SPECIAL REPAIRS TO ROOF AND ALLIED WORKS TO BLDG NO T-482 (SAND MODEL ROOM) AND CERTAIN REVENUE AND MINOR WORK AT MASIMPUR MILITARY STATION

B & R Division Items

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation boards etc) any thickness including cover fillets.

Dismantling boarding any description fixed in any position with nails all as specified.

Taking down old shutters of any discription n. exc 1.0 sqm each leaf and refixing in same opening with new hinge complete all as specified & directed.

Surface dressing n exc 15 cm deep and getting out in soft / lose soil complete all as specified

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft / lose soil complete all as specified

Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified & directed.

M&L for earth filling under floor incl spreading ,levelling & well ramming includuing watering as required n exc . 25 cm thick . (Note :- Earth obtained from relevant items mentioned above is reused )

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick ,spread, levelled including watering complete all as specified and directed.

M&L for Hardcore broken stone of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

Material & labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. completed all as spd and directed.

M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified.

M&L for providing 100 mm thick plain cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor fair and even complete all as specified.

M&L for PCC (1:3:6), Type C2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified.

M&L for providing 100 mm thick plain cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified.

M & L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid to slop of 1:12 finished even and fair without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4) type B-1 (Using 20mm graded aggregate) as in flooring to receive the topping layers complete all as specified & directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (Using 12.50mm graded aggregate) as in flooring to receive the topping layers complete all as specified & directed.

M & L for plain cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed.

M & L for Precast reinforcement cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in cover slab for man holes, chullah hoods, chajja, water troughts, mangers, shelves and similar article with plain faces set in cement mortar (1:4) incl necessary formwork complete all as specified and directed.

M & L Providing and laying 60mm thickness factory made precast concrete interlocking paver block of M-35 grade any size and shape confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, in required colour & pattern, laid over 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. Note : Item of Sand filling will be paid seperatly in relevant item.

M & L sand filling under floors or in foundation, base for precast concrete interlocking paver block including watering levelling and consolidation complete all as specified .

M& L for forming Construction joint 50mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified.

Use & Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.

Use & Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square/rectangular rough finished flat surfaces of concrete complete all as specified & directed.

Use and waste formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports etc for rough finished flat surfaces of concrete complete all as specified and directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L for RCC 1:1.5:3 type A-1 nominal mix (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC 1:1.5:3 type A-1 nominal mix (using 20 mm graded stone aggregates) nominal mix as in Columns, pillars, piers, posts and struts complete all as specified & directed.

M&L for RCC 1:1.5:3 type A-1 nominal mix (using 20 mm graded stone aggregates) nominal mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed.

M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roof landig balconies, canopies, deck slab and shelves and like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed

M & L for Mild steel TMT bars 6 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

M & L for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified .

M & L rendering 5mm thick cement plaster on ceiling surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified.

M & L rendering 10mm thick cement plaster on fair faces of brick wall or concrete surfaces in CM (1:6) finished fair and even complete all as specified.

M & L rendering 10mm thick cement plaster on other than fair faces of brick wall or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified.

M & L rendering 10mm thick cement plaster on fair faces of brick wall or concrete surfaces in CM (1:4) finished fair and even complete all as specified.

M & L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface with top 5 mm layer mixed with water proofing compound and finishing even and fare complete all as specified and directed. NOTE : Water proofing compound shall be measured & paid separately.

Supply only Integral water proofing compound (ISI marked) complete all as specified and directed.

M& L for Vetrified Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm not exceeding 0.36 sqm, in floors etc. set and jointed use in neat cement slurry 3.0 kg/sqm and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed.

M & L Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm and not exceeding 0.11 sqm, in floors etc. set and jointed use in neat cement slurry 3.0 kg/sqm and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed.

M & L Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) , area of each tiles exceeding 0.11 Sqm and not exceeding 0.18 sqm, in floors etc. joint free set and jointed use in neat cement slurry 3.0 kg/sqm and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed.

M & L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) , area of each tiles exceeding 0.11 Sqm and not exceeding 0.18 sqm as in skirting including 10mm thick screed bed or backing coat in cement mortar 1:3 laying of skirting/dado on walls complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface size 350 x 250 x 7mm/450mm x 300mm x & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and fix mild steel screw bolts 10 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5.0cm long complete all as specified and directed

Supply and fix mild steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5.0cm and n exc 10cm long complete all as specified and directed

Supply and fix mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410 Gde- E-250 quality A complete all as specified.

Supply and fix Roof trusses (framed), trussed,purlins, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats nuts bolts plates (plain or chequered) etc.

Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed

Supply and fix Steel works in gates and the like using tubular/ square hollow sections and side hung including pintle hinges, stops, hand-made sliding bolts, monkey tail bolts etc. induction butt welded tubes/SHS conforming to IS1161-2014/IS.4923-1997 grade St.-210 complete all as specified and directed

S/F bands, straps,clamps,cleats & small articles, supports or stays for rainwater,ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165 all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for Door, window, ventilators with one or more rebates including necessary jointing cleats, screws etc & fixed complete all as specified & directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters with frames of doors, windows (2-gauzed and 1-glazed) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Supply & Fixed Aluminum alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as directed and specified .

S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putting square exc 0.5 sqm in each pane complete all as specified.

S&F 4.00 mm thick figured glass pin headed type and glazing with oil putting, in square exc 0.5 sqm in each pane complete all as specified.

S&F Mortice lock of aluminium 2 lever vertical type size 100mm with all necessary accessories complete all as specified.

S&F Door closer hydraulically regulated, designation No. 3 universal type of cast iron body suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

Supply and fix Vitreous China urinals, bowl type urinal flat back large size of 465mm x 355mm x 265mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

Supply & Fixed Vitreous china wash down water closet pan ( pedestal pattern ) , white with P or S trap incl. seat cover but excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

Supply & Fixed Vitreous plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hanging device complete all as specified and as directed.

S & F PVC valveless,syphonic action type,low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting and flush pipe complete all as specified.

S & F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified.

S & F 15mm bore 2 in 1 tap cast copper alloy with capstan head, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.

S & F 15mm bore pillar tap cast copper alloy with capstan head, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.

Supply and fix 15 mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair two way angle valves with flange 15mm bore, fancy type, half turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply and fix Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified.

Supply and fix PTMT grating 100mm size round ( min wt 25 gram) complete all as specified.

Supply and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 of dia 20mm with fittings on wall/ ceiling or laying in floor complete all as specified.

Supply and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 of dia 16mm with fittings on wall/ ceiling or laying in floor complete all as specified.

Supply and fix 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified.

Supply and fix 75mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified.

Supply and fix 110mm dia PVC (SWR) bend with access door suitable for pipe complete all as specified.

Supply and fix 75mm dia PVC (SWR) bend with access door suitable for pipe complete all as specified.

Supply & Fixed 110mm dia PVC (SWR) vent cowl suitable for pipe complete all as specified.

Supply & Fixed 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door suitable for pipe complete all as specified.

Supply & Fixed 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door suitable for pipe complete all as specified.

M&L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed

M&L for plain cement concrete bed to drain pipe 150mm bore (Internal) as grade concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed

S&F gun metal gate valve 20mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for suitable iron pipe complete all as specified and directed.

M & L for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c,so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified . Make: Everest Industries Ltd or equivalent as per IS 14862.

M & L for preparation of new or previously untreated plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new or previously untreated plastered ceilingl surfaces and applying three coats of white wash complete all as specified and directed.

M & L for applying 1mm thick wall care putty on new or previously untreated plastered surfaces of walls, including preparation, to make the surface even and smooth all as specified and directed.

M & L for preparation of newly plastered surfaces and applying two coats of acrylic distemper over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of old plastered surfaces and applying two coats of acrylic distemper all as specified and directed.

Material & Labour for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm used by auto roller over new surfaces complete all as specified & directed.

M & L for preparation of new or previously un-treated steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M & L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

E & M Division items

M&L for point wiring with two single core 1.5 Sq.mm size PVC insulated FRLSH multistranded copper conductor cables as main wire and one single core 1.5 Sq.mm size green colour PVC insulated FRLSH,multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn in and including PVC Non metatilic concealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One light point controlled by one switch.

M&L for point wiring with two single core 1.5 Sq.mm size PVC insulated FRLSH multistranded copper conductor cables as main wire and one single core 1.5 Sq.mm size green colour PVC insulated FRLSH,multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn in and including PVC Non metatilic concealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for for One fan/ exhaust fan point controlled by one switch.

M&L for point wiring with two single core 1.5 Sq.mm size PVC insulated FRLSH multistranded copper conductor cables as main wire and one single core 1.5 Sq.mm size green colour PVC insulated FRLSH,multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn in and including PVC Non metatilic concealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One switch socket out let point 5 Amps on same board

M&L for point wiring with two single core 1.5 Sq.mm size PVC insulated FRLSH multistranded copper conductor cables as main wire and one single core 1.5 Sq.mm size green colour PVC insulated FRLSH,multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn in and including PVC Non metatilic concealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for One switch socket out let point 5 Amps on independent board

M&L for point wiring with two single core 2.5 Sq.mm size PVC insulated FRLSH multistranded copper conductor cables as main wire and one single core 2.5 Sq.mm size green colour PVC insulated FRLSH,multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn in and including PVC Non metatilic concealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for 3 pin, 15 Amp socket outlet, independent

S&F switch piano flush type button single pole one way 5 Amps all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.

S&F switch piano flush type button single pole one way 15 Amps all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.

S&F for ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F ceiling fan regulator socketed, step type flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed.

M&L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid Conduit concealed with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated FRLSH unsheathed multi strand copper conductor earth wire connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing incl taking out old existing submain wiring complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..

Supply and fixing wall mounted, compact LED batten 20 watt efficiancy 125 lm/w aluminium housing AC decorative including LED tube rod and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing building security light LED fitting 25 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. Cat Part No. TRP-415-25-57-SL-LM-NBK of crompton or equivalent make as per approved list of product.

Supply and fixing bracket for street light fittings of any size made out of GI pipe light grade 40 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket.

S&F for Plastic body Exhaust Fan 250 mm sweep, single phase 230 volts AC, 1200 RPM copper winding four blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 1.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.

S&F BLDC Ceiling fan 1200mm sweep single phase 230 volts AC, min air delivery 210 CFM with service valve 6.00 BEE 5 star rating with blade ,down roads electronic regulator and complete accessories complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.

Supply and fixing powder coated sheet metal enclosures DB, double door, single pole and neutral 8 way 240 Volt fitted with bus bar 200 Amps, DIN channel, neutral link and incoming contact.

Supply and fixing powder coated sheet metal enclosures DB, double door, single pole and neutral 4 way 240 Volt fitted with bus bar 200 Amps, DIN channel, neutral link and incoming contact.

S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

Supply and fixing MCB SPN 6-32 Amps 240 volts.as specified as directed by EIC.

Supply and fixing MCB SP 6 Amps to 32 Amps 230 Volt as specified as directed by EIC.

M & L for new building earthing complete with galvanised steel earth plate electrode 60 x 60x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron wire 4mm as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in hard/dence soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 all as directed by Engr-in-Charge

Supply and laying or fixing or passing through pipe. 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm x 2 core nominal cross section in service connections including PVC conduit not less than 20 mm necessary connection and providing cable lugs as required all as specified

Please Enable Macros to View BoQ information