Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹8.7 LAccepted-AOC R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹9.4 L+₹70,514 (8.09%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹11.0 L+₹2.3 L (26.6%)Rejected-Finance 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L-3 | Rejected-Finance Higher side quoted amount |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE KHUMBATHANG
REPAIR AND MAINT OF BR AND EM AVN ASSETS AT KHALTSI IN THE AOR BR-II KHALTSI UNDER GE KHUMBATHANG
2022_MES_560076_1
8051/109/E8
Open Tender
Civil Works
Item Rate
180 days
GE Khumbathang
As per Tender and NIT doc
7 documents required · 7 mandatory
₹500
GE Khumbathang
₹20,000
5 Dec 2022
27 Oct 2022
29 Nov 2022
28 Oct 2022
28 Nov 2022
14 Nov 2022
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed.
S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roof, walls etc with grade of zinc coating 275 complete all as spd and as directed by Engnr-in-charge.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame)exceeding 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.
S&F Aluminium door window frame for door,window / ventilaror/partitions with one or more rebate including joining cleat for fixing etc (for double glazing shutter), complete all as specified and directed
S&F Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (150 mm) 02 Nos in each door, hinges (100 mm ) 03 Nos each door, anodised aluminium snap beading, screws, etc complete all as specified and directed by Engr-in-charge.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
M&L for Prelaminated particle board 9mm thick interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination fixed in aluminum frame complete all asspecified .
S&F sheet glass 4 mm thick ordinary quality n exc 0.5 Sqm in each panes .
S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150 mm aluminium anodised barral tower bolt of extruded section fixed with screws complete all as specified and directed..
Dismantling of wall and ceiling boards (fiber, pulp insulation, etc) or insulation board/ slab/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L 12 mm thick Pre- laminated particle board , interior grade, prelaminated one side with decorative choice lamination & other side balancing white decorative choice lamination & other side balancing white lamination , fixed with nails in wall penelling etc complete all as specified & directed.
M&L for I class softwood moulding as in cornices, rails etc Sectional area not exc 6 sqcm
Dismantling timber scantling under 40 Sqcm on flats, rails, posts, rafter, purlins etc.in unframed work complete all as specified and directed.
M&L for second class soft wood (Kail) plain fillets, rectanglar or triangular in section clean sawn secured with nails exceeding 13 Sq cm and not exceeding 25 Sq cm complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and dirtected by Engr-in-Charge .
M&L for cement concrete type B-1 1:2:4 (20 mm graded aggregate) 150 mm thick as in pavings,hard standing, floor etc, complete all as specified. complete all as specified and dirtected by Engr-in-Charge .
M&L for forming constructionjoint 30 mm dep x 10mm wide filled with sealing compound(grade 'A') complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old painted surfaces of steel of any description , over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge ..
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises
M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match the existing surface laid over 15mm thick avg screed bed in CM 1:4 complete all as specified and directed.
M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of red oxide Zink chrome primer complete all as spd and as directed.
Supply & Laying in replacement of XLPE insulated screened PVC bedded galvanised steel strip armoured electric power heavy duty 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete Trenches/ducts all as specified and directed by Engr-in-charge.
Same as above sl no 26 but of size 70 sqmm 3.5 core complete all as specified and directed by Engr-in-charge.
Excavation in trenches, getting out in hard/dense soil not exceeding 1.5m deep and not exc 1.5m wide for taking out the existing cable of poles etc any size at places complete all as specified and directed.
Removing of surplus soil to a distance not exceeding 50 mtr complete all as specified and deposited where directed at a level not exceeding 1.5m above the starting point all as specified.
Returning filing in including spreading levelling, watering & well ramming in layers not exceeding 25 Cm thick all as specified.
Material & Labour for sand cushioning 15 cm below and 8 cm above the U/G cable laid (total depth of sand shall be 18 cm) complete all as specified & directed by Engr-in-Charge.
M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site.
KASHMIR FAIR DEAL SERVICES
M/S ALI MOHD AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .