Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.2 Cr
EMD Value
₹6.3 L
Closing Date
6 Nov 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
CHANDRU AMBALI
Restoration and Protection works to existing SP cum CTC at Ch 159.490 km & 160.200 km due to rain flooding and repairs of head regulator gate at ch 165.075 km and corresponding CD works under UTP Canal network (Proposed Canal Improvement from ch 166.000 to 166.390)
KNNL/2025-26/CN/WORK_INDENT3220
KNNL/2025-26/CN/WORK_INDENT3220
Open
Canals including Lining and Structures
Two Tender Document System(Two Cover)
KNNL Division UTP Div Ranebennur
11 documents required · 11 mandatory
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The intending bidder should have in last five years that is, from 2020-21to 2024-25completed at least 90Percentage of the contract valueas a prime contractor at least one similar nature of work such as canal work of value not less than 50Percentage of the estimate value of amount put to tender that is,Rs. 248.90 Lakhs.The Work done certificates obtained from the officer not below rank of Executive Engineer should be uploaded. The work done value of the previous year shall be updated to present price level of 2025-26 at 10Percentage per annum.
The intending bidder should have executed following minimum quantity of items in any one financial year in previous 5 financial years from 2020-21to 2024-25 for which the necessary certificates issued by officers not below the rank of Executive Engineer, shall be uploaded.a.Earth Excavation or Embankment 16915.77 cum b.M15 and above Cement concrete 709.00 cum c.Steel Reinforcement 98.36 Tonne d.Concrete lining 7797 sqm
A copy of the valid KPWD Class-II and above registration certificate
A copy of the valid Employees Provident Fund EPF registration Certificate
Each tenderer must pay specified full E.M.D. in the KPP portal platform through any of the payment modes as- aCredit card bDirect Debit c)National Electronic fund transfer NEFT d)Over the counter OTC). Tenders without valid E.M.D. shall be rejected
The valid copy of GST Registration Certificate
Each Tenderer should further demonstrate following Machineries Availability by owning 50percentage of the required specified flowing key and critical equipment for this work and the remaining 50percentage can be deployed on lease hire basis for all works provided, the relevant documents Commitment agreements etc. for availability for the work are furnished Documents to be scanned and enclosed The intending bidder firm company Joint venture should furnish details of ownership lease certificate of the following minimum requirement of machineries. The Contractor should upload Separate sheet for list of vehicles listed as below with RC details Registration no and type of vehicles owned or leased Name of Machineries or Equipment a Excavator Total 2No Own1No Leased or Hire 1No b. Tipper Total 4No. Own2No Leased or Hire 2Nos c. Machanical Concrete mixer Total 2No Own 1No Leased or Hire 1No d. Vibratory Road Roller Total 1No. Own-nil, Leased or Hire 1No f. Water tanker Total2No. Own1No. Leased or Hire 1No.
The GST Decleration Certificate In format Which is attatched InTender Notification
The annual turnover of intending bidder shall not be less than the two times the amount put to tender that is, Rs. 995.60 Lakhs in any two financial years during the last 5 years that isfrom 2020-21to 2024-25 in all Classes of Civil Engineering Construction works only). The audit Profit and Loss account certified by a practicing Chartered Accountant duly showing with UDINi.e Unique Document Identification Numberalong with income tax return should be uploaded. The turnover of previous years will be updated to the present value of the year 2025-26 giving weightage of 10Percentage for each previous year turnover value
Liquid assets and or availability of credit facilities of not less than Rs. 149.00 lakhs Credit Lines or Letters of Creditor Certificates from Nationalized Bank sor Scheduled bank lfor meeting the fund requirement etc, The Contractor should upload necessary documents issued by the Nationalized banks as per prescribed formats enclosed as annexure-I to the Notification
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity is equal to AxNx1.5 minus B ) for details refer tender document Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
₹5,000
₹6.3 L
18 Oct 2025
18 Oct 2025
7 Nov 2025
3 Nov 2025
3 Nov 2025
Restoration and Protection works to existing SP cum CTC at Ch 159.490 km & 160.200 km due to rain flooding and repairs of head regulator gate at ch 165.075 km and corresponding CD works under UTP Canal network (Proposed Canal Improvement from ch 166.000 to 166.390)
Excavation and removal of silt and silt mixed with sand from canal bed in dry condition by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed ...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete Grade M-15 and M-20 , wood work, steel work, including T&P and sca...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...
Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials,machinery, labour,all other opera...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and fixing LDPE sheet for bed and sides of canal including cost of all materials, labour, laying and joining as per specifications and all other ancillary operations complete.Using 750 micro...
Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour,cle...
Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining canal including cost of all materials, machinery, labour, clea...
Providing and laying 100 mm thick in-situ M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cy...
Dismantling, shifting and re-erecting mechanical concrete paver and DG set with all accessories across canal CD work or such other locations where dismantling, shifting, re-erecting and aligning of pa...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 20 mm thick 100 mm depth tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations comple...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all lead and lifts as per direction of Engineer incharge of the work.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant)complete with all lead and lifts as per direc...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by r...
Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP 3220 Restoration dtp..docx
Tender Document • 13.10 MB
TN CANAL WORKS fINAL.docx
Instructions to Tenderers • 1.94 MB
Ts ltr 79 25-26 30-08-2025.pdf
Others - TS LTR • 1.26 MB
Short term approval-2.pdf
Others - Short term approval ltr • 1.56 MB
3220 DTP APPR LTR.pdf
Others - DTP APPR LTR • 0.62 MB
Md ltr 6581 29-03-2025.pdf
Others - MD LTR • 0.43 MB
3220Dtp drawing main canal.pdf
Others - DRAWINGS • 2.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .