Providing of 110mm Dia HDPE pipeline to North side 1st line and South Side 4th line of Siddartha vari Street in Nandamuri Nagar 58th Division

Manufacture, supply & delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply up to 90 mm dia in coil & above 90 mm dia straight length in 6 M.) for 110mm dia

Manufacture, Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For Pipe Ends Long Neck 110mm dia

Manufacture, Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For MS Flanges 110mm dia

Manufacture, Supply and Delivery of DI/DF Gate valve (soft seated) resilient seated soft sealing gate valves (sulice valves) with body bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S 3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4.all the valves should be Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS 1538. PN 16 (For 100mm dia PN 1.6)

Supply and delivery of CID joints with drilled holes and with rubber rings, bolts and nuts etc., complete with suitable for above pipes of class 5 as per ISS specification No. 8794/88 as amended from time to time including revision. (For 100mm dia Class-5)

Earthwork excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench (Less than 1 1/2 times the width)

Earthwork excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench (Greater than 1 1/2 times the width)

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure complete as directed by the departmental authorities. For 110mm dia HDPE Pipe

Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide, two coats of anty corrosie paint including cost of material, cutting ,welding, bending and fabrication charges, including transportaion, loading, unloading at work spot and as directed by the Dept. Engineer-in-charge.

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) For 100mm dia

Providing interconnection between to the existing pipe line and newly laid pipe line including of all necessary inter connection materials and washers and man mazdoors etc., complete and as directed by the departmental authorities.

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc., complete.

Construction of Masonary Sluice Valve pits suitable to the sluice valves of size from 80mm to 125mm as per TD No. 4/1941.

Supply and Fixing of House Service Connections (HSCs) for 12.70mm Dia Pipe line including all materials, labour charges and Restoration of Pipe Trenches with CC M30 etc., complete and as directed by the departmental authorities. For HSC's Main pit

Supply and Fixing of House Service Connections (HSCs) for 12.70mm Dia Pipe line including all materials, labour charges and Restoration of Pipe Trenches with CC M30 etc., complete and as directed by the departmental authorities. For Road Crossing

Providing 65mm dia HDPE scover points to 110mm dia HDPE distribution pipe line with necessary fittings such as 110 to 65mm reducers, 65mm dia HDPE pipe, class 5 CID Joints, 65mm dia long bend, 65mm dia long neck collor, MS flange and dummy plate with bolts and nuts etc., complete and as directed by the dept authorities.