GENERAL-Lift Irrigation Special Repair Works-Maintenance of LIS 2022-23 Urgent replacement of old damaged MS Pipes and Accessories under electrical Lift Irrigation section Ramamangalam

Amount

MS Pipe work at Ramamangalam NO:1 LIS

OD168007/2022-2023:Dismantling the existing MS Suction pipe of size 300 mm piece by piece after providing scaffolding supports, with out further damages including MS bent , accessories etc. and stacking at the yard

OD168006/2022-2023:Supply, conveying, erecting, testing and commissioning the 300 mm dia MS pipe in suction side having sheet thickness 6 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading,etc.

OD168005/2022-2023:Supply and providing the rough cut flange ring joint 12 mm depth for 300 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

MS Pipe work at Kalamboor North LIS

OD166471/2022-2023:Dismantling the existing MS Suction pipe of size 200/250 mm piece by piece after providing scaffolding supports, with out further damages including MS bent , accessories etc. and stacking at the yard

OD166470/2022-2023:Supply, conveying, erecting, testing and commissioning the 200 mm dia MS pipe in suction side having sheet thickness 6 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading, etc.

OD166472/2022-2023:Supply and providing the rough cut flange ring joint 12 mm depth for 200 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

MS Pipe work at Ramamangalam NO:4 LIS

OD167969/2022-2023: Demolishing the concrete support surrounding the 350 mm MS delivery pipe using suitable concrete cutter for MS Pipe removal.

OD167937/2022-2023:Dismantling the existing MS delivery pipe of size 350 mm piece by piece after providing scaffolding supports, with out further damages and stacking at the yard as per the directions of departmental staff at site.

OD167905/2022-2023:Supply, conveying, erecting, testing and commissioning the 350 mm dia MS pipe in delivery side having sheet thickness 6 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading,etc.

OD167904/2022-2023:Supply and providing the rough cut flange ring joint 12 mm depth for 350 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

MS Pipe work at Kaliyar Pindikayam LI Scheme

OD66204/2022-2023:Dismantling the existing MS Suction pipe reducer 400*350 mm size after providing scaffolding supports, with out further damages. and stacking at the yard

OD66203/2022-2023:Supply, fabrication, fixing & Testing of 400 x 350 mm size or nearest size 0.45 Mtr long MS pipe reducer having 6 mm sheet thickness facing the cutting edges, with suitable Rubber packing, bolt nut etc, correcting pipe alignment, making leak proof, air tight and painting two coats of synthetic enamel paint over a coat of red oxide primer, including suitable flanges at both ends, etc complete.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

MS Pipe work at Karukapilly LIS

OD166439/2022-2023:Dismantling the existing MS pipe Bend of size 350 mm in suction side after providing sufficient scaffolding supports and stacking at the yard without damaginging the existing suction pipe line as per the directions of departmental staff at site.

OD166438/2022-2023:Supply, fabrication, conveyance, fixing, testing and commissioning of 350 mm size MS pipe bend with 12 mm thick flanges at both end, fabricated from 350 mm MS pipe having 6 mm sheet thickness, with length not less than 1 meter, painting two coats of synthetic enamel paint over a coat of red oxide primer.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

MS Pipe work at Pampakkuda Relift LIS

OD189203/2022-2023: Demolishing the concrete support surrounding the 350 mm MS delivery pipe using suitable concrete cutter for MS Pipe removal.

OD168154/2022-2023:Dismantling the existing MS delivery pipe of size 350 mm piece by piece after providing scaffolding supports, with out further damages and stacking at the yard as per the directions of departmental staff at site

OD168153/2022-2023:Supply, conveying, erecting, testing and commissioning the 350 mm dia MS pipe in delivery side having sheet thickness 6 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading,etc.

OD168152/2022-2023:Supply and providing the rough cut flange ring joint 12 mm depth for 350 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

MS Pipe work at Kakkad Tail End LIS

OD168185/2022-2023:Dismantling the existing MS suction pipe bend of size 250 mm after providing sufficient scaffolding supports, with out further damages and stacking at the yard as per the directions of departmental staff at site

OD168186/2022-2023:Supply, fabrication, conveyance, fixing, testing and commissioning of 250 mm size MS pipe bend with 12 mm thick flanges at both end, fabricated from 250 mm MS pipe having 6 mm sheet thickness, with length 1 meter, painting two coats of synthetic enamel paint over a coat of red oxide primer.

SALAM.T.K

Bidder Name

SALAM.T.K

BALAKRISHNAN P G