Renovation work of Utkalika Showroom at Sector-5, Rourkela

Amount

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C (1:4:8) with 40mm size metal including cost,conveyance,royality etc complete as directed by the Engineer-in-charge.

Fixing Vitrified tiles in floors 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing Granite Slab in floors (Verandah) on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Distempering wall painting two coats with 100 % acrylic emulsion paint (1st quality) grade of approved make & shade manufactured by reputed manufacture like NEROLAC/ASIAN/BERGER/DULOX or equivalent to make an even finished surface over required putty & 2 coat of primmer with water bond cement primer in all heights with all scaffolding and staging charges including cost,conveyance,taxes of all materials,cost of all labours, T & P ,sundries etc,as required for the work complete as direction of Engineer-in-charge.

Two coats weather coats with 100% acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC/ASIAN/BERGER/DULOX or equivalent to make an even finished surface over required putty & 2 coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost,conveyance,taxes of all materials,cost of all labours, T & P,sundries etc.as required for the work complete as direction of Engineer-in-charge.

Repapiring of shutter & colapsable gate size and colour both side and wall including writing charges complete in all respect with labour and materials complete as direction of Engineer-in-charge.

S/F/F of S.Steel railing (304 grade) in 3 rows (2" dia one row niddle 3/4" dia in row) with required balustrade & newel post complete as direction of Engineer-in-charge.

Painting two coats of enamel paint over a coat of priming including all costs of labour,paint,primer,brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

25mm grading in C.C (1:2:2) using 4.7 mm size hbg cleaned bajri(Down graded chips) mixed with water proof compound etc complete as direction of Engineer-in-charge.

Dismetaling the showroom and deposit the garbage to the dumping yard as direction of Engineer-in-charge.

INTERIOR WORK

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape with 2 coats of plastic emulsion paint over suitable primer of Berger/ Asian paint make including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

Alliuminium composite Panel with alluminum frame work covering with 3mm exterior grade of approved make finished in all respect with cost of all materials, labour, scafolding etc complete as per direction of Engineer in-charge.

Providing and fixing Storage racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam-code 693,5375,777) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Providing and fixing 750mm width X 900mm height Sales cum display counters with side support made up of 19mm ply, 12mm glass table top, side glass and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 0.8mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge. (Greenlam-code-693,5375,777)

Providing and fixing in proper position, curved shape Cash Counter of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Providing furniture of reputed company to showroom as per approved design as directed by Engineer-in-charge

Providing fitting and fixing high back executive chair,Pedestral base is chrome finish with 5 wheels,Arm material os proypylene,seat material is PU foam covered with pure leatherite,material of back cover/back rest is leatherite and cental tilt. Overall chair height is 1200 mm ,backrest height is 730mm ,back rest width is 480mm,seat height 450mm,seat width is 480 mm complete as directed by EIC.

Providing, fitting and fixing in customer visitor chairs. Material used is hot pressed board.seat and back rest is padded with polyurethene foam.material of fabric back cover is leatrher.frame material is stainless steel as per direction of Eingineer-in-charge.

P/F/F. of 12 mm toughened glass door with Patch fitting & swing door with locking arrangement in patchfittings as well as ss 40mm dia, and approx.600 mm long approved etc complete as per direction of Engineer in-charge.

Providing of stickering of handloom motives in large size vinyl stickering to frontage of showroom approved etc complete as per direction of Engineer in-charge.

ELECTRICAL WORK

Supply of all required materials and recessed(concealed) wiring to proposed light points/fan/exhaust fan/call bell points with 2(1x1.5sqm.) PVC insulated 1000v grade FRLS copper were run inside 19 mm PVC conduit pipe of 14 SWG or flexible conduit pipe laid on surface concealed in wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS copper were as earth continuity conductor fixing of 6A-240V modular type switch and complete in all respect including with use of clip-in- type modular plates, boxed, switches, ceiling roses, junction boxes with Bakelite cover as specified and making good to the damages caused and complete as per direction of EIC.

Primary light points

Secondary light points

Supply of all required materials & recessed wiring to 2/3 pin clip-in modular type 5 AMP plug socket points with 2(1x2.5 sqmm) PVC insulated 1100 V grade standed single core FRLS copper wire run inside 19mm PVC conduict (14SWG) pipe laid concealed in surface wall/ceiling 1(1X1.5 SQM) PVC insulated FRLS Copper wire as earth conti8nuty conductor and complete in all respect including 5pin 5A sockets switches,plates,boxes and cover as specifed and making good to the damages caused and complete with all respect as per the direction of Engineer-in-charge.

Separator

Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. MAKE:FINOLEX / V GUARD / POLYCAB / HAVELLS

2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).

2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

Supply, delivery, installation, testing & commissioning of L.T. Indoor Wall mounted Double Door type Distribution Boards of Original Factory made enclosures of the same Brand as the MCB conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the Direction of Engineer-In-Charge. MAKE: LEGRAND / L& T/ HAGGER

Supply, delivery, installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: CG/ PHILIPS/ JAQUAR/BAJAJ

36/18 watt LED of approved make (Jaguar/Philips)

30 watt Track Light

3W Round recess mounted swivel spot light with beam angle 30 degree LED down light 6000 cct (k) fixtures similar to Crompton Cat No-LGSR-07-W or Equivalent.

LED Strip light complete set MAKE: philips/crompton

Supply, delivery, installation and testing commissioning of 2 ton capacity celling mounted cassette AC of approved make with all required fitting complete as directed by Engineer-in-charge.

Providing & fixing of 1 nos 2000 VA Inverter of any reputed make like USHA/Microteck etc including Exide make battery of required capacity and its accessories complete as directed by Engineer-in-charge.

Providing & fixing of 5KVA Voltage Stabilzer of any reputed according to requirment of the site complete as directed by Engineer-in-charge.

Providing fitting & fixing of Sainage/LED sign board with raised acrylic sheet lettering as per approved design with cost of labour & materials complete as directed by Engineer-in-charge.

Providing fitting fixing of 150 watt/400 watt metal halide with cost of materials,fixtures and labour complete as directed by Engineer-in-charge.

C.C.CAMERA

16 Channel Real Time Standalone DVR with D1 Resolution on all 16 Channels @400tps, HDMI Port, lH264 Hardware Compression, with 16 video inputs, capacity for installing 2 SATA Hard disks, back up through Disk array and USB Network support with static and dynamic IP. Real time viewing make Crystal.

Night vision camera with 1/3" Sony Super HAD CCD,1000 TVL resolution,1.5 IR LED,15 Mtr range,3.6m IR lens dome Camera make Crystal

Samsung LED Monitor 22”

System installation, testing and commissioning charges

MUSIC SYSTEM

Providing music system to the showroom including speakers

Odinix High Quality 6 watts 103mm dia Ceiling speakers

Ahuja 160 watts Amplifier with Remote and USB Port

Volume Control 6 watt

System installation, testing and commissioning charges

Provision for fire extinguishers of approved make to be placed in required position as directed by Engineer-in-charge.

ABHISHEK KALIPRASANNA PUHAN