SPECIAL REPAIR TO BLDG NO. P-471 AT NJ NAIR ENCLAVE OF MH TRIVANDRUM AT PANGODE MIL STN, TRIVANDRUM

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to MES store and including removal of debris from premises etc complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 on concrete surface etc complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.

Taking down cement plaster any description including terrazzo dados & the like on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on brick or concrete surfaces as screed to receive tile finish as in skirting and dados etc complete all as specified and directed.

M&L for coloured ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and as directed.

S&F 15mm bore UPVC pipe pressure rating 10Kgf/Cm² fixed complete to walls, ceiling or in floors etc any type of pipe including taking down existing etc (Up to four storey building) etc complete all as specified and directed.

S&F 20mm bore UPVC pipe pressure rating 10Kgf/Cm² fixed complete to walls, ceiling or in floors etc any type of pipe including taking down existing etc (Up to four storey building) etc complete all as specified and directed.

S&F 25mm bore UPVC pipe pressure rating 10Kgf/Cm² fixed complete to walls, ceiling or in floors etc any type of pipe including taking down existing etc (Up to four storey building) etc complete all as specified and directed.

Dismantling water tanks any type of capacity exceeding 250 litres but not exceeding 500 litres and removing to MES store.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litres etc complete all as specified and directed.

S&F in repair 20 mm dia Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rods and high density ball screwed for iron pipe etc complete all as specified and directed.

S & F in repairs Stop valve cast copper alloy, screwed down, high pressure fancy type chromium plated with long shank and cup (concealed type) screwed both ends for 15mm dia iron pipe or for unions and fixed, etc complete all as specified and directed.

S&F in repairs chromium plated angle cock cast copper alloy, fancy type screwed down, high pressure, screwed both ends for 15mm dia PVC/ iron pipe or for unions and fixed all as specified and directed.

S & F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Bib tap, brass fancy type chromium plated size 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed..

S&F in repairs of PVC valve less, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 Ltrs and connection to pipe complete all as specified and directed.

S&F in repair of vitreous China wash down water closet pan (pedestal pattern) with seat cover, superior fancy type white (excluding flushing cistern and flush type) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage etc all as specified and directed.

S&F in repair brass CP soap dish, single unit to suit the location complete all as specified and directed.

S&F in repair health faucet with push button including flexible PVC pipe with steel lining of 1 Mtr long PVC chromium plated suitable for 15mm pipe complete all as specified and directed.

S&F in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as specified and directed.

S&F in repair towel rail 20 mm dia, D type 60 cm long of brass chromium plated complete all as specified and directed.

S&F stainless steel plate rack of size 90 cm x 78 cm x 23 cm, 1mm thick stainless steel sheet standard pattern complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washer and waste fittings and waste pipe PVC 32/40 mm dia including bedding in cement mortar on dwarf wall or including cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410 mm x 330 mm x 160 mm, etc complete all as specified and directed.

S & F in repairs Pillar taps 15mm dia brass, fancy type with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back size 550mm x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, making good, etc complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32 mm dia including PVC waste pipe , for wash hand basin with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and removing old trap and making good all as specified and directed.

Taking down chowkats with shutters (without taking off shutters) area exceeding 1.5 Sqm but not exceeding 4.00 Sqm

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of any description not exceeding 1.50 Sqm each.

Taking down shutters of any description exceeding 1 Sq. m each and not exceeding 2.0 Sqm

S&F of 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, etc complete all as specified and directed.

S&F mild steel flat iron hold fast, embedded in concrete etc complete all as specified and directed

M&L for treating small articles with tar or coal tar black paint such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exceeding 0.1 Sq. m each etc complete all as specified and directed.

M&L providing, cement concrete 1:3:6, type C1 using 20mm graded aggregate for bed block, lintels upto 1.5m clear span, cills, steps seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, including necessary form work etc complete all as specified and directed.

S&F for 35 mm thick 2nd class hardwood plain framed , panelled shutters (any number of panels) with panels of timber flat on both sides (feathered edged) or of veneered particle board medium density , wood particle board with commercial face veneers supplied and fitted to chowkats etc complete all as specified and directed.

S&F of 35mm thick 2nd class hardwood glazed skelton shutters open rebated and prepared to receive glass/ gauge etc and rebated sash bar any number divided into squares, with plain chamfered or rounded, mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8,clause 8.24 (a) etc complete all as specified and directed.

S&F 2nd class hardwood glazed skelton shutters 30 mm thick for windows and ventilators open rebated and prepared to receive glass/ gauge etc and rebated sash bar any number divided into squares, with plain chamfered or rounded, mitred beads for securing glass etc; sizes of members of shutters in SSR Part-I, section 8, clause 8.24 (a), fixed to chowkats etc complete all as specified and directed.

M&L for 2nd class hardwood Plain fillets, square, rectangular or triangular in section cross section exceeding 13 Sqcm & not exceeding 25 Sqcm, clean sawn, secured with nails or brads for fixing wooden cupboard shutters etc complete all as specified and directed.

M&L for 18/ 19 mm thick prelaminated particle board , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws etc complete all as specified and directed.

S & F Extruded anodised aluminium alloy handle 75 mm fancy type

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) 40 mm

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of prink primer etc complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt size 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F size 100mm butt hinges, Medium weight, cold rolled mild steel, and fixed.

S&F 150mm aluminium anodised handles, cast type.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

S&F in repairs mild steel butt hinges medium weight cold rolled of size 100mm complete all as directed.

S&F in repair 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 150mm aluminium anodised handles, cast type

S&F in repair Aluminium alloy, anodised,sliding door bolt size 250mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21.

S&F 125mm extruded aluminium alloy handles fabricated type anodised.

S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with steel staple or wooden bead.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone concrete or bricks surrounds glazed with putty or fixed with beads.

Hacking out old broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins and providing and fixing new ones.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane complete.

S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane complete.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of concrete/ brick surfaces finished fair and smooth without using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of concrete/ brick surfaces finished fair and smooth without using extra cement etc complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling finished fair and smooth without using extra cement (Upto four storey building) etc complete all as specified and directed.

M & L for applying two coats of oil bound distemper over one coat of primer including preparation of new plastered surfaces on ceiling complete (Upto four storey building) etc complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on preparation of new plaster surfaces on walls complete etc complete all as specified and directed.

M&L for applying two coat of acrylic exterior emulsion water proofing painting on surfaces evenly on new plastered externals walls including priming coat (up to four storey bldg) as per manufactures instructions ) etc complete all as specified and directed.

S&F in repairs of 100mm size hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws.

M&L for salt glazed stone ware gully traps square or rounded mouthed tape & fix 100 x 100 mm fixed in cement concrete etc complete all as specified and directed.

M&L for 100 mm thickness cement concrete work in pavement/ hard standing of 1:2:4 (Type B-2 using 40 mm grade crushed stone aggregate) of concrete with brooming finish etc complete all as specified and directed.

M & L for forming 12 mm thick expansion joints for 100 mm concrete slab thickness filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade A etc complete all as specified and directed.

Roughening of surfaces of old concrete surfaces including damaged tar felt by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 Kg of cement per Sq metre.

Demolition of cement concrete (un-reinforced) in roofs, floor (other than ground floors) beams, staircase , landings , chajjas and similar suspended work.

M&L for 25 mm thick PCC 1:2:4 type B1 with 20 mm graded granite stone aggregate on RCC roof all as specified and directed

M&L for rendering in CM 1:3, 10 mm thick mixed water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement etc complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

Supply only Integral Water Proofing Compound.

Material and labour for 4 mm thick APP modified prefabricated five layer water proofing membrane reinforced with non-woven polyester matt black, weighing not less than 4.80 Kg/ Sqm shall be laid over compatible primer at 0.40 Litre/ Sqm of density 25 degree centigrade 0.87-0.89 Kg/ Litre and viscosity 70-160 cps on cold sticker and torch application of membrane with 10 cm overlap and 15 cm end laps over a coat of bituminous emulsion @ 100gms / Sqm on planted surface and hot blown bitumen 85 /25 grade @ 1.20 Kg/ Sqm and finishing with solar reflective bituminous aluminium paint applied 100 Gms/ Sqm etc complete all as specified and directed.

S & F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls (Upto four storey building) and making good plaster/brick work/ RCC surfaces surrounding the PVC drain water pipe and applying exterior wall paint to match the existing surfaces etc complete all as specified and directed.

S & F in repair PVC (SWR) bends in any radius 110 mm dia all as specified.

S & F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls (Upto four storey building) and making good plaster/brick work/RCC surfaces surrounding the PVC drain water pipe and applying exterior wall paint to match the existing surfaces etc complete all as specified and directed.

S & F in repair PVC (SWR) bends in any radius 75 mm dia etc complete all as specified and directed.

S&F for MS rolled steel 16mm dia, Fe-410W (Gde-E-250) quality-B as in window guard bars etc complete all as specified and directed.

M&L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth with applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and directed.

M&L for PCC type B1 1:2:4 ( 20 mm graded aggregates) in kerbs or mud stops rounded or chamfered edges etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing, or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and directed.

Disconnecting existing tanks exceeding 250 Ltrs & not exceeding 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar.

M&L pre-cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exceeding 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 ( using 20 mm graded aggregate) in , copings, haunching and benching the like including weathering, slightly rounded or chamfered angles and throating and as directed etc complete all as specified and directed.

S&F in repair stack clamps 50mm by 5mm flat iron round including bolts and nuts for fixing of pipe any size dia upto 110mm and securing ends of stays to wall etc complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (tabled rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including edges grinding and polishing etc complete all as specified and directed.

Rounding to edges of granite stone slabs on edge, such as in steps, cooking platform and other similar works.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L precast cement concrete type B1, 1:2:4 type B1 (20mm graded aggregate) as in manhole / gully trap cover slab including use and waste of necessary formwork set in CM 1:4 etc complete all as specified and directed.

M&L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars etc complete all as specified and directed.

S&F PVC (SWR) Pipe single socketed, in any length with rubber ring joints laid in trenches or in floors 100/ 110 mm dia bore of pipe including fittings , ISI marked etc complete all as specified and directed.

S&F PVC (SWR) Pipe single socketed, in any length with rubber ring joints laid in trenches or in floors 150/ 160 mm dia bore of pipe including fittings , ISI marked etc complete all as specified and directed.

M&L for concrete bed for drain pipes 100/ 110 mm dia including forming cradles by using PCC (1:3:6) type C2 using 40 mm graded aggregate including packing under and haunching against the sides of pipe after they are laid and tested etc complete all as specified and directed.

M&L for concrete bed for drain pipes 150/ 160 mm dia including forming cradles by using PCC (1:3:6) type C2 using 40 mm graded aggregate including packing under and haunching against the sides of pipe after they are laid and tested etc complete all as specified and directed.

Cutting into existing manhole for connecting new drain, making good pipe and rending cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100 mm/ 110 mm / 160mm dia etc complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 100/ 110 mm dia.

S&F in repair PVC (SWR) branch piece, (Single Y or T ) equal or un-equal 110mm dia of pipe.

S&F in repair PVC (SWR) branch piece, (Single Y or T ) equal or un-equal 75mm dia of pipe.

S&F in repair PVC (SWR) bend with access door 75 mm dia.

S&F in repair PVC (SWR) bend with access door 110 mm dia.

M&L for preparing old surfaces of wall and applying two coats of oil bound distemper over a coat of primer including complete removal of existing treatment etc complete all as specified and directed.

M&L for applying one coat of acrylic exterior emulsion water proofing painting including preparation of old surfaces of wall (up to four storey bldg) as per manufactures instructions etc complete all as specified and directed.

M&L brooming down and preparing old surfaces of ceiling and applying one coat of oil bound distemper etc complete all as specified and directed.

M&L preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto four storey building) etc complete all as specified and directed.

M&L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth shall include removing all splashes , drops dirt etc and leaving premises in the clean state applying one coat of synthetic enamel paint all as specified. (up to four storey building) etc complete all as specified and directed.

S&F PVC ventilator fixed type with solid frame 45 mmx70 mm including louvers frosted glass of size 3 mm thick including MS guard bar of 10 mm dia spacing 150 C/C and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with PVC beading ,painting to steel surfaces including taking down the existing PVC ventilator etc complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub-base all as specified etc complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:6 for laying floor finishes etc complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigments, set, jointed and pointed in near cement slurry completed etc complete all as specified and directed.

Cutting/ cleaning small trees, saplings, shrubs and under growth complete roots from brick walls, chajjas etc including taking out complete roots from inside walls/ chajjas and making good surfaces in cement concrete 1:2:4 type B1 or in cement mortar (1:4) to match the existing surfaces all as specified (Upto four storey building) etc complete all as specified and directed.

Cutting holes not exceeding 150 Sqm into or through brick walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc. complete

M & L for Point wiring complete for One light point controlled by one switch with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metallic PVC conduit including accessories partly concealed in wall and in PVC casing capping in ceiling beam with pressed steel terminal boxes of suitable size & modules, concealed in walls including plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches/sockets/regulators etc, including provision of 1.5 Sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly etc complete all as specified and directed.

Description all as per ser item No. 121 here-in-before but for One fan point controlled by one way switch and regulator.

Description all as per ser item No. 121 here-in-before but for One bell/ buzzer point controlled by one bell push button independent.

Description all as per ser item No. 121 here-in-before but for one 5 Amps outlet on same board with other switches/ sockets.

Description all as per ser item No. 121 here-in-before but for one 5 Amps socket outlet on independent board.

Description all as per ser item No. 121 here-in-before but point wiring with 4 Sqmm FRLS cable and 4 Sqmm cable earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board.

S&F switch piano, flush type, single pole, one way 5 Amp, 240 Volts, white or ivory ISI marked complete

S&F bell push, flush type, single pole, one way, 5 Amps, 240 Volts etc complete all as specified and directed.

M&L for stepped type electronic fan regulator, flush type 240 Volts, 50 Hz, suitable for ceiling fan any sweep etc complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 volts, ISI marked etc complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin, 5/15 Amps flush type, universal, 240 volts, ISI marked etc complete all as specified and directed.

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal etc complete all as specified and directed.

S&F lamp holder angular type, PVC/Polycarbonate type with back plate incl LED lamp 7 W etc complete all as specified and directed.

S&F buzzer, Ding Dong, AC, 240 Volts, single pole etc complete all as specified and directed.

M&L for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 6 way, 415 Volts grade with insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TP/SPN/SP etc, including taking down existing unserviceable one and removing from site etc complete all as specified and directed.

S&F in replacement of MCCB triple pole and neutral (four pole) 100 Amp, 415 Volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete

Supply and fix sheet metal enclosure double door powder painted for MCB DB SPN 8 way with din rail and bus bar including making good to the disturbed surface matching with the existing etc complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning and taking down old unserviceable one from the site etc complete all as specified and directed.

Description all as per ser item No. 138 here-in-before but for MCB SP 40 Amps.

Description all as per ser item No. 138 here-in-before but for MCB SPN 32 Amps.

Supply and fix sub-main wiring with 2 runs of 6 Sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit with all fitting such as Tee, Bends, Elbow, etc., fixed surface on wall/ ceiling including 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly etc complete all as specified and directed. Note : 2 runs of 6 Sqmm single core PVC insulated cable, 1 run of 6 sqmm insulated earth continuity cable and 1 run of PVC conduit shall be measured as 1 unit running meter

M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground with earth pit not less than 2.25 metre deep below normal ground level with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised 4 mm dia earth lead wire by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type C1, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar funnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/ loose soil complete all as shown in electrical plate No. 3 of SSR Part-I 2009 including testing on completion and taking down old earthing etc complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 Watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed.

S&F Smart Extruded Aluminium LED batten (4 feet) with higher efficacy. Microwave sensor to save more energy reduces the light intensity by 70% during non-occupancy connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make-Bajaj Model No. BCLAB20WLEDPS/or equivalent make listed in PS etc complete all as specified and directed.

S&F LED light fitting 1x10 Watts bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed.

Taking down carefully serviceable ceiling fan by disconnecting from ceiling rose etc and keeping in safe custody. Refix, hanging only ceiling fan after proper cleaning, servicing etc and connecting up with three core wires from ceiling rose including testing etc complete all as specified and directed.

Taking down carefully existing serviceable exhaust fan, ceiling cable end, etc., removing the fan for keeping in safe custody, refixing the exhaust fan connecting up including making electric connection from ceiling rose/ connector and testing etc complete all as specified and directed.

AKASH CONSTRUCTIONS

DJ GROUP

mahadeva traders cotractor and suppliers

SHILPA ENGINEERS AND CONTRACTORS