RoutineMtce. Of Gulbai Tekra TE building Ahmedabad for a period of four month (January 2026 to April 2026)

Repairing door shutter by chiseling, fixing new screws, hinges etc. for easy smooth operation all complete as per direction of Engineer-in-charge.

Providing and fixing Door stopper including remoing existing broken door stopper all complete as per direction of Engineer in charge.

Proiving and fixing Bib cock (15mm nominal bore) of "Jaquar" or equivalent make including removing existing nonfunctional Bib cock all complete as per direction of Engineer in charge.

Proiving and fixing Stop cock/ angle cock (15mm nominal bore) of "Jaquar" or equivalent make including removing existing nonfunctional Stop cock/ angle cock all complete as per direction of Engineer in charge.

Proiving and fixing Pillar cock (15mm nominal bore) of "Jaquar" or equivalent make including removing existing nonfunctional Pillar cock all complete as per direction of Engineer in charge.

Providing and fixing health faucet with connection pipe all complete as per direction of Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing uplasticised PVC connection pipe with CP brass unions, 60 cm length, 15 mm nominal bore all complete as per direction of engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing SS jali of size 150x150mm for floor trap all complete as per direction of Engineer in charge.

Providing and fixing Mirror of size 2'x1'6" with supporting studs all complete as per direction of Engineer in charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing UPVC (Schedule 80) pipes, including all UPVC plain fittings, including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

Providing and fixing UPVC valve of approved quality :

25 mm nominal bore

40 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal bore

Providing and fixing UPVC (Schedule 80) brass threaded FTA/MTA of size 20mm nominal dia.

Providing and fixing UPVC (Schedule 80) brass threaded FTA/MTA of size 25mm nominal dia.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing 15mm nominal bore PTMT bib cock / stop cock / angle cock of "Prayag" or equivalent make all complete as per direction of Engineer in Charge.

Providing and fixing 15mm nominal bore PTMT pillar cock of "Prayag" or equivalent make all comple as per direction of Engineer in Charge.

Providing and fixing PTMT swivelling shower with 225mm long arm of "Prayag" or equivalent make all complete as per direction of Engineer in Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing SS sliding door bolts with nuts and screws etc. complete :

Providing and fixing SS tower bolt (Barrel type) with necessary screws etc. complete :

Providing and fixing SS handles with necessary screws etc. complete :

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Demolishing brick bat lime / cement concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Dismantling C.I. drainage pipe including removing Tee / Y Tee from wall without damaging the connected NT or P trap of WC and stacking the material within 50 metres lead :

75 mm dia pipe.

100 mm dia pipe

Providing and fixing on wall face unplasticised Rigid PVC drainage pipes conforming to IS : 13592 Type B, including jointing with solvant cement all complete as per direction of Engineer in Charge.

90 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC dainage pipes, jointing with solvant cement and connecting with existing cast iron NT or P trap of WC with cement, Mseal etc. and plugging the hole with cement mortar all complete as per direction of Engineer in Charge

Single tee without door including one coupler

Floor Trap

100mm inlet and 75 mm outlet

Providing and fixing clamps made of MS flat 20x5mm and fixing to wall by Jasti Killa (Nails) for supporting PVC dainage pipes including painting with red oxide paint all complete as per direction of Engineer in Charge

90 mm dia pipes

110 mm dia pipes

Cleaning of Manholes, Floor Traps, Gully Traps and connected sewer/ drainage lines by rodding, passing bamboo strips etc. including removal of sludge, rubbish etc. and disposal of the same all complete as per direction of Engineer-in-charge. (Manholes should be cleaned by mechanical means such as bucket rixa, suction pump etc. and no labour shall be allowed to enter Manholes)

Manhole up to 1.5m deep.

Manhole above 1.5m deep.

Gully Trap

Floor Trap/Nahni Trap

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

25 mm average thickness

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

25 mm average thickness in 2 layers.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Labour charges for engaging Plumber / Carpenter for attending complaints all complete as directed by Enginner-in-charge.

Labour charges for engaging labour for assisting Plumber / Carpenter for attending complaints all complete as directed by Enginner-in-charge.

Providing and fixing 15mm nominal bore brass splinder for bib cock/stop cock/pillar cocks all complete as directed by Enginner-in-charge.

Providing and fixing 25mm nominal bore ceramic splinder for bib cock/stop cock/pillar cock all complete as directed by Enginner-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Connecting 10 nos. toilet pipes of shaft to one common PVC pipe of 160mm at ground level bypassing chocked manhole including making hole in brick wall, breaking cement concrete, making good all damages including all materials involved all complete as directed by Enginner-in-charge.

Connecting 05 nos. toilet pipes of shaft to one common PVC pipe of 160mm at ground level bypassing chocked manhole including making hole in brick wall, breaking cement concrete, making good all damages including all materials involved all complete as directed by Enginner-in-charge.

Deduction for taking over of unserviceable materials obtained from dismantling / demolishing as is where is basis. Note : Materials shall be taken over by the contractor at his own cost and will allow to deduct at the quoted rate from the bill of payment.

15 mm nominal dia. Brass Bib/ stop/ angle cock

G.I. Pipe & fittings.

15mm dia. Pipe

20mm dia. Pipe

25mm dia. Pipe

40mm dia. Pipe

Covering old unused septic tank by green cloth and barricading with pvc jali including all materials involved all complete as directed by Enginner-in-charge.