Renovation of Park near Community Centre Sector 8, Ambala City, Ward No. 16.

Amount

Air Walker- Size 1000 mm x 300 mm x 1200 mm. Providing and faing Air Walker made from B Class GI Pipe of 2.5 mm wall thickness. The center pipe is 80 mm NB made from Class GI Pipe of 2.5 mm wall thickness, and the bottom support of M.S. round plate of 250 mm dia and 10 mm thickness is welded at bottom. The leg movement frame is of 40 mm Ni made from `B` Class Gil Pipe of 2.5 mm wall thickness. The handle frame is of 25 mm NB made from 8 Class GI Pipe of 2.5 mm wall thickness. To join the centre pipe and leg movement frame seamless pipe of 60 mm dia and 3 mm thickness and 25 mm dia solid bar is used. The bending M.S. plate is used to join the centre pipe and leg movement frame is of 6 mm thickness. The footrests is made from FRP/CI/Aluminum casting material, its sizes are 130 mm X 300 mm X 5mm. For the support MS. plate of 280 mm x 130 mm x 8 mm thickness is used. Closing Caps made from top quality FRP material with 2 mm thickness The pins used are made up of 25 mm diameter bright bar. The bearings used are 6205 permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from 5.5. material. The serclips used for assembly are of 25 mm diameter The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. All equipment shall be 3 party quality certified by International Testing Laboratory Govt. of India approved MSME Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 15.0 9001:2015 Quality Management System, 15.0. 14001 2014 Environment Management Systems for quality/design standard.

Leg Press Double Size 894 mm x 853 mm x 1203 mm. Providing and fixing Leg Press Double made from B Class GI Pipe of 2 5 mm wall thickness. The center pipe is of 100 mm. NB made from `B` Class GI Pipe of 2.5 mm wall thickness, and the bottom support of MS. Round plate of 250 mm diameter and 10 mm thickness is welded at bottom. The remaining outer frame is of 40 mm NB made from `B` Class GI Pipe of 2.5 mm wall thickness. To join the centre pipe and outer frame seamless pipe of 130 mm dia and 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 330 mm of thickness 3 mm and MS. Plate of thickness 5 mm and Size 250 mm X 200 mm is used to support it. The footrests is made from FRP/C II Aluminum casting material, its sizes are 130 mm X 300 mm and 5 mm thickness. The frame of footrests consists of 25 NB made from `B` Class GI Pipe of 2.5 mm wall thickness. Closing caps made from top quality FRP material which is of 2 mm thickness. The inner bushes are made from seamless pipe, its diameter is 60 mm and 8 mm thickness. The pins used in are made up of 25 mm diameter hardened bright bar The bearings used are of `6205 permanent angle don by attractive qolor spraving after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. To join the centre pipe and outer frame seamless pipe of 130 mm dia and 3 mm thickness is used. The seats are fitted on the outer frame is made of FRP material of size 330 mm X 330 mm of thickness 3 mm and M S Plate of thickness 5mm and Size 250 mm X 200 mm is used to support it. The footrests are made from FRP/ CI/Aluminum casting material, its sizes are 130 mm X 300 mm and 5 mm thickness. M. S.

Chest press

Bidder Name

Amount

THE DISIKA CO-OP LC SOCIEY LIMITED (GSTN-06AAHAT9401E1ZL) BID ID -1033441

bala ji contractors(GSTN-NA)--1033784

Bajaj Builders(GSTN-NA)--1033804

bala ji contractors

Bajaj Builders

bala ji contractors

THE DISIKA CO-OP LC SOCIEY LIMITED