Repair or modification and up-gradation of Civil, MEP etc Works of 03 Amrapali projects i.e Princely Estate, Zodiac and Platinum and Titanium at Noida

Grand Total Cost (A + B+C) ₹ 65,48,76,769

depth, consolidating Each deposited layer by ramming and

watering, lead up to 50 m and for all lift

Excavating, supplying and filling of local earth (including royalty)

by mechanical transport upto a lead of 5km also including

ramming and watering of the earth in layers not exceeding 20 cm

in trenches, plinth, sides of foundation etc. complete for all lift

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth,

3 2.6 1.5 m in width as well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m and lift upto 1.5

m, as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified

4 4.1 grade excluding the cost of centering and shuttering - All work up

to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

5 4.1.3 sources : 4 graded stone aggregate 20 mm nominal size derived Cum 7878.5 245.00 1930232.5 725 5711912.5 745 5869482.5 1715.00 1,35,11,627.50

from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural

5.1 4.1.8 sources : 8 graded stone aggregate 40 mm nominal size derived Cum 6812 84.00 572208 216 1471392 27 183924 327.00 22,27,524.00

from natural sources)

Providing and laying in position ready mixed or site batched

design mix cement concrete for plain cement concrete work;

using coarse ggregate and fine aggregate derived from natural

sources, Portland Pozzolana/Ordinary Portland /Portland Slag

cement, admixtures in recommended proportions as per IS:9103

to accelerate / retard setting of concrete, to improve durability

and workability without impairing strength; including pumping of

concrete to site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering and finishing as per

direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the minimum

specified cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

7.1 4.20.1 All works upto plinth level :

Concrete of M25 grade with minimum cement content of 300 kg

Reinforced cement concrete work in walls (any thickness),

including attached pilasters, buttresses, plinth and string courses,

fillets, columns, pillars, piers, abutments, posts and struts etc.

above plinth level up to floor five level, excluding cost of

centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu

8.1 5.2.2 ral sources : 3 graded stone aggregate 20 mm nominal size Cum 10852.95 0.00 0 0 0 10 108529.5 10.00 1,08,529.50

derived from natural sources)

Steel reinforcement for R.C.C. work including straightening,

9 5.22A cutting, bending, placing in position and binding all complete

above plinth level.

Add for plaster drip course/ groove in plastered surface or

moulding to R.C.C. projections.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions

as per IS: 9103 to accelerate / retard setting of concrete, to

improve durability and workability without impairing strength;

including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering,

11 5.33 finishing and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 1.10 times of the

specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra

11.1 5.33.1 All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg

Concrete of M30 grade with minimum cement content of 350 kg

11.2 5.33.2 All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg

Concrete of M30 grade with minimum cement content of 350 kg

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for

each four floors or part thereof.

Centering and shuttering including strutting, propping etc. and

14 5.9 removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses,

plinth and string courses etc.

14.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm. 927.25 5.00 4636.25 50 46362.5 5549 5145310.25 5604.00 51,96,309.00

Lintels, beams, plinth beams, girders, bressumers and

14.5 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm. 961.30 45.00 43258.5 50 48065 81 77865.3 176.00 1,69,188.80

Brick work with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in foundation and plinth in:

Half brick masonry with common burnt clay F.P.S. (non modular)

16 6.13 bricks of class designation 7.5 in superstructure above plinth

level up to floor V level.

Brick work with common burnt clay F.P.S. (non modular) bricks

17 6.4 of class designation 7.5 in superstructure above plinth level up to

floor V level in all shapes and sizes in :

Extra for brick work / AAC block masonry / Tile brick masonry in

18 6.5 superstructure above floor V level, for each four floors or part Cum 169.45 3.00 508.35 3 508.35 3 508.35 9.00 1,525.05

thereof by mechanical means.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

19 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over Sqm 1267.95 1225.00 1553238.75 740 938283 522 661869.9 2487.00 31,53,391.65

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting, hoisting,

fixing in position and applying a priming coat of approved steel

primer all complete.

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

21 11.23 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Kota stone slab flooring over 20 mm (average) thick base laid

over and jointed with grey cement slurry mixed with pigment to

22 11.26 match the shade of the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1 cement : 4 coarse

Kota stone slabs 20 mm thick in risers of steps, skirting, dado

and pillars laid on 12 mm (average) thick cement mortar 1:3 (1

23 11.27 cement: 3 coarse sand) and jointed with grey cement slurry sqm 2354.7 190.00 447393 240 565128 220 518034 650.00 15,30,555.00

mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete.

40 mm thick fine dressed stone flooring over 20 mm (average)

thick base of cement mortar 1:5 (1 cement : 5 coarse sand),

including pointing with cement mortar 1:2 (1 cement : 2 stone

dust) with an admixture of pigment to match the shade of stone.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement

25 11.56 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

Polished Granite stone slab of all colour and texture except

26 11.24 Extra for pre finished nosing to treads of steps of marble stone. metre 719.9 1200.00 863880 1465 1054653.5 1244 895555.6 3909.00 28,14,089.10

Extra for marble stone flooring in treads of steps and risers using

single length up to 2.00 metre. sq

Extra for pre finished nosing in treads of steps of Kota stone/

Extra for Kota stone/ sand stone in treads of steps and risers

using single length up to 1.05 metre.

Providing and laying Ceramic glazed floor tiles of size 300x300

mm (thickness to be specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in colours such as

cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with

grey cement slurry @ 3.3 kg/sqm including pointing the joints

with white cement and matching pigment etc., complete.

Providing and laying brick tiles over mumty roofs, grouted with

cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of

31 12.19 integral water proofing compound by weight of cement, over 12

mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and

With common burnt clay F.P.S. (non modular) brick tiles of class

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge),

including finishing with cement mortar 1:3 (1 cement : 3 fine

sand) as per standard design :

Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

cement : 3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

34 13.1 12 mm cement plaster of mix :

18 mm cement plaster in two coats under layer 12 mm thick

35 13.11 cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top Sqm 518.55 60.00 31113 120 62226 198 102672.9 378.00 1,96,011.90

layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

37 13.220 Extra for plastering exterior walls of height more than 10 m from Sqm 87.1 32115.00 2797216.5 48240 4201704 64660 5631886 145015.00 1,26,30,806.50

ground level for every additional height of 3 m or part thereof.

Distempering with 1st quality acrylic distemper (ready mixed)

having VOC content less than 50 gms/litre, of approved

manufacturer, of required shade and colour complete, to achieve

even shade and color

New work (Two or more coats) over and including water

38.1 13.41.1 thinnable priming coat with cement primer having VOC content Sqm 185.65 48720.00 9044868 2400 445560 1600 297040 52720.00 97,87,468.00

less than 50 gms/litre

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

Finishing walls with Acrylic Smooth exterior paint of required

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

@ .90litre/10 sqm)

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable

shade with ordinary paint of approved brand and manufacture

Finishing walls with Acrylic Smooth exterior paint of required

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on

existing cement paint surface

Finishing with Epoxy paint (two or more coats) at all locations

prepared and applied as per manufacturer's specifications

including appropriate priming coat, preparation of surface, etc.

Removing white or colour wash by scrapping and sand papering

44 13.88 and preparing the surface smooth including necessary repairs to Sqm 19.75 66635.00 1316041.25 104780 2069405 137882 2723169.5 309297.00 61,08,615.75

scratches etc. complete

Providing and laying in situ seven course water proofing

treatment with APP (Atactic Polypropylene) modified Polymeric

memberane over roof consisting of first coat of bitumen primer

@ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material

@ 1.20 kg/sqm, which shall consist of blown type bitumen of

grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing

membrane APP modified Polymeric membrane 2.0 mm thick of

3.00 Kg/sqm weight consisting of five layers prefabricated with

45 14.88 centre core as 100 micron HMHDPE film sandwiched on both Sqm 855.7 6350.00 5433695 5800 4963060 6450 5519265 18600.00 1,59,16,020.00

sides with polymeric mix and the polymeric mix is protected on

both side with 20 micron HMHDPE film. 7th, the top most layer

shall be finished with brick tiles of class designation 10 grouted

with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2%

integral water proofing compound by weight of cement over a 12

mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and

finished neat (item of laying brick tiles shall be paid for

Extra for covering top of membrane with Geotextile, 120 gsm

non woven, 100% polyester of thickness 1 to 1.25 mm bonded to

the membrane with intermittent touch by heating the membrane

by Butane Torch as per manufactures recommendation.

Dismantling old plaster or skirting raking out joints and cleaning

47 15.56 the surface for plaster including disposal of rubbish to the Sqm 54.65 22100.00 1207765 31500 1721475 45650 2494772.5 99250.00 54,24,012.50

dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means, including

48 15.60 loading, transporting, unloading to approved municipal dumping Cum 263.95 820.00 216439 4300 1134985 3474 916962.3 8594.00 22,68,386.30

ground or as approved by Engineer-in-charge, beyond 50 m

initial lead, for all leads including all lifts involved.

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means

51 15.2 including disposal of material within 50 metres lead as per

direction of Engineer - in - charge.

51.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 2434.25 275.00 669418.75 1380 3359265 1344 3271632 2999.00 73,00,315.75

Demolishing R.C.C. work by mechanical means and stockpiling

at designated locations and disposal of dismantled materials up

to a lead of 1 kilometre, stacking serviceable and unserviceable

material separately including cutting reinforcement bars.

Dismantling dressed stone work ashlar face stone work, marble

work or precast concrete work manually/ by mechanical means

53 15.10 including stacking of serviceable and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

Providing and filling in position rubberized bitumen hot sealing

54 16.46 compound for sealing of expansion joints in roads / pavements

all complete as per direction of the Engineer-in-Charge.

54.1 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. cm width 8.65 500.00 4325 3400 29410 2999 25941.35 6899.00 59,676.35

Providing, laying and making kerb channel 30 cm wide and 50

mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6

graded stone aggregate 20 mm nominal size) over 75mm bed of

55 16.63 dry brick ballast 40 mm nominal size, well rammed and Sqm 558.3 60.00 33498 360 200988 552 308181.6 972.00 5,42,667.60

consolidated and grouted with fine sand, including finishing the

top smooth etc. complete and as per direction of Engineer-in-

Providing and laying 75 mm thick compacted bed of dry brick

aggregate of 40 mm thick nominal size including spreading, well

56 16.64 ramming, consolidating and grouting with jamuna sand, including Sqm 199.35 35.00 6977.25 750 149512.5 600 119610 1385.00 2,76,099.75

finishing smooth etc. complete as per direction of Engineer in-

Providing and laying at or near ground level factory made kerb

stone of M-25 grade cement concrete in position to the required

line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse sand), including making joints with or without

grooves (thickness of joints except at sharp curve shall not to

more than 5mm), including making drainage opening wherever

required complete etc. as per direction of Engineer-in-charge

(length of finished kerb edging shall be measured for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-

Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed concrete

shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming with

wire brush etc. complete as per specifications and directions of

Engineer-in harge. (The panel shuttering work shall be paid for

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/

recoverable separately).

Taking out existing kerb stones of all types from footpath/ central

verge, including removal of mortar etc., disposal of

unserviceable material to the dumping ground, for which

payment shall be made separately and stacking of serviceable

material within 50 metre lead as per direction of Engineer-in-

Laying old cement cocrete interlocking paver blocks of any

design/shape laid in required line, level, curvature, colour and

pattern over and including 50 mm thick compacted bed of coarse

sand, filling the joints with fine sand etc. all complete as per the

direction of Engineer in-charge. (Old CC paver blocks shall be

supplied by the department free of cost).

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Taking out existing CC interlocking paver blocks from footpath/

central verge, including removal of rubbish etc., disposal of

unserviceable material to the dumping ground, for which

payment shall be made separately and stacking of serviceable

material within 50 metre lead as per direction of Engineer-in-

Laying at or near ground level old kerb stones of all types in

position to the required line, level and curvature, jointed with

cement mortar 1:3 (1 cement : 3 coarse sand), including making

joints with or without grooves (thickness of joints, except at sharp

62 16.85 curve, shall not be more than 5 mm), including making drainage metre 109.45 150.00 16417.5 1850 202482.5 1512 165488.4 3512.00 3,84,388.40

opening wherever required etc. complete as per direction of

Engineer-in-charge. (Length of finished kerb edging shall be

measured for payment). (Old kerb stones shall be supplied by the

department free of cost)

Providing and applying integral crystalline slurry of hydrophilic in

nature for waterproofing treatment to the RCC structures like

retaining walls of the basement, water tanks, roof slabs, podiums,

reservior, sewage & water treatment plant, tunnels / subway and

bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts

integral crystalline slurry : 2 parts water) for vertical surfaces and

3 : 1 (3 parts integral crystalline slurry : 1 part water) for

horizontal surfaces and applying the same from negative

(internal) side with the help of synthetic fiber brush. The material

shall meet the requirements as specified in ACI- 212-3R-2010 i.e

by reducing permeability of concrete by more than 90%

compared with control concrete as per DIN 1048 and resistant to

16 bar hydrostatic pressure on negative side. The crystalline

slurry shall be capable of self-healing of cracks up to a width of

0.50mm. The work shall be carried out all complete as per

specification and the direction of the engineer-in-charge. The

product performance shall carry guarantee for 10 years against

Providing and laying integral cement based treatment for water

proofing on the vertical surface by fixing specified stone slab 22

mm to 25 mm thick with cement slurry mixed with water proofing

compound conforming to IS:2645 in recommended proportions

with a gap of 20 mm (minimum) between stone slabs and the

64 22.2 receiving surfaces and filling the gaps with neat cement slurry

mixed with water proofing compound and finishing the exterior of

stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20

mm thick with neat cement punning mixed with water proofing

compound in recommended proportion complete at all levels and

as directed by Engineer-in-charge :

Providing and injecting approved grout in proportion

recommended by the manufacturer into cracks/honey-comb area

of concrete/ masonry by suitable gun/pump at required pressure

including cutting of nipples after curing etc. complete as per

directions of Engineer-in Charge. (The payment shall be made

on the basis of actual weight of approved grout injected.)

Stirrer mixed SBR Polymer (of approved make) modified

65.1 26.35.2 Cement slurry made with Shrinkage Compensating Cement in Kg 124 750.00 93000 500 62000 500 62000 1750.00 2,17,000.00

concrete/RCC work.

Providing and inserting 12mm dia galvanised steel injection

nipple in honey comb area and along crack line including drilling

of holes of required diametre (20mm to 30mm) up to depth from

30mm to 80mm at required spacing and making the hole & crack

66 26.39 dust free by blowing compressed air, sealing the distance Each 236.9 1500.00 355350 1000 236900 1000 236900 3500.00 8,29,150.00

between injection nipple with adhesive chemical of approved

make and allow it to cure complete as per direction of Engineer-

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing, mixing and applying SBR polymer (of approved make)

modified Cement mortar in proportion of 1:4 (1 cement: 4 graded

coarse sand with polymer minimum 2% by wt. of cement used)

as per specifications and directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of

thickness shall be done just after the surface preparation is

67 26.32 completed and Payment under this item shall be made only after

proper wet curing has been done and surface has been

satisfactorily evaluated by sounding / tapping with a blunt metal

instrument and/or the 75mm size cube crushing strength at the

end of 28 days to be not less than 30 N/Sqmm2).

Providing, mixing and applying bonding coat of approved

68 26.31 adhesive on chipped portion of RCC as per specifications and

direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious

specified proportion of approved polymer

Providing and fixing factory made precast RCC perforated drain

covers, having concrete of strength not less than M-25, of size

1000 x 450x50 mm, reinforced with 8 mm dia four nos

longitudinal & 9 nos cross sectional T.M.T. hoop bars, including

including providing edge binding with M.S. flats of size 50 mm x

1.6 mm complete, all as per direction of Engineer in-charge.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

NON -SCHEDULE ITEMS

Princely Estate Zodiac Platinum

SI No. DSR Item Item Description Unit Updated Rate Cumulative Quantity Cumulative Updated Amount

Quantity Latest Amount Quantity Latest Amount Quantity Latest Amount

Supply and Installation of FSB-235 ABS / RUBBER SPEED

BUMPS Made from a unique co polymer blend of high impact

and tear resistant polymer made in revolutionary Hexacore

75 NS 1 design with High visibility, reflective tapes in Red & Yellow to mtrs 1523.00 96 146208 100 152300 80 121840 276.00 4,20,348.00

warn during night. Having dimensions Length = 250 mm, Width =

350 mm & Height 50 mm. All complete as specified and as

directed by the Engineer-in-Charge :

Providing and fixing of chicken mesh with cement mortar and

76 NS 2 screws/nail in plaster work between concrete bend, lintels, Sqm 174.00 3170 551580 5000 870000 7192 1251408 15362.00 26,72,988.00

column and brick work for avoid the cracks in finishing work.

Crack Repair: Makeing 'V' groove of 10 mm wide and 10 mm

deep over crack line by electrically operated angle grinder with

77 NS 3 diamond concrete saw blade and cleaning it by air blower as mtrs 107.00 2000 214000 0 0 0 0 2000.00 2,14,000.00

directed by Engineer-in-charge..

Crack filling: Supply and apply solvent free, moisture insensitive

epoxy resin based patch repair putty on horizontal surfaces.

78 NS 4 Product requirements: suitable for submerged condition; mtrs 207.00 2000 414000 0 0 0 0 2000.00 4,14,000.00

compressive strength of 40 N/mm2 (1 day) according to IS 9162-

Rebar For Main Reinforcement: Supply and fixing of main

reinforcement using rebars of designated dia for

column/beam/Shear walls/Foundations at designed embedment

length wherever required , including power drilling, cleaning of

holes, then rebars should be inserted in holes that should be

filled with FIS EM Plus of Fischer or equivalent, a heavy duty

pure epoxy based rebarring chemical with ETA approval, DIBt,

approved for diameter range from 8 mm to 40 mm reinforcement

bar as per manufacturer's specification as per the direction of

Engg In-charge. Drilling of hole should be done upto provided

embedment depth as per the design from manufacturer approved

by EnC, followed by cleaning with blow pump, wire brush and

blow pump for 4 times, complete as per the manufacturer's

methodology. The chemical shall be approved for diamond-

drilled and water-filled drill holes as well as seismic applications

in performance categories C1, C2 for rebar connections. Product

shall have test certificate for 120years of service life & shall

have ETA complying to EAD 332402-00-0601-v01. Cost of

providing, cutting, bending of rebar shall be paid separately as

per approved item.

For Shear Connector/Ties/Stirrups: Supply and fixing of shear

connectors/ties/stirrups using rebars of designated dia for

column/beam/Shear walls etc at designed embedment length

wherever required , including power drilling, cleaning of holes,

then rebars should be inserted in holes that should be filled with

FIS V Plus of Fischer or equivalent, a hybrid rebarring chemical

with ETA approval, DIBt, approved for diameter range from 8

mm to 28mm reinforcement bar as per manufacturer's

80 NS 5.2 specification as per the direction of Engg In-charge. Drilling of

hole should be done upto provided embedment depth as per the

design from manufacturer approved by EnC, followed by

cleaning with blow pump, wire brush and blow pump for 4 times,

complete as per the manufacturer's methodology. The chemical

shall have tested service life of 50years as per ETA. Cost of

providing, cutting, bending of rebar shall be paid separately as

per approved item.

Providing and laying of Stone aggregate 40 mm nominal size

and above and spreading the same in 100mm thick over the

RCC slab in landscape area or as directed by Engineer-in-

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing and fixing swimming pool tile (porcelain tiles) on

finished plain wall surface of size 72mm x 72 mm x 5 mm in all

colour, design , fixing in customize design as per direction of

Engineer-in- Charge. The swimming pool tiles to be fixed on the

with the help of approved adhesive applied at the rate of 2.5 kg

per sqm and grouting of the same. The rate is inclusive of all

operation, material and required pattern approved by Engineer-in

Providing & Supplying of 8 mm thick Multicell polycarbonate

panel system having min 45-50 microns Co-extruded UV

protected on top Layer (exposed to Sun) over structural steel/MS

purlin as per approved colour/shade. Panels shall have width of

83 NS8 900 mm to ensure best performance for wind uplift, vibration, oil sqm 2,907.00 1120 3255840 1080 3139560 288 837216 2488.00 72,32,616.00

canning and visual appearance. Polycarbonate Panel System

with minimum 3 cells and 4 walls structure shall be uniform in

colour with an integral Tight-Cell structure, with all fixing

accessories to ensure best perfomance for wind uplift, vibrations,

Providind and fixing of aluminium glazing bar with EPDM

84 NS9 Rubbber gasket,screws and silicon completed in all respect with metre 1,315.00 296 389240 318 418170 104 136760 718.00 9,44,170.00

all fixtures and acessories.

Providing and fixing 9 Layer Acrylic Synthetic system –

comprising of 1 layer of Primer, 3 Layers of Sealer coats, 3

layers of Rubberised Cushion coats, 1 layer of exclusive Anti-

skid treatment and 1 layer of UV Top Coat – in customized

preferred shades as per drawing – complete with standard line

markings. Lastly, application of Gloss Coat in the end which

gives extra sheen to the surface and makes it fairly dust

resistant. The product, classified by ITF and certified by NABL

approved lab, is an all-weather product for outdoor use.• vender

should provide Warranty of 2 years against colour fading and

bubbles. All complete as specified and as directed by the

Engineer-in-Charge.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

DETAILED ESTIMATE FOR PLUMBING

DESCRIPTION OF ITEMS UNIT DSR 2022 gst on 12% Princely Estate Zodiac Platinum

DSR- Cumulative Cumulative

2023/MR Quantity Amount

PLUMBING Quantity Amount Quantity Amount Quantity Amount

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

Extra for every additional lift of 1.5 m or part thereof in

excavation / banking excavated or stacked materials

1.1 2.26.1 All kinds of soil - - - -

E) RAIN WATER HARVESTING

Earthwork in excavation by mechanical means ( Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5m in width or 10 sqm on plan) including dressing of

sides and ramming of bottoms, lift up to 1.5m, including getting

out the excavated soil and disposal of surplus excavated soil as

directed, with in a lead of 50m.

External Sewage Work - - - - -

Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, anddressing of sides, ramming

of bottoms, depth up to 1.5 m, including getting out the

3 2.10 excavated soil, and then returning the soil as required, in layers - - - - -

not exceeding 20 cm in depth, including consolidatingeach

deposited layer by ramming, watering, etc. and disposing of

surplus excavated soil as directed,within a lead of 50 m :

3.1 2.10.1 All kinds of soil - - - - -

Pipes, cables etc. exceeding 80 mm dia but not exceeding 300

External Storm water drainage work - - - - -

Excavating trenches of required width for pipes, cables etc.

Including excavation for sockets, and dressing of sides, ramming

of bottoms, depth upto 1.5M including getting out the

excavated soil, and then returning the soil as required, in

layers not exceeding 20 cms in depth including

consolidating each deposited layer by ramming, watering, etc.

And disposing of surplus excavated soil as directed within a

lead of 50 m Hard/dense soil.

Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm

External Sewage Work - - - - -

Providing and laying in position cement concrete of specified

5 4.1 grade excluding the cost of centering and shuttering - All work up - - - - -

to plinth level :

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40

mm nominal size)

Providing and laying in position specified grade of reinforced

6 5.1 cement concrete, excluding the cost of centering, shuttering, - -

finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone

aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and

removal of form for

Suspended floors, roofs, landings, balconies and access

8 5.9.16 Edges of slabs and breaks in floors and walls - - - - -

Steel reinforcement for R.C.C. work including straightening,

9 5.22 cutting, bending, placing in position and binding all complete - - - - -

upto plinth level.

Brick work with common burnt clay modular bricks of class

designation 7.5 in foundation and plinth in:

Providing and fixing stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in

urinal partitions by cutting a chase of appropriate width with

11 8.10 chase cutter and embedding the stone in the chase with epoxy - - - - -

grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 6 mm nominal size) as per direction of

Engineer-in-charge and finished smooth.

11.1 8.10.2 Granite Stone of approved shade Sqm 4051.85 - 6.00 24,311.10 - 6.00 24,311.10

Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

13 12.42 conforming to IS : 13592 Type A, including jointing with seal - - - - -

ring conforming to IS : 5382, leaving 10 mm gap for thermal

14 13.4 12 mm cement plaster of mix : - - - - -

12 mm cement plaster finished with a floating coat of neat

cement of mix :

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting and

making good the walls and floors wherever required.

16.1 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 6383.25 - 6.00 38,299.50 - 6.00 38,299.50

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require :

White Vitreous China Flat back wash basin size 550x400 mm

with single 15 mm C.P. brass pillar tap

Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto

18 17.16a 1meter long with S.S. Triangular plate to european type W.C. Of Each 349.15 - 6.00 2,094.90 - 6.00 2,094.90

approved quality and make as approved by engineer in charge.

Providing and fixing CP Brass 32mm size bottle trap of

19 17.22A approved quality & make and as per the direction of engineer in Each 1034.80 - 6.00 6,208.80 - 6.00 6,208.80

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass screws

and washers complete.

Providing and fixing M.S. holder bat clamps of approved design

to sand cast iron/cast iron (spun) pipe embedded in and

including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (

1 cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size ) including cost of cutting holes and making good

Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200 mm wide with minimum distances of 37 mm from wall

face with concealed fittings arrangement of approved quality and

colour, weighing not less than 88 gms.

Providing and fixing white vitreous china battery based infrared

sensor operated urinal of approx. size 610 x 390 x 370 mm

having pre & post flushing with water (250 ml & 500 ml

consumption), having water inlet from back side, including fixing

to wall with suitable brackets all as per manufacturers

specification and direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

24 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes - - - - -

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

25 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Internal work - Exposed on wall - - - - -

Providing and fixing uplasticised PVC connection pipe with brass

Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 : 15mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS:8931 15mm

External Storm water drainage work - - - - -

Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal size)

29 19.2 all-round S.W. pipes including bed concrete as per standard - - - - -

External Sewage Work - - - - -

Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

30 19.4 C.I. cover with frame of 300x300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

30.1 19.4.1 100x100 mm size P type.

With common burnt clay F.P.S. (non modular) bricks of class

External Storm water drainage work - - - - -

Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of

joints etc. complete :

External Sewage Work - - - - -

Constructing brick masonry circular type manhole 0.91 m internal

dia at bottom and 0.56m dia at top in cement mortar 1:4 (1

cement : 4 coarse sand), inside cement plaster 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

floating coat of neat cement, foundation concrete 1:3:6 mix (1

cement : 3 coarse

sand : 6 graded stone aggregate 40 mm nominal size), and

making necessary channel in cement concrete 1:2:4 (1 cement :

sand : 4 graded stone aggregate 20 mm nominal size) finished

with a floating coat of neat cement, all complete as per standard

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

0.91m deep with SFRC cover and frame (heavy duty HD-20

grade designation) 560mm internal diameter conforming to

I.S:12592, total weight of cover and frame to be not less than

182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse

sand: 4 graded stone aggregate 20mm nominal size) including

centering, shuttering all complete.(Excavation foot rests and

12mm thick cement plaster at the external surface shall be paid

for separately)

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

External Storm water drainage work - - - - -

Constructing brick masonry circular manhole 1.22 m internal dia

at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement

:4 coarse sand) inside cement plaster 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating

coat of neat cement foundation concrete 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 40 mm nominal size)

and making necessary channel in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating

coat of neat cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD-

20 grade designation) 560 mm internal diameter conforming to

I.S. 12592, total weight of cover and frame to be not less than

182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20 mm

nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12 mm thick cement plaster at

the external surface shall be paid for separately) :

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

External Sewage Work - - - - -

Constructing brick masonry circular manhole 1.52 m internal dia

at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :

4 coarse sand) inside cement plaster 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating

coat of neat cement, foundation concrete 1:3:6 (1 cement : 3

35 19.13 coarse sand : 6

graded stone aggregate 40 mm nominal size) and making

necessary channel in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement, all complete as per

standard design :

2.30m deep with SFRC cover and frame (heavy duty HD-20

grade designation) 560mm internal diameter conforming to

I.S:12592, total weight of cover and frame to be not less than

182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse

sand: 4 graded stone aggregate 20mm nominal size) including

centering, shuttering all complete.(Excavation foot rests and

12mm thick cement plaster at the external surface shall be paid

for separately)

with common burnt clay F.P.S.(non module) brick of class

designation 7.5

External Sewage Work - - - - -

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with

stand the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification

mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)

complete as per design.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with

cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

37 19.21 stone aggregate 20 mm nominal size) cement plastered on both - - - - -

sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete :

Boring/drilling bore well of required dia for casing/ strainer pipe,

by suitable method prescribed in IS: 2800 (part I), including

collecting samples from different strata, preparing and submitting

38 23.1 strata chart/ bore log, including hire & running charges of all - - - - -

equipments, tools, plants & machineries required for the job, all

complete as per direction of Engineer-in-charge, upto 90 metre

depth below ground level.

38.1 23.1.1 All types of soil - - - - -

Supplying, assembling, lowering and fixing in vertical position in

bore well, unplasticized PVC medium well casing (CM) pipe of

39 23.3 required dia, conforming to IS: 12818, including required hire - - - - -

and labour charges, fittings & accessories etc. all complete, for

all depths, as per direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical position in

bore well unplasticized PVC medium well screen (RMS) pipes

40 23.4 with ribs, conforming to IS: 12818, including hire & labour - - - - -

charges, fittings & accessories etc. all complete, for all depths,

as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling stone boulders of size

range 5 cm to 20 cm, in recharge pit, in the required thickness,

for all leads & lifts, all complete as per direction of Engineer-in-

Supplying, filling, spreading & leveling gravels of size range 5

mm to 10 mm, in the recharge pit, over the existing layer of

boulders, in required thickness, for all leads & lifts, all complete

as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range

1.5 mm to 2 mm in recharge pit, in required thickness over gravel

layer, for all leads & lifts, all complete as per direction of

Engineer -in-charge.

Gravel packing in tubewell construction in accordance with IS:

4097, including providing gravel fine/ medium/ coarse, in

required grading & sizes as per actual requirement, all complete

as per direction of Engineer-in-charge

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing fixing testing and commissioning of MS B class pipe

including fittings and paints complete.

Providing, fixing, testing & commissioning of MSEP water

softening plant (suitable for 3 Kg/Sqcm working pressure)

complete with initial charge with T-40 NA Resin, multiport valve

with built in ejector for controlling all operations), regeneration

system and HDPE tank, pressure gauge at inlet, outlet and back

wash (each with isolation cock), valves, fittings and water

hardness testing kit & associated works. Softener shall be

suitable for the following duty:

Note:The successful contractor will have to carry out a test of

raw water from all the sources of water for the Commercial,

Residential & apartment at their own cost from a reputed lab as

approved by the Engineer-in-Charge / Consultant. On the basis

of these results the contractor has to submit his shop drawings,

design calculations and specifications accordingly.

Please note that it is ultimately the responsibility of the

contractor to provide treated water for different use as per

International Standard as given in the attached guidelines.

Raw water hardness 700 Mg/L - - - - -

Treated water hardness 50 Mg/L - - - - -

Regeneration Period 10 Hrs. - - - - -

47 MR3 Providing and fixing Coat Hook. Each 738.00 - 6.00 4,428.00 - 6 4,428

Providing ,Fixing of straight / offset type flexible single body push

fit type WC pan connector of with integral single mould sealing

48 MR4 fins made of flexible EVA body to be fixed with manufacture Each 676.00 - 6.00 4,056.00 - 6 4,056

supplied grease, including rubber bush / adaptor for use with C.I

pipe as supplied with the pan connector.

SITC of GI C class pipe for drainage pipe including fittings &

Providing and fixing soil, waste and vent pipes

Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes. 150mm dia.

Providing and fixing uPVC Floor Clean Out plug 100mm with

suitable insert keys for opening, joint with PVC socket to soil

pipe / waste pipe of uPVC pipe as required complete as per

instruction of the Engineer in charge.

Supply installation testing and commissioning of upvc SWR cowl

Drainage Sump Pumps - - - - -

Submersible pumps for basement drainage & Pump Room

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Submersible single stage single entry pumps with C.I.body and

C.I. two vane enclosed type impeller connected to TEFC

submersible motor for 415 volts, 3 phase, 50 cycles including

MCC panel with level controllers, auto control, sequential change

over facility with one proper working at low level & two proper - - - - -

working at high level with an audible alarm including all

interconnectivity cables, with both pumps connected to common

outlet header including valves, non return valves, lifting chains

etc. complete in all respect including panels.

No. of Pumps: 2 (1 Working +1 Standby)=1 set - - - - -

(Solid handiling capacity 40mm) - - - - -

Capacity- 300 lpm (Each) - - - - -

B Pump Room Drainage Pumps - - - - -

(Pumps to be suitable to handle solids upto 12 mm size) - - - - -

Capacity - 4.0 LPS (Each) - - - - -

Providing, fixing,testing and commissioning of water softening

plant. Cap. 700 LPM.

B) WATER SUPPLY - - - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

55 MR11 fixing the pipe with clamps at 1.00 m spacing. This includes - -

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Providing and fixing forged brass operated ball valve of full flow

56 MR12 of superior quality having minimum working pressure of 16 - - - - -

Providing, fixing, testing and commissioning moterise Ball valve

of following sizes, for filling of overhead tanks complete with high

& low level switchs & pressure switch to control the valve. The

level controller shalll be installed in over head tank. The level

57 MR13 switch will close the valve when water level is high & open the - - - - -

valve when level is low in the tank. The system should be

complete in all respect with accessories, 220V AC / 24 V DC, IP

67 water level control unit, Control Panel, copper control wiring

in whether proof casing etc.

Providing fixing testing and commissioning of PRV in water

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing and fixing uPVC Floor Clean Out plug 100mm with

suitable insert keys for opening, joint with PVC socket to soil

pipe / waste pipe of uPVC pipe as required complete as per

instruction of the Engineer in charge.

D) GARDEN IRRIGATION - - - - -

60 MR16 Providing & Fixing of Pro S Heavy Duty Spray Pop up having adj Each 2,200.00 14.00 30,800.00 - - 14 30,800

Providing & fixing in position 25 mm dia lawn hydrants consisting

61 MR17 of 25 mm dia Ball valve, GI nipple and threaded hose receiver Each 145.00 - 10.00 1,450.00 - 10 1,450

complete as required.

F) Swimming Pool - - - - -

Providing & Fixing of Automatic Disc filter (120 mesh)50m3 /hr

having an inlet & two outlets connections of 2", 2 pressure gauze

ports of 3/4" ,a helix made of fiber glass reinforce polyamide at

base of disc filter cartridge to create a helical effect in the

incoming water ,spinning particulate in suspension away from

the filtering element and so minimizing cleanings frequency ,3/4"

outlet for flushing at bottom of filter & maximum working pressure

Supply, Installation, Testing & commissioning of totally

anticorrosive vertical dual media filter unit of capable of

accommodating 95000 Ltr/hour Flow of multiport Valve and all

accessories Maximum working pressure 3.5 Bar.

• Non Corrosive matrial.

• Maximum operating temperature 50ºC.

• Design for 4x safety factor.

• With 5 year filter shell warranty.

Height : 2350 mm

Output flow : 95 m³/hr

FILTER MEDIA - - - - -

Supplying & placing silica sand filter media of granule size

between 0.4 and 0.8 mm

Supplying & placing underbed gravel filter media of size varying

FILTRATION PUMP/MONOBLOCK - - - - -

Supplying, Installation & commissioning of end suction

centrifugal pump Designed for commercial pools, spas, water

parks and aquariums of following features:

• Motor is suitable for most VFD's.

• Use of Burgmann commercial mechanical seal guarantees best

66 MR22 • SKF bearings are selected to provide the most durable and Nos. 250000 5 12,50,000.00 - - 5 12,50,000

efficient performance ever

• Internal three phase thermistor to protect motor.

Flow : 50000 LPH

Head : 15 MTR.

FRONTAL PIPING WITH VALVES - - - - -

Supply of Frontal Piping with valves for the above Filter with

Valve Manifold made in PVC with flanges for connecting to filters

67 MR23 as per DIN 2501 standards. Consists of set of 5 - butterfly valves Nos. 125000 3 3,75,000.00 - - 3 3,75,000

for carrying out filtration, back-washing, rinsing and shut down of

the filters. Size : 160mm

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Supplying, Installation & commissioning of end suction

centrifugal pump Designed for commercial pools, spas, water

parks and aquariums of following features:

• Motor is suitable for most VFD's.

• Use of Burgmann commercial mechanical seal guarantees best

68 MR24 • SKF bearings are selected to provide the most durable and Nos. 475720 - - 3.00 14,27,160.00 3 14,27,160

efficient performance ever

• Internal three phase thermistor to protect motor.

Flow : 130000 LPH

Head : 15 MTR.

FRONTAL PIPING WITH VALVES - - - - -

Supply of Frontal Piping with valves for the above Filter with

Valve Manifold made in PVC with flanges for connecting to filters

69 MR25 as per DIN 2501 standards. Consists of set of 5 - butterfly valves Nos. 125000 - - 2.00 2,50,000.00 2 2,50,000

for carrying out filtration, back-washing, rinsing and shut down of

the filters. Size : 160mm

SUPPORTS FOR FRONTAL PIPING - - - - -

Supply of Valve Manifold Supports for the above frontal piping

and Filter Plant.

70 MR26 Valve manifold supports made in Zinc Plated Steel. Height and Nos. 15000 - - 4.00 60,000.00 4 60,000

Size as per the Filter Plant (the supports should be of the same

manufacturer of Filter Plant )

SUPPORTS BRACKETS FOR FRONTAL PIPING - - - - -

Supply of Support Brackets at least at two positions fixed to the

71 MR27 Valve manifold.The support brackets should be of the same Nos. 30000 - - 8.00 2,40,000.00 8 2,40,000

manufacturer of filter plant

DOSING PUMP - - - - -

Supply of DOSING PUMP for disinfectant dosing Membrane

Electronic dosing pump to be mounted both on its base as well

as hung on the wall. Pumps following CE regulations. IP- 65

protection. Power connections : 220/240V, 50/60 Hz. The

materials in contact with liquid should be : Polypropylene, Viton,

Teflon and PVC. Flow rate 15-20 l/hr @ 5 bar

DOSING TANK - - - - -

SOLUTION PREPARATION TANK

Supplying & placing of Semi transparent polyethylene tank with

external scale so that levels can be checked easily, capacity of

tank should be 100 lts rested on a proper foundation . The above

doser will suck the chemicals from the tank as desired for the

pool water disinfection

AGITATOR - - - - -

Supplying & placing of Agitators-Agitators for easy installation in

the tanks, provided with steering grip in bakelite, rod and

propeller arms in PVC, length of stirring rod to be minimum 900

mm long so that the chemicals in the tank can be stirred properly

POOL LIGHTS - - - - -

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Supplying & placing of IntelliBrite 5g White LED Light 55W

IntelliBrite® 5g assure the purest and whitest illumination in your

commercial water with the IntelliBrite® 5g White LED

Light. With an equivalent light output equal to a 300, 400 and

500 watt incandescent light, the commercial IntelliBrite 5g

white LED light enhances the beauty of commercial water

features, water theme parks and municipal pools. These energy

saving LED lights provide powerful illumination while utilizing

minimal electrical consumption. Let IntelliBrite 5g white LED

commercial lighting systems from Pentair delight evening

75 MR31 swimmers.IntelliBrite 5g white LED lights use only 45-70 watts. Nos. 48000 - - 20.00 9,60,000.00 20 9,60,000

• Now in 300, 400 and 500 watt incandescent light equivalents.

• The brightest white LED pool lighting option on the market.

• LED technology provides longer life, and up to 86% less

energy than comparable incandescent lights.

• Superior lens geometry and exclusive reflector design

combine to create a wider beam and more uniform light

• Solid-state technology with no internal filament.

• Compatible with our stainless steel and plastic niches.

• Available in 120V and 12V versions.

Providing & fixing of Complete Electrical Panel with CRCA sheet

with 16 gauge with VAF meter.IP 42 , Phase indcator lamp for

76 MR32 Main Panel, Auto/Manual switch for all pumps, with push button Nos. 500000 - - 1.00 5,00,000.00 1 5,00,000

on/off MCB for recirculation pumps ( 02 nos.),Dosing pump (01

nos.),Phase preventer , Underwater light (40watt/12v-15nos)

OVERFLOW GRATING - - - - -

Supplying & placing of Overflow Grating-Grating295mm -

Manufactured in weather proof (UV

Protected) Polypropylene for long life.

77 MR33 Single spine to match the pool shape.Heavy Mtrs 1965 160 3,14,400.00 - - 160 3,14,400

duty with Non slip surface for safety.

Available in white, Blue & black colour to

best suit the deck

Providing & fixing of Complete Electrical Panel with CRCA sheet

with 16 gauge with VAF meter.IP 42 , Phase indcator lamp for

Main Panel, Auto/Manual switch for all pumps, with push button

on/off MCB for recirculation pumps ( 02 nos.),Dosing pump (01

nos.),Phase preventer , Underwater light (40watt/12v-15nos),

including cabling etc. complete.

Providing and fixing uPVC Cup-Cowl with suitable joint with PVC

79 MR35 soil pipe / waste pipe of uPVC pipe on the top as required - - - - -

complete as per instruction of the Engineer in charge.

Providing, fixing, testing and commisioning of brick masonary

80 MR36 rain water catch basins size (600mmX600mm) depth upto Nos. 6330.00 25.00 1,58,250.00 - - 25 1,58,250

750mm complete.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

DESCRIPTION OF ITEMS UNIT DSR 2022 gst on 12% Princely Estate Zodiac Platinum

DSR-2021/ Cumulative Cumulative

2022/MR Quantity Amount

FIRE FIGHTING Quantity Amount Quantity Amount Quantity Amount

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

with cast iron wheel ISI marked conforming to IS 5290 (Type -A)

with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required

Providing, installation, testing and commissioning of non-return

3 18.14 valve of following sizes confirming to IS: 5312 complete with - - - - -

rubber gasket, GI bolts, nuts, washers etc.as required :

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

4 18.16 63 mm dia male and female couplings duly bound with GI wire, - - - - -

rivets etc. conforming to IS 636 (type-A) as required :

Providing and fixing in position the industrial type pressure

16.8 gauges with gun metal / brass valves complete as required

Supplying and fixing first-aid Hose Reel with MS construction

6 18.17 spray painted in post office red, conforming to IS 884 complete - - - - -

with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.. - - - - -

Drum and brackets for fixing the equipmets on wall. Connections

from riser with 25 mm dia stop gun metal valve & M.S. Pipe and - - - - -

Supplying & fixing 63 mm dia gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

903 suitable for instantaneous connection to interconnect hose

pipe coupling as required :

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick

MS sheet, 1200 mm in height with air release valve on top and

flanged connection to riser, drain arrangement with 25 mm dia

gun metal wheel valve with required accessories, pressure

gauge and paintingwith synthetic enamel paint of approved

shade as required.

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing, fixing, testing & commissioning of 15mm dia quartzoid

9 18.21 bulb type sprinklers of rating 68 degree centigrade with required - - - - -

Providing & fixing flow switch in following sizes M.S. pipe

including connection etc as required.

SITC of sprinkler installation valve - - - - -

Providing, fixing, testing & commissioning of installation control

valve of cast iron body, brass/bronze working parts comprising of

water motor alarm, bronze seat clapper, clapper arm and

hydraulically driven mechanical gong bell to sound continuous

11 18.24 alarm when the wet riser/sprinkler system activates, pressure - - - - -

gauges, emergency releases, strainer, pressure switch, cock

valve complete with drain valve and bypass, test control box, ball

valves, MS pipe of required size, flanges, orifice plate, gasket etc

of follwing sizes as required :

Providing laying, testing & commissioning of 'C' class heavy duty

MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc. in ground including

12 18.6 welding, excavation & providing cement concrete blocks as - - - - -

supports, anticorrosive treatment with coaltar/asphalt tape as per

IS 10221, refilling the trench etc. of following sizes complete as

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Providing and fixing of fire sinage as per required area(as per

13 MR1 per fire norms) completed with all respect to the diretion of site No. 132.00 614 81,048.00 - 614.00 81,048.00 1,228 1,62,096

incharge/Architect.

SUB HEAD - II- (HYDRANTS SYSTEM) - - - - -

Providing & fixing angle iron (40mm x 40mm x 5mm ) door frame

and MS sheet (2mm thick) cum glass shutter of size 2.1 mtr x 1.2

mtr (N.S) with 25mm x 25mm x 3 mm angle frame all around &

stiffened in between i/c hinges, handle, locking arrangement,

painting with approved synthetic enamel paint i/c sign writing on

glass at internal hydrant including providing & Fixing MS sheet

2mm thick on remaining portion above door to close opening i/c

painting etc as required. (Internal)

Providing, Installation, Testing and Commissioning of Gun Metal

15 MR3 / Bronze Ball Valves screwed ends of following sizes as Each 3933.00 247 9,71,451.00 - - 247 9,71,451

required. (For sprinkler drain)

Supplying and fixing of Fire Man's axe with heavy insulated

rubber as per standard conforming to IS 926.

Providing two coats of synthetic enamel paint of approved shade

over a coat of primer. Prior to application of primer the surface

18 MR6 should be cleaned for any dirt, rusts, rough substance etc. - - - - -

Including painting of legends both direction arrow as per the

approval of the Project Manager.

SUB HEAD - III - (FIRE EXTINGUISHERS) - - - - -

Providing and fixing fire extinguisher of carbon dioxide type

consisting of brand new high pressure steel cylinder bearing IS:

7285 mark and having the approval of controller of explosives

20 MR-7 Nagpur, wheel type valve bearing IS:3224 mark internal - - - - -

discharge tube, 1 meter long high pressure discharge hose, non

conducting horn, suspension bracket, fully charged bearing IS:

making fixed to wall as directed conforming IS : 15683:2006

Providing and fixing ISI marked portable fire extinguishers of the

following type.

21.1 a Dry Chemical Powder ABC type of 6 Kg as per IS:15683 Each 4325.00 20 86,500.00 - - 20 86,500

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

DETAILED ESTIMATE FOR ELECTRICAL SERVICES

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

Sr.No. Item Description Unit gst on 12% including gst Princely Estate Zodiac Platinum

Cumulative Amount

1 SUB HEAD-: COMMON AREA LIGHTING Quantity Amount Quantity Amount Quantity Amount

Supply and Wiring for Switch controlled Primary light points with 1.5 sq. mm PVC

insulated FRLS multistranded copper conductor 1100 Volt grade wires in 25 mm dia

PVC surface conduit including cost of providing circuit wiring with 1.5 sq mm PVC

insulated FRLS multistranded copper conductor 1100 volt grade wires and including

cost of providing saddles hangers supports from soffit of slab etc for surface conduiting

and/or cost of cutting and filling chases for recessed conduiting and the cost of

providing and fixing a 6 amp 240 Volt grid plate mounted switch with modular cover

plate in a recessed GI box and including the cost of running 1.5 sq mm PVC insulated

FRLS multistranded copper wire for earthing etc. complete as per specifications and

Supply and Wiring for Secondary light points (Looping points) as per Item 1.0 with

1.5 sq. mm PVC insulated FRLS multistranded copper conductor 1100 Volt grade wires

in 25 mm dia PVC surface/concealed conduit including cost of providing saddles

1.2 1.55.1 hangers supports from soffit of slab etc for surface conduiting and/or cost of cutting Pt. 649 1.0633 690 270.00 1,86,322.06 33 22772.70 0 303 209094.7551

and filling chases for recessed conduiting and including the cost of running 1.5 sq mm

PVC insulated FRLS multistrande copper wire for loop earthing etc. complete as per

specifications and as required.

2 SUBHEAD:-CCTV - 0.00 0 0 0

2.1 1.18.2 2 Pair (4 core) From LV box to different points in flat. Metre 38 1.0633 40 2,000.00 80,810.80 0.00 0 2000 80810.8

3 SUB HEAD-:Cable Trays - 0.00 0 0 0

Supplying and installing following size of perforated Hot Dipped Galvanised Iron

cable tray (galvanisation thickness not less than 50 microns) with perforation not more

than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling

with G.I. suspenders including G.I. bolts & nuts, etc. as required.

4 SUB HEAD-: EARTHING - 0.00 0 0 0

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,

4.1 5.4 and providing masonry enclosure with cover plate having locking arrangement and Set 7,472.00 1.0633 7 945 - 2 15889.96 0 2 15889.9552

watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip

earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as

required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &

spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as

required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50mm)

5 SUBHEAD:-UPS (UNINTERRUPTED POWER SUPPLY) - 0.00 0 0 0

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess

6 SUB HEAD-:PANEL - 0.00 0 0 0

Outgoing comprising of : - 0.00 0 0 0

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Outgoing - 0.00 0 0 0

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections

7 SUBHEAD:-XLPE AL AR LT CABLE - 0.00 0 0 0

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable

of 1.1 KV grade of following size direct in ground in the same trench in one tier

horizontal formation including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

Supplying & making End termination with Brass compression gland and aluminium lugs

7.2 9.1 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor - 0.00 0 0 0

cable of 1.1 KV grade as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,

7.3 5.4 and providing masonry enclosure with cover plate having locking arrangement and No. 7472 1.0633 7 945 160.00 12,71,196.42 0.00 0 160 1271196.416

watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I.

7.4 6.2 tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including No. 518 1.0633 551 320.00 1,76,252.61 0.00 0 320 176252.608

holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other

metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for

lightning conductor complete as required. (For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for

7.7 6.8 lightning conductor complete as required. (For vertical run) RM 197 1.0633 209 9,792.00 20,51,131.22 0.00 0 9792 2051131.219

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long,

7.8 6.12 with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as No 121 1.0633 129 160.00 20,585.49 0.00 0 160 20585.488

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete

with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required

Supplly, installation testing and commissioning of pressure gauge dia. 100mm in water

8 SUBHEAD:-FIRE ALARMSYSTEM AND PA SYSTEM - 0.00 0 0 0

Supply, Installation, Testing, commissioning of Addressable Semi Flush Mounting

8.1 17.1.3 Resettable (NonBreaking Glass) MCP, Supplied with Special Reset Tool BRAND : Nos. 474 1.0633 504 - 20 10080.08 0 20 10080.084

(MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Supply, Installation, Testing, commissioning of Addressable Wall Mounting Sounder /

8.2 17.1.6 Hooter Cum Strobe Brand : (MORLEY/FIRELITE/Apollo or equivalent as approved Nos. 557 1.0633 592 - 20 11845.16 0 20 11845.162

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

8.3 18.11 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets - 0.00 0 0 0

conforming to IS 13095 of following sizes as required :

50 mm nominal bore

100 mm nominal bore

Providing, installation, testing and commissioning of non-return valve of following

8.4 18.14 sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers - 0.00 0 0 0

etc.as required :

65 mm nominal bore

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

SUB HEAD-: COMMON AREA LIGHTING -

Supply,Receiving and fixing in position, effecting proper connections, testing and

9 MR1 commissioning of Round light 20W LED Luminaire for Stair case and Electrical room Nos 1,873.00 812.00 15,20,876.00 66 123618.00 0.00 878 1644494

as per site condition ,complete in all repects .

SUBHEAD:-CCTV - 0.00 0.00 0 0

Supply, Installation, Testing & Commissioning of IP CCTV 3MP Varifocal Bullet - 3mp

@ 25 fps, H.264 Compression, 1/3" Low Illumination Aptina Cmos, Hisilicon DSP, IP

Bullet Camera with 3 megapixel HD 2.8 - 12mm Lens, 48 IR LED upto 35 meters,

Supports iOS & Android Apps. Supports ONVIF. IP66 Protection Rating. Supports

POE. Should support rest all features of IP camera such as Multi Streaming, Image

Snapshot, Full Screen Monitoring, Supports CBR & VBR, Motion Alarm, Online Users

upto 10, Video Format in AVI & JPEG, Supports Video Playback and Delete. Supports

D-WDR, 3D-DNR, ICR, Brightness, Contrast, Hue, Night Mode, Supports TCP/IP,

UDP, DHCP, FTP, DDNS, PPPoE, Supports Cell phone, PDA, 3GPP. etc. all complete

(App Make: Axis / Urmet / Sony)

Supplying of 1/2.8’’ Progressive Scan CMOS PTZ Dome Camera with laser

IR,Compression-H.264/MJPEG/MPEG4,Focal Length - 4.3-129mm, Optical zoom 30x

and digital zoom 16x,Max. Image Resolution-1920×1080,Frame Rate 50Hz:

25fps(1920×1080) 360° endless pan range and -2°-90° tilt range,240°/s Pan Preset

Speed and 200°/s Tilt Preset Speed,0.1°-160°/s Manual Pan Speed and 1°-120°/s

Manual Tilt Speed,256 presets programmable; preset image freezing capability ,8

patrols, up to 32 presets per patrol 4 patterns, with the recording time not less than 10

minutes per pattern,SD/SDHC card local storage Support up to 8 NAS storage; Edge

recording (transmit the videos from SD card to the NAS after network resumed) High

performance Laser IR LED covering up to 500m (IR) distance 3D intelligent positioning

function,3D DNR,Protection Level-IP66 standard,TVS 6,000V lightning protection,

surge protection and voltage transient protection.

Supply, Installation, Testing & Commissioning of NVR For Main Control Rooms- H.264

/ MPEG4 decoding. -32 Channel IP cameras inputs, 1 Audio In & 1 Audio Out, 1 Video

out @ VGA(1080P), 1 HDMI out (1080P). Real-time Display & Playback, Recording

Mode in Manual, Schedule & Alarm, Recording & Playback Up to 720P @ PAL per CH,

8x SATA HDD port, 8 alarm input & 1 output, Network ethernet Interface supports

10/100/1000, Multi-Remote Client upto 4, backup by USB, DVD-WR, With remote

control. PS2 interface for mouse. Supports DDNS, PTZ Control, RS-485, Digital Zoom,

Motion Detection, Video Loss, Alarm recording, Buzzer, Each Channel Backup,

Password Control, Firmware Update and Mobile applications. Power- 12VDC. etc. all

complete (App Make: Axis / Urmet / Sony)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

13 MR5 Streaming System: Control Room Equipments: 6U RACK IT INDUSTRY STANDARD EACH 7829 1.00 7,829.00 0.00 0.00 1 7829

RACK with ventilation, sliding shelves, power strips, etc. all complete.

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

14 MR6 Streaming System: Control Room Equipments: Special Surveillance 4TB 3.5" SATA EACH 10177.00 1.00 10,177.00 0.00 0.00 1 10177

HDD internal( For Servers). etc. all complete. (App Make: Seagate / WD)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

15 MR7 Streaming System: Control Room Equipments: 24 Port L2 Managed 10/100/1000 Mbps EACH 34261.00 1.00 34,261.00 0.00 0.00 1 34261

Switch, Rack Mountable etc. all complete. (App Make Dlink / Netgear / Cisco)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Control Room Equipments 24 Port Unmanaged POE 10/100/1000

Mbps Switch, Rack Mountable etc. all complete. etc. all complete. (App Make Dlink /

Netgear / Cisco)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording &

Streaming System: Cat6 Unarmoured Cable for POE purpose. 10-Gigabit Ethernet

speed with frequency upto 500 MHz. Max cable length of 90 meters (Quantity in

running Meter) etc. all complete. (App Make Finolex / Panduit / TYCHO / Molex)

Intercom system - For Lift - 0.00 0.00 0 0

SUB HEAD-:Cable Trays - 0.00 0.00 0 0

19.2 MR11 Supplying and installing electrical shaft fire rated door as per existing sgaft sizes. No. 15 919 272.00 43,29,968.00 10 159190.00 0.00 282 4489158

SUB HEAD-:Rising Mains (In Airinsulated Construction) - 0.00 0.00 0 0

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Design, manufacture, supply, assembling, installation, testing and commissioning of

following suitable rating TPN Rising Mains of Aluminium bus bars with flange end

20 MR12 connection, deg, bend shall be made of minimum 1.6 mm thick dual housing (Electro - 0.00 0.00 0 0

galvanised sheet + Aluminium) with epoxy polyster powder coating of ANSI 49 GRAY

on outsideas and integral earthing conductor through out the length of the Rising mains

20.1 MR12.1 800 Amps Rising Mains described as above ( 45 kA ) RM 38068.00 - 4 152272.00 0.00 4 152272

Supply installation tapoff box testing and commssining with meter board cable and

21 MR13 rising main of 125 Amps FP MCCB with Thermal magnetic based releases for SC and No. 26758.00 52.00 13,91,416.00 0.00 0.00 0.00 52 1391416

OL protections - 1 Set

Design, manufacture, supply, assembling, installation, testing and commissioning of

following rating End Feed Unit as per common general secifications

800A End Feed Unit with TPN feeder having 800A 4P MDO ACB 50KA including

ON/OFF/ TRIP indication & 3 phase indication with suitable size control MCB. Suitable

23 MR15 links for rising mains terminations, floor mounted, free standing as per Standards Set. 5,93,854.00 - 1 593854.00 0.00 1 593854

complete in all respect. Taping of rising mains should be suitable for 1250A rising

mains in two direction up/ down from a middle floor level.

SUBHEAD:-UPS (UNINTERRUPTED POWER SUPPLY) - 0.00 0.00 0 0

Supply, installation, testing and commissioning of 1 x 2.5 kVA UPS, single phase (220

V + 15%) Volts input & 1 phase output (220 V + 1%), 50 Hz, Input harmonic Current

THD 3% typical at 100% load, 6% maximum at 50% load and 90 min battery backup

for UPS along with battery cabinet complete in all respect including supporting steel

structure for UPS and Battery as required. Quoted price shall be inclusive of

approved rating single core copper conductor cable connecting UPS and batteries.

SUB HEAD-:PANEL - 0.00 0.00 0 0

25 MR17 MAIN COMMON LT PANEL(ESS-1&2) - 0.00 0.00 0 0

Incomer comprising of : - 0.00 0.00 0 0

500 amps 4 Pole MCCB with Microprocesser release for SC & OL and EF protections

ON / OFF / TRIP indicating lights with control MCB -1 Set - 0.00 0.00 0 0

Phase indicating light protected by 2 amps MCB’s - 1 Set. - 0.00 0.00 0 0

Bus Bar comprising of : - 0.00 0.00 0 0

600 Amps FP ,10KA FOR 1 SEC Aluminium Bus Bar with colour coded heat shrinkable

Outgoing comprising of : - 0.00 0.00 0 0

250 amps 4 Pole MCCB with thermalmagnatic release for SC & OL and EF

protections - 14 Set

MAIN COMMON LT PANEL(ESS-1&2) described as above Set. 328489.00 - 2 656978.00 0.00 2 656978

26 MR18 SUB COMMON LT PANEL(FOR ALL 22 TOWER) - 0.00 0.00 0 0

Incomer comprising of : - 0.00 0.00 0 0

250 amps 4 Pole MCCB with Microprocesser release for SC & OL and EF protections

ON / OFF / TRIP indicating lights with control MCB -1 Set - 0.00 0.00 0 0

Phase indicating light protected by 2 amps MCB’s - 1 Set. - 0.00 0.00 0 0

Bus Bar comprising of : - 0.00 0.00 0 0

300 Amps FP ,16KA FOR 1 SEC Aluminium Bus Bar with colour coded heat shrinkable

Outgoing comprising of : - 0.00 0.00 0 0

All breakers shall be minimum 10 kA rating with Icu = Ics. - 0.00 0.00 0 0

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

SUB COMMON LT PANEL(FOR ALL 22 TOWER) described as above Set. 211725 - 22 4657950.00 0.00 22 4657950

27 MR19 METER BOARD (FOR COMMERCIAL ) (INDOOR TYPE) - 0.00 0.00 0 0

Incomer comprising of : - 0.00 0.00 0 0

250 amps 4 Pole MCCB with Microprocesser release for SC & OL and EF protections

ON / OFF / TRIP indicating lights with control MCB -1 Set - 0.00 0.00 0 0

Phase indicating light protected by 2 amps MCB’s - 1 Set. - 0.00 0.00 0 0

Bus Bar comprising of : - 0.00 0.00 0 0

300 Amps FP ,16KA FOR 1 SEC Aluminium Bus Bar with colour coded heat shrinkable

Outgoing comprising of : - 0.00 0.00 0 0

63 amps 4 Pole MCB with Dual source energy meter (V, Hz & A, kW, KWh, kVA) with

RS 485, required rating 3 No. CTs etc - 19 Set

63 amps 4 Pole MCB- - 2 Set Spare - 0.00 0.00 0 0

METER BOARD (FOR COMMERCIAL ) (INDOOR TYPE) described as above Set. 627817.00 - 0.00 3.00 1883451.00 3 1883451

28 MR20 DG AUXILIARY PANEL - 0.00 0.00 0 0

Incomer comprising of : - 0.00 0.00 0 0

200 amps 4 Pole MCCB with Thermalmagnatic release for SC & OL and EF

protections - 1 Set

ON / OFF / TRIP indicating lights with control MCB -1 Set - 0.00 0.00 0 0

Phase indicating light protected by 2 amps MCB’s - 1 Set. - 0.00 0.00 0 0

Bus Bar comprising of : - 0.00 0.00 0 0

300 Amps FP ,16KA FOR 1 SEC Aluminium Bus Bar with colour coded heat shrinkable

Outgoing comprising of : - 0.00 0.00 0 0

63 amps 4 Pole MCB with DOL starter - 8 Set - 0.00 0.00 0 0

DG AUXILIARY PANEL described as above Set. 192666 - 0.00 2.00 385332.00 2 385332

Feeder Pillar (For External Landscape lighting)

IP 55 for outdoor Protection

63 Amps 4 pole MCB as incomer - 0.00 0.00 0 0

100 Amps TPN Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set - 0.00 0.00 0 0

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP RCCB’s - 0.00 0.00 0 0

of 30 mA leakage current with separate neutral link of each phase- 1 set (33%)

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP RCCB’s - 0.00 0.00 0 0

of 30 mA leakage current with separate neutral link of each phase- 1 set (33%)

Feeder Pillar for external / landscape lighting as described above 194545 - 0.00 2.00 389090.00 2 389090

30 MR22 LIFT PANEL(FOR 11 No Tower) - 0.00 0.00 0 0

Incomer comprising of : - 0.00 0.00 0 0

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Auto source transfer switch four pole 125A, with complete neutral overlap suitable for

Cable on incoming & bus bar connection on outgoing side and to be connected as - 0.00 0.00 0 0

125 amps 4 Pole MCCB with thermal magnetic release for SC & OL and EF

protections - 1 Set

Dual source energy meter (V, Hz & A, kW, KWh, kVA) with RS 485,& with 125/5 , CL 1,

required rating 3 No. CTs etc - 1 Set

ON / OFF / TRIP indicating lights with control MCB -1 Set - 0.00 0.00 0 0

Phase indicating light protected by 2 amps MCB’s - 1 Set. - 0.00 0.00 0 0

Bus Bar comprising of : - 0.00 0.00 0 0

160 Amps TPN ,25KA FOR 1 SEC Aluminium Bus Bar with colour coded heat

shrinkable steeve - 1 set

Outgoing comprising of : - 0.00 0.00 0 0

63 amps 4 Pole MCCB - 3 Set - 0.00 0.00 0 0

LIFT PANEL(FOR 11 No Tower) described as above Set. 3,29,300.00 - 11 3622300.00 0.00 11 3622300

Feeder Pillar (For External Landscape lighting)

IP 55 for outdoor Protection

63 Amps 4 pole MCB as incomer - 0.00 0.00 0 0

100 Amps TPN Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set - 0.00 0.00 0 0

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP RCCB’s - 0.00 0.00 0 0

of 30 mA leakage current with separate neutral link of each phase- 1 set (33%)

63 Amps TP contactor 0-24 hours timer,and photo cell sensor auto / manual and

outgoings including 24 No. 10/16/20 Amps SP MCB with 3 Nos. 40 Amps DP RCCB’s - 0.00 0.00 0 0

of 30 mA leakage current with separate neutral link of each phase- 1 set (33%)

Feeder Pillar for external / landscape lighting as described above No. 194545 - 3 583635.00 0.00 3 583635

Supply , installation testing & commissioning of 'Silent Type' New Diesel Generating

Set along with having prime power rating 380KVA, 415 Volts at 1500RPM, 0.8 lagging

Factor at 415 V suitable for 50 Hz, 3 phase system and for 0.85 load factor and

consisting of the following:-

Note:- Contractor check old DG set on site. - 0.00 0.00 0 0

C Diesel Engine - 0.00 0.00 0 0

Diesel Engine 4 stroke radiator cooled, electric start, of suitable BHP at 1500 RPM

suitable for above output of alternator at 400C, 50% RH & at 1000 metre MSL and

confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for one - 0.00 0.00 0 0

hour after 12 hours of continuous operation. The engine will be fitted complete with all

the required accessories.

D Engine Mounted Instrument Panel fitted with and having digital display for following: - 0.00 0.00 0 0

E Start- stop switch with key. - 0.00 0.00 0 0

F Water Temperature indication - 0.00 0.00 0 0

G Lubrication Oil pressure indication - 0.00 0.00 0 0

H Battery charging indication - 0.00 0.00 0 0

I RPM indication - 0.00 0.00 0 0

J Over Speed trip Indication - 0.00 0.00 0 0

K Low lubrication oil trip indication - 0.00 0.00 0 0

L Engine Hours Indication - 0.00 0.00 0 0

M Alternator: - 0.00 0.00 0 0

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

Synchronous alternator rated at 380 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz, AC

Supply with 0.8 lagging power factor at 400C, 50% RH & at 1000 metre MSL. The

alternator shall be having SPDB enclosure, brushless, continuous duty, self-excited

and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable for tropical - 0.00 0.00 0 0

conditions and with class- F insulation. Alternator shall have provision of end

termination of Aluminium cable as per existing cable on site.

N Base Frame & Foundation - 0.00 0.00 0 0

Both the engine and alternator shall be mounted on suitable base frame made of MS

channel with necessary reinforcement which shall be installed on suitable cement

concrete foundation and vibration isolation arrangement as per recommendations of

Daily service fuel tank of 520 litres capacity, fabricated out of 3mm thick M.S. sheet

complete with all standard accessories and fuel piping between fuel tank and diesel

engine with MS class 'C pipes of suitable dia. Complete with valves level indication &

accessories as required as per specifications.

P Exhaust System : - 0.00 0.00 0 0

Dry exhaust mainfold with hospital grade exhaust silencer. - 0.00 0.00 0 0

Q Starting System: - 0.00 0.00 0 0

24V DC starting system comprising of starter motors: voltage regulator and

arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160 AH - 0.00 0.00 0 0

lead Acid type) as required as per specifications.

Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling

R of the engine & alternator, extraction, discharging hot air into the atmosphere as per - 0.00 0.00 0 0

specifications. The Acoustic Enclosure shall be factory fitted by the OEM.

S The DG Set shall be provision of automation compatibility. - 0.00 0.00 0 0

Diesel Generating Set 380 KVA including Acoustic Enclosure. described as

SUBHEAD:-XLPE AL AR LT CABLE - 0.00 0.00 0 0

Supply testing of under noted sizes of Aluminium conductor XLPE insulated PVC

sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power

33 MR25 distribution cables conforming to relevant IS code and as per specification in ground - 0.00 0.00 0 0

(including trenches) through pipe or on wall / racks cable trays including dressing and

clamping the cable with MS zinc passivated clamps etc. as required.

Supplying, laying, connecting,terminating, testing & commissioning of under noted

sizes of PVC insulated, PVC sheathed unarmoured and overall PVC sleeved 1.1 KV

34 MR26 grade control cables in pipe, wall, racks, cable trays, including, dressing, clamping with - 0.00 0.00 0 0

M.S Zinc passivated clamps etc as required conforming to relevant IS code and

technical specifications.

Retro fit of dual kit (Diesel to CNG ) with RECD as per latest CPCB Norms of existing

SUB HEAD-:VFD PANEL - 0.00 0.00 0 0

SITC OF VFD PANEL FOR PUPM ROOM

36 MR28 Note rating as per existing pump rating.up to 50KW pump Set 242248.00 - 2 484496.00 0.00 2 484496

SUB HEAD-:EXISTING DG AUTOMATION - 0.00 0.00 0 0

Automation of existing DG set with DG synchronization panel cummins make, PC-3.3

37 MR29 and interlocking with all Dg set. Set 207641.00 - 1 207641.00 0.00 1 207641

Digitally signed by ANUJ

"Repair/Modification and Upgradation of Civil, MEP etc. works of 03 Amrapali projects i.e., Princely Estate, Zodiac And Platinum Titanium at Noida " on Percentage Rate Basis

SUBHEAD:-FIRE ALARMSYSTEM AND PA SYSTEM - 0.00 0.00 0 0

Supply installation Testing & Commisioning of wall/Floor recess mounting

microprocessor based main & Zone Fire Control Panel with alarms suitable for RS

485 (networking panel) Communication, potential free contacts, PA amplifier, controls

and indications as per detailed specifications with an integral power supply unit and

complete with a suitably rated set of batteries and trickle charged from 240 volt AC

main supply including the cost of mounting accessories 40 x 2 Line display E-EPROM

event logging as required complete .The console shall have all Call/Zone selection

Facility with Microphone.

Repair, commissioning and testing require for all tower, wall/Floor recess mounting

microprocessor based main & Zone Fire Control Panel with alarms suitable for RS

485 (networking panel) Communication, potential free contacts, PA amplifier, controls

and indications as per detailed specifications with an integral power supply unit and

complete with a suitably rated set of batteries and trickle charged from 240 volt AC

main supply including the cost of mounting accessories 40 x 2 Line display E-EPROM

event logging as required complete .The console shall have all Call/Zone selection

Facility with Microphone.

Repair, commissioning and testing require for all tower of the Addressable Manual Call

Points complete as required as per specifications.

Repair, commissioning and testing require for all tower of the Fire Alarm Hooter and

41 MR33 Strobe suitable for recessed/surface mounted including addressing module complete in No. 6354 150.00 9,53,100.00 0.00 0.00 150 953100

all respect as required

Supply, installation, testing and commissioning of the Fire Alarm multi tap Speaker

suitable for wall mounted/Ceiling Mounted Speaker including addressing module

having an audible range of 25 meters complete in all respect as required.

Note: Wattage of speakers shall be calculated by vendor as per site requirement.

43 MR35 Supply, installation, testing and commissioning of the Amplifire No. 63040.00 13.00 8,19,520.00 0.00 0.00 13 819520

Wiring for Fire detector/speaker/modules/devices with 2 core 1.5 sq mm PVC

sheathed copper conductor 1100 volts grade flexible twisted pair Fire survival armored

44 MR36 cable with saddles including termination, gland and providing/fixing 1.2 mm thick GI box RM 205.00 600.00 1,23,000.00 400.00 82000.00 4180.00 856900.00 5180 1061900

with grid plates with earthing complete in all respect.

Note: Length of cables sall be taken from the final layout.

Supply & fixing of 25 mm dia 16 gauge PVC Conduit in slab buried including all

45 MR37 connecting joints, bends etc as required as per the site condition. RM 87.00 600.00 52,200.00 0.00 0.00 600 52200

Supplying and installing testing,commisioing DG synchronization panel cummins

make, PC-3.3 and interlocking with all Dg set

47 MR39 Main LT panel Automisation with all DG set. Set 553710.00 - 0.00 1.00 553710.00 1 553710

SUBHEAD:-UPS (UNINTERRUPTED POWER SUPPLY) - 0.00 0.00 0 0

Supply installation testing & commissioning of DG cooling tower cap. 250 TR including piping,

valves, pumps, cable, starter complete in all respect.

Digitally signed by ANUJ