PROVN OF COVERED SHED FOR LT REGT AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Excavating in post holes (or simlar holes) each n exc. 0.50 cum getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, Type B1, (20mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:2:4, type B1 (20mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L for roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections,complete all as specified and as directed.

S & F of mild steel scew bolts 5 to 10 mm (Machine made) with hexagonal or squre heads at one end and screwed the other , or screwed both ends, each screw end to be fitted with washers and one hexagonal or squre nut , exc 5 cm but n exc 10 cm long complete all as specified and directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for Machine pressed Precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 80mm thickness M-40 Grade over and including 50 mm thick sand screed bed/cushioning etc. complete all as spd and directed.

M/S Krishna Construction Co.

Saraswati Auto Works

R D ENTERPRISE

RC Madan

M/S RANA ENGINEERING ENTERPRISE

Markson

M/S KAMAKHYA CONSTRUCTION AND BUILDERS

M/S SR BUILDERS