WBPWD/EE/PED/NIQ27_3rd Call/2023-2024

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5]

Average run 8 mtr [E-15/5(c)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish [E-15/4]

On Board [E-15/4(a)]

Average run 6 mtr [E-15/4(e)]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/26]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/22]

Supply & Fixing 240 V, 2 nos 5A, plug socket with separate 2 nos 5 A Piano key type switch (Brand Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making and necy connection with socket with 3 no. “Ph,N & E” copper bar.[NS]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module PVC Modular type switch board with 4 Module top cover plate flushed on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17] ( Street Light)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.[NS]

2+10 way Make:-L&T Enclosure (LTSD12N) or equivalent make of Siemens/ ABB /approved by EIC. [D-10/13]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10/14]

4 way Make:-L&T Enclosure (LTTD04N) or equivalent make of Siemens/ ABB /approved by EIC. [D-11/14]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

40 A DP Make:-L&T or equivalent make of Siemens/ ABB /approved by EIC. [D-5/6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [ Make- L & T or equivalent make of Siemens/ ABB /approved by EIC].

40 A FP Make:-L&T [D-6/7] for HTPN Incomming

32 A SP Make:-L&T [D-6/7] for SPNDB

16 A SP Make:-L&T [D-6/7] for Power Point

10 A SP Make:-L&T [D-6/7] for Computer Board

6 A SP Make:-L&T [D-6/7] for Switch Board

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [D-3/4(a)]

63A Make:-L&T [D-3/4(a)]

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [ Make- L & T or equivalent make of Siemens/ ABB /approved by EIC]. [D-2/3(a)]

415V FP 63 A Make:-L&T

Supply of following 1.1 Kv grade XLPE insulated Armoured Aluminium cables- [NS ]

2 core 6 sqmm cable for roof top light [NS]

4 core 16 Sq mm cable

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [F-3/5]

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [F-3/5(i)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

upto 2 core 6 sqmm [F-4/7(a)]

upto 4 core 16 sqmm [F-4/7(c)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 6 sqmm cable [F-5/8(b)(ii)]

4 core 16 sqmm cable [F-5/8(b)(xii)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

1.5sqmm [NS]

2.5sqmm [F-5/9(i)]

4 sqmm [F-5/9(ii)]

6 sqmm [F-5/9(iii)]

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm) [E-9/1(b)]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [E-9/1(s)] for Computer and power point

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [E-9/1(y)] for HTPN to SPN DB Connection

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) [E-2/1]

19mm dia 3mm thick Polythene Pipe [E-2/1(b)]

Supply of 4' 18W T8 LED tube light with complete set (Make:- Philips TMC 502 P 1 x T- LED 22W , including Master LED tube 1200 mm 18W 865 T 8 I -2100 lm Or equivalent make of Bajaj/ Crompton/ Havells)

Supply of 1200 mm (48") sweep 230 V, AC Ceiling fan complete with blade, canopy, down rod upto 1 ft. [Make- Usha striker or equivalent make of ORIENT/Crompton/ Havells [NS]

Supply & fixing of 9'' 1370r.p.m sweep AC exhaust fan (Make - EPC heavy duty/ Crompton/ Havells) . [NS]

Supply & fixing of 70/ 72 Watt LED street light of following specifications on the roof top -[Make- Crompton RAPTOR NEO , Cat No. TRP -409-70-57-SL-GL-NSG or equivalent make Bajaj/ Phillips / Havells [NS ]

Supplying & Fixing LED bulk head light fitting (Make:-Philips, Model:-WT140W or equivalent make of Bajaj/ Crompton/ Havells/ Wipro )

Supply of 10W LED lamp (Make:Crompton/ Philips / Havells ) [NS]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4/28]

Supply & Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [C-4/30]

Fixing only lamp [C-2/11]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [D-13/22]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]

S & F 65mm dia x 1.5 mtrs. Long G.I mini pole (ISI-M) with welded base plate of 225mm. x 225mm. x 6mm. thick with necy. holes for HPSV/LED light fittings incl providing (6:3:1) base block dimension 0.45x0.45x0.60 mtr above from ground leavel cemented 3 mm thick incl 8"x 6"x 4" GI loop box as per direction of E.I.C. including Supply and laying 3 x 1.5 sqmm FRLS copper conductor PVC insulated from loop box to light fittings via Mini pole and Arm bracket including painting of pole and Arm bracket including S & F 32mm dia 1.5mtr long GI Arm Bracket.

Excavation of soil for installation of Earth Electrode and filling & ramming. [G-1/1]

For Morrum Soil [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

By ISI-Medium GI pipe [G-1/2(a)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Solid GI Wire No. 4 SWG [G-2/5(a)(i)]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)]

Supply, Installation, Testing and commissioning of LED Illumination sign board fabricated by 8' x 4' (ft) x 5" (inch) depath ACP box supported with 1"x1" MS hollow square pipe or Aluminium Hollow square pipe of 18 swg. All around. The 3 mm ACO facial should be provide3d with Laser cutting 6 mm laser cut Acrylic letters out of which 5 mm rising and border line of the front side shold with cover 1" Alluminium channel as per the direction of EIC. The sign board should be glow by 1.5 W LED module cool white in colour including 12 V 250 W power supply. Back side of the board should be covered with 26 swg GI sheet to protect rain water. The sign board should be fixed at the wall by using nut, bolt, washers etc. after making MS structure and grouting the same at wall and mending good the damages as per direction of EIC. The cost of transportation and scaffolding charges are included. inscription of the sign board should be as per direction of authority and as per direction of EIC.

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) [J-1/1]

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works [J-1/9]

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work [J-1/11(a)]

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required [J-2/13]

Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint [J-1/6]

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run [J-1/7]

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 25 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: [J-1/4]

Length upto 0.5 Mtr [J-1/4(a)]

Excavation of soil for installation of Earth Electrode and filling & ramming. [G-1/1]

For Morrum Soil [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: [G-1/2]

By ISI-Medium GI pipe [G-1/2(a)]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [G-2/3(b)]

SITC of 10 KVA , 415V, 50 Hz, 3 phase new DG set,comprising of Engine,alternator,separate AMF panel,base frame,Fuel tank,Battery,CPCB-II approved Engine & Acoustic Enclosure having following specifications:-[ Make- Cummins/ Caterpillar/ Volvo/ Kirloskar or approved by EIC]

Model:-C15D5P Duty:-Prime Power Rating kVA / kWe:-10/8 No. of Phases:-3 Phase Output Voltage (V):-415 Power Factor:-0.8 (lagging) Current (3 phase) (A):-21 Frequency (Hz) and RPM:-50 Hz, 1500 RPM Engine Specification:- Make:-Cummins® Model:-X1.3TAA-G1 MoEF Certified Power (bhp):-23 Required Power for Rated kVA (bhp):-21 Cooling:-Liquid Cooled (EG Compleat 50:50) Aspiration:-Turbocharged, Charge Air Cooled No. of cylinders:-2, In-line Bore (mm) x Stroke (mm):-95 x 91 Compression ratio:-18.3:1 Displacement (litre):-1.29 Fuel:-High Speed Diesel Fuel consumption @75% load with radiator and fan* (litre/hr):-3.28 Fuel consumption @100% load with radiator and fan* (litre/hr):-4.27 Performance class of generator set:-ISO 8528-5 G2 Starting system:-12 V DC Electrical Lube oil specification:-CH4 15W40 Lube oil sump capacity, High-Low level (litre):-4 - 3 Total lubrication system capacity (litre):-4.5 Total coolant capacity (litre):-5.5 Exhaust pipe size (inch):-1.5 Total wet weight (Engine+Radiator)## (kg):-180 Length x Width x Height (Engine) (mm):-481 x 715 x 662 Mean Piston speed (m/s):-4.6 Combustion air intake @100% load (±5%) (cfm):-61 Exhaust Temperature (°C):-346

Alternator Specification:- Make:-Stamford (CGT) Alternator frame:-PI044D Enclosure:-IP23 Voltage regulation (Max.):-±1% Class of Insulation:-H Class Winding Pitch:-2/3 Stator Winding:-Double layer lap Rotor:-Dynamically Balanced No Waveform distortion/ Total Harmonic Distortion:-No load < 1.5 %, Non distorting balanced linear load < 5 % Maximum Unbalanced Load across phases#:-less than or equal to 25% Telephonic Harmonic factor:-< 2%

ACOUSTIC ENCLOSURE The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustic enclosure must be certified as per CPCB-II norms.

BASE FRAME Common iron channel fabricated base frame containing the engine and alternator ,mounted on AVM pads and having provision for lifting Hook.

Erection of foundation of 10 KVA D.G.Set(silent) at outdoor designed approved by EIC or having dimension given below a)4 inch deep(below ground)PCC of size 2500 mm x 1500 mm & 300 mm above G.L. b) 15 inch thick brick wall,4 inch deep PCC keeping central part as follows- c) Filling the hollow portion with mixture of sand & shifted soil. d) 6 inch deep RCC with 8 mm double mesh rod at the top of the brick foundation of size 2500 mm x 1500 mm x 300 mm incl providing foundation bolts,jum nuts etc.

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts [G-1/2(d)]

Extra of treatment of soil by using salt & charcoal for pipe electrode.[G-2/3(b)]

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS.(Morrum soil)[G-1/1(b)]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)]

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. [G-3/5(d)]

S & F compression type gland complete with brass gland,brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable as below

upto 2 core 6 sqmm [F-4/7(a)]

upto 4 core 16 sqmm [F-4/7(c)]

Finishing the end of following XLPE/PVC armoured cable by crimping method incl. S &F solderless socket (Dowels make) tapes anticorrosive paste and jointing materials

2 core 6 sqmm cable [F-5/8(b)(ii)]

4 core 16 sqmm cable [F-5/8(b)(xii)]

Supplying & fixing medium gauge 40 mm dia GI Pipe ( ISI-M) Protection with necessary fittings and jointing metarials as reqd.[F-6/11©]

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / Gloster/Havells]

2 core 6 Sq mm

4 Core 16Sq. Mm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [F-3/5]

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [F-3/5(i) ]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [F-2/1(a)]

MOON LIGHT HOUSE

RAHUL TRADERS

SREE LALJI

MODERN ELECTRICALS

TARUN DEY