Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹26.3 L+₹1.3 L (5.00%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L2 | Rejected-Finance NOT BEING L1 |
Tender Value
₹27.4 L
EMD Value
₹54,700
Closing Date
26 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE KARGIL
MES OFFICE KARGIL, LADAKH
SPL REPAIR TO BLDG NO T-58 TE-43 T-41 PROVN OF TOILET AT QUARTER GUARD AND PROVN OF 10 X GEYSERS IN INF BDE AT KARGIL UNDER GE KARGIL
2022_MES_541694_1
GE/K-30/2022-23
Open Tender
Civil Works
Item Rate
180 days
KARGIL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE KARGIL
₹54,700
Yes
28 Sept 2022
28 Jul 2022
29 Aug 2022
28 Jul 2022
26 Aug 2022
12 Aug 2022
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.
Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.
S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.
S & F 25 mm thick second class teak wood beading rectangular/square /rocked in shape weight finished of size no exc 3 sqcm fixed with screwed duly frenched polished (two coats ) all as specified and directed.
M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed.
S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on ceiling complete all as specified and directed.
S & F 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work in walls complete all as specified and directed.
S & F 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination on both sides, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. including 15mm thick screed bed in CM (1:6)complete all as specified and directed.
S&F in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.
S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap bent to curve, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.
All as per item no 14 above but except galvanised, corrugated mild steel sheeting.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.
M & L for second class hard wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.
Supply and fix mild steel framed work as in door or gates of angle or other sections with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165 (machine butt hinges and flat iron hold fasts to be measured separately)
S & F second class hard wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.
S & F second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified.
S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.
S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed.
S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.
S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.
S&F Mild steel sliding door bolt 300 mm long plate type slove enamelled black wioth bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed.
M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.
M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface.
M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed.
Demolition of concrete of any description and in any position and removal of rocks/debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point.
M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 20mm thick (1:6) screed bed complete all as specified and directed
M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, mass filling , sub base and the like complete all as specified & directed.
M & L for chequered cement concrete tiles 20x20x25mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including 15 thick screed bed in CM ( 1:6) all as specified.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces.
M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in hard dense soil complete all as specified & directed.
Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified & directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified & directed.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
M&L for hardcore with broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.
M & L for 100 mm thick plain cement concrete 1:3:6. type C-2 (using 20mm graded stone aggregate) as in subbase to flooring and as in plinth protection without using extra cement complete all as specified & directed.
M & L for coloured non-skid ceramic tiles 7 to 8mm thick ( square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15mm thick screed bed in CM ( 1:6) complete all as specfied and directed.
M & L for coloured glazed ceremic tiles in vertical surfaces 450X 350X 7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15mm thick rendering in CM (1:4) complete all as specfied and directed.
M&L rendering 15mm thick cement plaster in cement mortor (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.
M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces.
M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified..
S&F MS Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment Fe.290.Gde-E-165.
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as directed.
S&F 3mm thick figured glass ordinary quality and glazing fixed with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing complete all as per specification and directed.
S&F aluminum anodized ‘D’ type handles 125 mm complete all as specified and directed .
S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S & F 100 mm Brass polished butt hinges type B12 complete all as specified and as directed.
S&F 16mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
All as per item no. 68 above but 25mm outer diameter.
S&F in repair 25mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified.
S&F 32mm dia Waste coupling of PTMT for WHB including waste pipe complete all as specified.
S & F stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).
S&F 15mm bore PVC connection 600mm long both ends screwed with brass cap all as specified
S & F 15 mm dia bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight (15mm-90gms).
S&F 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixedscrewed for iron pipe and fixed complete all as specified and directed.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified & directed.
S&F 500 ltr capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position.
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.
Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.
All as per Srl item No 89 here in before but for one 3 pin 5 Amps switch socket on same board.
All as per Srl item No 89 here in before but for one 3 pin socket outlet 5 Amps on independent board.
Description all as per item No 89 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for industrial plug socket. point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.
Switch piano flush type 5 Amps, single pole one way.
S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.
S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type.
S&F Lamp holder, insulated body with back plate suitable for batten fittings
S&F Ceiling rose surface bakelite 65x50mm, two to three terminals.
S&F Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.
Supply and fix in replacement MCB Distribution board , 240 volts single pole and neutral ,single door, sheet steel, enclosure powder coated with 200Amps rated busbar with neutral link, 4 ways, SPN QVE Serics , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engr-in-Charge.
S&F Sheet metal enclosure for DB's Single door, single pole and neutral 2 way . Complete all as specified and directed.
S&F MCB SPN 240V, 10 KA, C Series and current carrying capacity in the MCB DB complete with connection testing and commissioning of single pole size 40 amp.
S&F MCB, single pole and neutral, 63 Amp, 240V, 10KA.
S&F MCB, single pole, 5 to 32 Amp, 240V, 10KA.
M&L Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 5 of SSR Part-I conected to earth test point as specified or indicated including testing on completion.
S&F 1100 volts grade heavy duty 10sqmm 2 core flat cableb PVC insulated aluminium stranded conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire withtwo single core cable complete all as specified.
S&F 1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire withtwo single core cable complete all as specified.
S&F 1100 volts grade heavy duty 4 Sqmm 2 core flat cableb PVC insulated aluminium stranded conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire withtwo single core cable complete all as specified.
Supply and fixing LED 18 Watt Tubelight fitting decorative ultra slim square profile linear with extruded polycarbonate environment friendly Make Havells or equivalent
Supply & fix LED building security light 45 watt energy efficient with bracket,suitable dia pipe for fixing the street light in wall all as directed. Make Havells or equivalent
S&F bulb LED 7 watt 230 volts,complete all as specified and as directed.
S&F in replacement of LED Bulb 12 watt. Make Havells or equivalent
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc as specified and directed by Engineer-in-charge.
Supply and laying of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 2 core complete all as specified
M & L River sand, spread dry in trenches as in cable cushioning ,Before laying the cable, the trench shall be provided with a layer of sand of 8 cm depth and the cable has been properly straightened, it shall be covered with sand to a depth of 15 cm , then gently punned down to a depth of 10 cm above the top of the upper-most cable and punning shall be done by hand all as specified and as directed.
Factory made ISI marked un-reinforced precast cement concrete cable cover of PCC 1:1.5:3 type A-1, conforming to class LV, flat of size 250mmx150mmx40mm, laid dry over electric cable for protection all as specified.
M & L for 15mm GI tubing medium grade ISI marked complete with all necessary fittings on wall , floor etc complete all as specified and directed by Engr-in-Charge
M&L for 15 mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge
M&L for 15 mm bore stop valve cast copper alloy chromium plated with crutch or butterfly handle screwed for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge
Note :(i) Deduction for amount of Rs 51974.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract. (ii) Building Works Should be carried out as per TD approved by CELZ.
JP AND CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .