Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.8 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹62.5 L+₹1.7 L (2.76%)Rejected-Finance HOUSE NO 206 GALI NO 4 GAUPURI OPP GAUSHALA PHATAK GHAZIABAD UP 201009 | GHAZIABAD | UTTAR PRADESH | 201009 | L2 | Rejected-Finance Not lowest |
Tender Value
₹63.6 L
EMD Value
₹1.2 L
Closing Date
12 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) AMBALA
HQ CWE (AF) Ambala Cantt-133001
PROVN OF PROJECT OFFICE FOR TWO SUB DIVS OF GE (P) (AF) AT AFS AMBALA UNDER GE (P) (AF) AMBALA
2024_MES_647281_1
CWE/AF AMB/AMB-81/2023-24
Open Tender
Civil Works
Item Rate
180 days
AMBALA CANTT
For MES enlisted contractor Class C Category a (i) and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹1,000
GE (P) (AF) AMBALA
₹1.2 L
Yes
28 Jun 2024
20 Mar 2024
14 May 2024
20 Mar 2024
12 May 2024
29 Apr 2024
20 Mar 2024 - 4 Apr 2024
Amount
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed.
Surface excavation, n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified & directed.
Excavating in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified & directed
Excavating in trenches, n exc 1.5 mtr wide and exc 1.5 mtr but n exc 3.0 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5 mtr but n exc 3.0 mtr in depth and getting out in soft/loose soil complete all as specified & directed.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exc 25 cm each in soft/loose soil, complete all as specified & directed.
Removing excavated soil n exc. 50 mtr and depositing where directed at a level n exc. 1.5 mtr above the starting point, complete all as specified & directed.
M&L for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed.
M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.
M&L for mild steel TMT bars of 5mm dia and over upto and incluidng 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, fdn beams. Plinth beams, bases of columns etc, basement slabs, under reamed piles and mass concrete, complete all as specified & directed.
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in beams. Cantilevers, bressumers, lintels over 1.5m span, complete all as specified & directed.
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified & directed.
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.
M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in chajjas, complete all as specified & directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gm/sqm) land on primed surface by forced application, complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), modular bricks, Designation 75, straight or curved on plan exceeding 6mtr mean radius, built in cement mortar 1:6 complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), modular bricks, Designation 75, straight or curved on plan exceeding 6mtr mean radius, built in cement mortar 1:4 complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), modular bricks, designation 75, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified & directed.
M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) in copings, and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & directed.
M&L for precast cement concrete type A 1, 1:1 1/2:3 (using 20mm graded crushed stone aggregates) set in CM 1 : 4, in landings, cover slabs (for manholes etc), and similar work, complete all as specified & directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished flat surfaces, complete all as specified & directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished flat surfaces, complete all as specified & directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, rough finished flat surfaces, complete all as specified & directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces, complete all as specified & directed.
M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work not exceeding 20cm wide, fair finished surfaces, complete all as specified & directed.
M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished flat surfaces complete all as specified & directed.
M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified & directed.
M&L for rendering 15mm thick in CM 1:4 with water proofing compound, on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified & directed. (WPC will be measured separately).
Supply only integral water proofing compound, complete all as specified & directed.
M&L for rendering 5mm thick in CM 1:3 on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, in ceiling complete all as specified & directed.
M&L for hardcore of broken stones or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick each, watered and rammed to a true surface complete all as specified & directed.
M&L for 100mm thick cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in sub base of floors, complete all as specified & directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in base of floors, complete all as specified & directed.
M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes, complete all as specified & directed.
M&L for Double charged vitrified ceramic tiles 9-10mm thick of size 800x800mm, polished, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick, polished,of size 300x300mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed.
M&L for coloured glazed ceramic tiles in vertical surfaces 300x600x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed.
M&L for granite black 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,complete all as specified & directed.
M&L for 20mm thick Granite black machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified & directed.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified & directed.
S&F Powder coated aluminum sliding window/Ventilator (Bombay sliding window) made out of hollow extruded aluminum sections as mentioned below and glazed with tinted glass 4 mm thick fixed with glazing clips, rubber beading /gasket anodized aluminum beading screws and lock type handles of size 75 mm 2 Nos aluminum tower bolts 150 mm long etc complete all as specified & directed. (i) Shutter top & bottom size : 101.60 x 44.45 x 1.5 mm thick. (ii)Shutter inner lock size 37.50x 15x 1.50 mm (iii) Shutter side (handle) size 37.50x15x1.36 mm (iv) Chowkat Bottom : Size : 50.30x26x1.20mm (v) Chowkat top & sides : size : 50.30x15x1.00 mm
S&F Powder coated aluminum door made from hollow extruded aluminum sections as mentioned below. Each door having 02 Nos disc or D type handles, 02 Nos aluminum tower bolts 200 mm size, one brass mortice lock of six levers of Godrej make with key in duplicate to be fixed with aluminum hinges to the chowkhat shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminum beading screws complete all as specified & directed. (i) Chowkhat frame: 101.60x44.45x1.5mm thick. (ii) Shutter vertical/stile: 83.50x44.45x1.50mm thick. (iii) Shutter middle rail : 83.50x44.45x1.5mm thick.
M&L 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified & directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified & directed.
S&F 100mm long butt hinges, mild steel Medium weight, cold rolled and fixed, complete all as specified & directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified & directed.
S&F aluminium (die cast) body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified & directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications and drawings, complete all as specified & directed.
S&F factory made solid panel PVC door shutters 30mm thick (stiles), consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colout PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PV sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in frame at site as per specifications and drawings.
S&F Aluminium powder coated moulded designer grill, Decogrill, pattern or any other pattern or design as approved by GE, fixed with aluminium window frames as per manufacturer's instructions, complete all as specified & directed.
M&L for 50mm thick cement concrete type 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, complete all as specified & directed.
M&L for preparation of new or previously untreated plastered surfaces and applying two coats of acrylic emulsion paint over a coat of synthetic primer of similar make over a coat of minimum 1 mm thick putty including sand papering to achieve even and smooth surface, complete all as specified & directed.
M&L for preparation of new or previously untreated plastered surfaces and applying two coats of acrylic over a coat of synthetic primer of similar make emulsion on ceiling, complete all as specified & directed.
M&L for preparation of new or previously untreated plastered or concrete surfaces and applying two coats of weather proof exterior acrylic emulsion paint over one coat of acrylic primer of similar make over a coat of minimum 1 mm thick exterior water proof putty to obtain even and smooth surface, complete all as specified & directed.
M&L for 40mm thick brick tiles laid on cement mortar (1:6) 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil, complete all as specified & directed.
S&F curtain rod, stainless steel 25mm dia, with fixing brackets and caps etc, complete all as specified & directed.
S&F rotational moulded polyethylene(PVC) water storage tank, HDPE, triple layered , cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 litre and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gram) complete all as specified & directed.
S&F vitreous china wash down water closet pan (pedestal pattern) size 530mm x 385mm x 390mm, white (excluding fixing bolts, flushing systern and flush pipe) and PVC SWR 'P' or 'S' trap 125/110mm bore including connection to drain or out going pipe and to flushing pipe with plastic water closet seat , closed pattern , flat bottom and cover including MS CP hinges etc. complete all as specified & directed.
S&F vitreous china wash basin, white, flatback, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified & directed.
S&F vitreous china urinal, white, half stall type excluding flushing cistern, flush pipe and waste pipe, including providing and fixing plugs, bedding urinal against wall in cment mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (esclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified & directed.
S&F 10 Litres PVC valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, and connection to pipes and fixing chain or pull or lever, if any, complete all as specified & directed.
M&L for 20mm dia steel water tubing medium grade, galvanised with all fittings, laid in floors or fixed to walls and ceilings , complete all as specified & directed.
M&L for 15mm dia steel water tubing medium grade, galvanised with all fittings, laid in floors or fixed to walls and ceilings , complete all as specified & directed.
S&F 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified & directed.
S&F 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified & directed.
S&F 15mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed.
S&F PVC connections 15mm size with PTMT nuts of length 300mm, complete all as specified & directed.
S&F grating dome 100mm dia of PTMT (minimum weight 25 gms), complete all as specified & directed.
S&F grating dome 125mm dia with waste hole of PTMT (minimum weight 25 gms), complete all as specified & directed.
S&F Reinforced concrete pipes, class NP2, 200mm dia, laid and jointed complete with collar, complete all as specified & directed.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified & directed.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified & directed.
S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified & directed.
S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified & directed.
M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2, for 200mm bore pipes, complete all as specified & directed.
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing with solvent cement, complete all as specified & directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified & directed.
S&F 110mmx75mm dia PVC (SWR) reducers, complete all as specified & directed.
S&F 75mm dia PVC (SWR) vent cowl, complete all as specified & directed.
S&F 75mm dia stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid over sand cushioning 25mm thick and joints filled with fine sand, complete all as specified & directed. (Sand cushoining will be measured and paid separately).
M&L for sand cushioning of 25mm thick, complete all as specified & directed.
M&L for providing, cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified & directed.
M&L for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 mtr high from base, complete all as specified & directed.
Supply only earth free from dust , pebbles and stone particles,from outside defence land including transportation, complete all as specified & directed.
S&F for 10 mm thick toughen tinted glass door including 300 mm long stainless steel handle 02 Nos, floor mounted door closer and locking arrangement including all fittings and fixture complete all as specified & directed.
M&L for precast cement concrete louvres and jallies,45mm thick set in CM 1:4 , type B-0,1:2:4 (12.5mm graded aggregate),including all mouldings but excluding frame
M&L for point wiring with 1.5 sqmm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through and including concealed PVC conduit medium grade all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes modular type covered for mounting of modular switches, sockets and fan regulators etc. as per site requirement complete all as specified & directed.
One light /bell /Exhaust fan/Fan Point controlled by one switch
One 3 pin 6 Amps socket point controlled by one switch on same board
One 3 pin 6 Amps socket point controlled by one switch on independent board
Description all as per BOQ item No. 89.00 here-in-before but for one 15/16 Amps switch socket combination on independent board with 2.5 sqmm cables for phase and neutral and 2.5 sqmm cable green in colour as earth continuity conductor.
S&F Modular switch one way 1 Module 6 Amps, complete all as specified & directed.
S&F Modular switch one way 1 Module 16 Amps, complete all as specified & directed.
S&F Modular bell push 6 Amp , 1 Module, ,240 Volts ISI marked complete.
S&F Modular socket 6 Amp 2/3 Pin combined 2 Module, complete all as specified & directed.
Supply & Fix Modular type fan regulator 120W 2 Module, complete all as specified & directed.
S&F of Bell multi music type, 230V, AC, complete all as specified & directed.
S&F Ceiling rose, 3 terminal, PVC/ polycarbonate insulated body, complete all as specified & directed.
S&F Modular socket 16 Amp 2/3 Pin combined 2 Module, complete all as specified & directed.
S&F sheet metal enclosure single pole & neutral with a two pin & earth plug socket complete with & including one single pole MCB 240 volt, 20 Amp complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 1 Module, complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 2 Module, complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 3 Module, complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 4 Module, complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 6 Module, complete all as specified & directed.
S&F Modular white cover plate for Modular switch and socket with frame for 8 Module, complete all as specified & directed.
S&F LED light fitting mirror type with high diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed.
S&F LED surface mounted 2X2 backlit LED panel having white CRCA body, high quality PMMA diffuser 24 watt 5700K CCT including mounting & fixing accessories and connecting up with three core flexible copper conductor cable of suitable size with flexible conduit complete all as specifed & directed. Make: Catpart No. PCGLLS 2X2 24 57 of Polycab or equivalent in Havells / Phillip / Crompton
S&F LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specifed and directed.
S&F of GI Pipe Bracket made out of Galvanised Iron Tubing 25 mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Security Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over one coat of primer complete all as specified & directed.
S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including connecting up with three core flexible copper conductor cable of suitable size with flexible conduit complete all as specifed & directed.
S&F ceiling fans, complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. Min air delievery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable of suitable size with flexible conduit complete all as specifed & directed.
M&L for concealed sub main wiring 2 Run of single core, 6 sqmm, FRLS, PVC insulated and unsheathed, mult stranded copper conductor cable FRLS (Using colour code as per IS) with and including 6 sqmm FRLS PVC insulated and unsheathed copper conductor multstranded cable (Using colour code as per IS) connected to common earth dolly drawn through concealed PVC rigid conduit of suitable size, heavy grade (ISI Marked) having thickness not less than 1.8 mm with all and including all accessories, complete all as specified & directed. Note : Two Runs of single core cable with 1 run of earth cable and PVC conduit shall be measured as one Unit
M&L for concealed sub main wiring 2 Run of single core, 4 sqmm, FRLS, PVC insulated and unsheathed, mult stranded copper conductor cable FRLS (Using colour code as per IS) with and including 4 sqmm FRLS PVC insulated and unsheathed copper conductor multstranded cable (Using colour code as per IS) connected to common earth dolly drawn through concealed PVC rigid conduit of suitable size, heavy grade (ISI Marked) having thickness not less than 1.8 mm with all and including all accessories, complete all as specified & directed. Note : Two Runs of single core cable with 1 run of earth cable and PVC conduit shall be measured as one Unit
S&F MCB distribution board double door type, SPN 8 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. complete all as specified & directed
S&F MCB SPN 40-63 Amp, 'B' Curve type 10 KA, 240 Volt complete all as specified & directed.
S&F MCB SP 6-32 Amp, 'B' Curve type 10 KA, 240 Volt complete all as specified & directed.
S&F MCB TPN 63 Amp, 'B' Curve type 10 KA, 240 Volt complete all as specified & directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm, 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting in hard/dense soil for laying of cable etc complete all as specified & directed.
M&L sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cm deep after laying the cable (punned down to 18 cm depth after laying and stretching of cable ) complete all as specified & directed.
Supply & laying sub class 'B' bricks laid dry and flat size 230 mm x 113mm x 75 mm across the length of cable for protection of cable complete all as specified & directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core. complete all as specified & directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm, 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth Strip of size 25 x 4 mm means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified & directed.
Supply, installation, testing and commissioning of LT feeder pillar box, factory made (Outdoor type), double door, slopy canopy made out of 3.15mm thick CRCA sheet and mounted on angle iron frame of size 65x65x6mm and 450mm high weather/dust proof, factory made, IP-54 with openable shutters on both sides front and rear having locking arrangements, totally enclosed weather proof, powder coated over a coat of primer suitable for 3 Phase, 4 wire 50 C/s, aluminium bus bar of suitable size and capacity, AC supply, electrically connected as per norms and fitted including connecting up all out going MCCB/MCB with suitable size of Aluminium bus bar or with stranded copper cable and fixing on suitable PCC platform comprising of the following accessories complete all as specified & directed. : (a) Aluminium bus bar of capacity 200 Amps- 1 set 3 Nos phase, 1 No neutral (b) MCCB 100 Amps capacity 415 V, 25 KA 4P (Incoming) (c) MCCB 63 Amps capacity 415 V, 25 KA TPN- 02. nos (out going) (01 X Spare) (f) Digital Voltmeter (0-500V) - 01 No (g) Digital Ammeter (0-400A) - 01 No (h) Cable glands of suitable size (j) LED Indicating lamp (set of 3 ) -01set.
Supply , laying , jointing of GI Pipe light grade of size 40 mm dia including jointing material/ GI fittings, complete all as specified & directed.
M&L preparing existing concrete surface including removal of loose particles and applying two coats of brush bond cementitious material like Nitobond-EP by Fosroc or equivalent in Dr. Fixit or Sika complete as per manufacturer's instructions for joining new concrete to the existing concrete member complete all as specified & directed.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.
Shri Radhey Associates
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .