GENERAL-PyIP - Main and branch canals - Repair of shutters in the main canal between ch 28-000 and ch 42-000km, providing shutters in Edakkad branch canal up to ch 8-600 km and Azheekkal Branch canal up to ch 12-285 km-General Mechanical Work

Amount

Clearing grass from canals and periphery etc.

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Dismantling and removing the existing canal shutters

OD21222/2023-2024:Dismantling of the Canal Shutter ( up to 2 Tonne weight ) /Hoist unit /Embedded parts etc. the same and stacking at distance of 100m including hire of machinery labour etc. complete as direct by the departmental officer at the site (weight of unserviceable shutters and embedded parts may be calculated as 60% unservicable, hoisting unit as 80%) Rate analysis for 1 tonne

OD21462/2023-2024:Convey the scrap materials to nearest custodian office. Cost includes of conveyance, loading and unloading charges etc. complete

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Supply, Fabrication, Erection of embedded parts for shutters

OD27498/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD27499/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD27500/2023-2024:Supply of MS round bar with diameter more than 12mm including the cost of conveyance charges

OD21483/2023-2024:Fabrication and erection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD21489/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for planning, welding, shearing, grinding etc, lead and lift, conveyance, incidental and handling etc complete Rate analysis SS Embedded parts 2.6Qtl

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply and Fabrication of Canal shutters

OD27501/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD27502/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD27503/2023-2024:Supply of MS round bar with diameter more than 12mm including the cost of conveyance charges

OD21307/2023-2024:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight )/Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis for 9.6qtl fabrication

OD21308/2023-2024:Supplying and fixing cast steel thrust roller assembly having 120mm Dia, 50mm tread width, SS(304) shaft 50mm dia, 120mm long and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete Rate analysis for Thrust roller-1No

OD21309/2023-2024:Supply of MS bolt and nuts

Supply and fixing of Rubber seals

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply and Fabrication of Hoist bridge, Worm reducer, base & Nut, Screw rod etc..

OD27504/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD27505/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21319/2023-2024:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight )/ Hoisting Bridge/ Plat form and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis for 9.6qtl fabrication

OD21320/2023-2024:Supply of MS bolt and nuts

OD21322/2023-2024:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour and complete

OD21321/2023-2024:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials, labour ,hire charges and conveyance

OD21323/2023-2024:Operating handle for base and nut , cost include cost of mateials, making, supply ,conveyance, labour etc.

OD21324/2023-2024:Providing EN-8 Screw rod 7.5 tonne capacity 4.00m lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5cm /min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance 1m screw rod dia 67mm with single start square thread with head pitch of 12.7mm root dia 62.3mm EN-8 shaft

OD21325/2023-2024:Providing EN-8 Screw rod with one number of screw shaft ,hand operation including cost of all materials, labour, hire charges and conveyance 1m screw rod having screw shaft dia 53mm with single start square thread 50 mm dia screw

Overhauling the existing Gear box/ Worm reducer

OD21326/2023-2024:Overhauling the Gear box of canal shutter - cleaning and greasing the gear wheels, changing the bushes, damaged nut and bolts etc complete and re fixing. cost includes cost of all materials, labour charges,hire charges of tools etc. complete data for 1no

Painting and Erection of Shutters, Hoisting bridge and unit etc.

OD21327/2023-2024:Erection of the Canal shutter (Up to 2 tonnes weight)/Hoist Bridge/ Platform including handrail, ladder etc same including. Alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance ,lead and lift charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Overhauling Gate valves

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

OD21334/2023-2024:Overhauling the existing gate valve of field distributaries after cleaning the same, greasing, changing the nuts and washers, supply of handle, cover plate and trail run as per directions from deptl. officers at site. cost includes cost of all materials, labour, conveyance etc.. data for 1no

PEETHAMBARAN

U.MARAKKAR

Bidder Name

PEETHAMBARAN

JOBIN JOSEPH

U.MARAKKAR