : Supplying and Fixing 400 A, TPN, aluminium busbars (50 x 10 mm) in the existing panel board.

od294540/2021_2022 : Supplying and Fixing 200 A, TPN, aluminium busbars (25 x 10 mm) in the existing panel board.

od292996/2021_2022 : Providing and fixing following capacity TP&amp;N disconnector switch inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.&lt;br&gt;320 Amp TP&amp;N

2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 Amp, 16 KA, TPMCCB

2.2.2 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required125 Amp,16 KA,TPMCCB

2.2.3 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required160 Amp, 16KA,TPMCCB

2.2.5 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required200 Amp, 25 KA,TPMCCB

90.14.11.13 : MCCB Accessories Supply and fixing rotary handle, External type (including BUC handle with door interlock) in the existing MCCB of rating up to 250A

90.14.10.1 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 16A-100A, 16 kA (Ics=100% Icu), 3 pole, current limiting type MCCB having thermal setting range of 80-100% with thermal magnetic release having adjustable OL

2.2.15 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required200 Amp, 36 KA

od294783/2021_2022 : Supply and Fixing Spreader/Terminal adapter Kit Extended terminal for 3 pole MCCB of rating upto 160 A (6 pcs)

MISCELLANEOUS ITEMS

od293171/2021_2022 : Supply and Providing 2mm thick synthetic PVC fire retardent insulating mat with 3.3KV dielectric strength conforming to relevant ISS

od293176/2021_2022 : Painting letters or figures with enamel paint as identification marks to SB, DB,panel boards etc as required

od293177/2021_2022 : Supply and Providing fire bucket (9ltr capacity) painted with post office red colour with primer coat of red oxide and written with white paint &apos;FIRE&apos; and filled with sand and mounted in standing bracket in wall

od293178/2021_2022 : Supplying and Fixing ABC Type Fire Extinguisher 4 kg.

od293181/2021_2022 : Electrical Inspectorate fees (Amount will be paid against original reciepts)

od293182/2021_2022 : Expenses for preparation and submission of necessary documents, forms, scheme, drawings and certificates etc for getting approval and energization order from EI for DG set. First computer copy A3 sheet and additional copy A3 sheet

od293183/2021_2022 : Dismantling of existing sub panels, cables, termination etc and convey the dismantled items to store.

Delstar a Grade Electrical contractors

VIRTUS TECHNO

Bidder Name

Kittu Electricals private limited

Delstar a Grade Electrical contractors

VIRTUS TECHNO