REPAIR / REPLACEMENT OF CERTAIN ELECTRIC WIRING FITTINGS AND FIXTURES AT NARENDER NAGAR UNDER AGE (I) RAIWALA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc all as directed.

M & L for point wiring with PVC unsheathed, fire resistance, stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessories/fittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with brass screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, complete all as specified & directed for the following.

(a) One light point controlled by one no of one way switch

(b) One Ceiling fan/ Exhaust fan point controlled by one no of one way switch

(d) One switch socket outlet 5 Amps on independent board

(e) One socket outlet 5 Amps on the same board

(f ) One light point controlled by two nos of two way switch

All as per Item No 2 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 15 Amps on independent board all as directed.

All as per Item No 2 here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 4.0 sqmm cable as earth continuity conductor for power Socket on independent board on the existing/new PVC surface conduit all as directed.

Supply and fix switch piano type one way 6 Amps, ISI marked all as specified and directed.

Supply and fix switch piano type 16 Amps , ISI marked all as specified and directed

Supply and fix Bell push, flush type, 6 Amp, ISI marked all as specified and directed.

Supply and fix switch piano type two way 6 Amps, ISI marked all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 pin, 15 Amps flush type with fuse & neon lamp indicator, ISI marked all as specified and directed.

Supply and fix socket outlet 2 in1,3 pin 5 Amps, ISI marked all as specified and directed.

Supply and fix sheet metal enclosures with metal socket and plug top Single pole andneutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 10 Amps all as specified and directed by Engr-in-Charge.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 Amps flush type with fuse & neon lamp indicator, ISI marked all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint all as specified and directed.

S& F double door sheet metail enclosure for DB , 4 way , TPN, with 200 Amps bus bar , 415 Volts suitable for housing MCBs and isolator and making good for disturbed surface with existing etc complete all as specified & directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted 4 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified Make: Hager/L & T/legrand

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC Conduit of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

S & F MCB SP, 2/3/4 amps, 240 Volts, 'C' Curve, 50 hz connect on existing or new MCB DB including distribute the load all as specified and directed by Engr-in-Charge. Make L &T /Legrand/Hager

S & F MCB SP 5-32 amps, 240 Volts, B Curve, 50 hz connect on existing or new MCB DB including distribute the load all as specified and directed by Engr-in-Charge. Make L &T /Legrand/Hager

S & F MCB SPN 32 amps, 240 Volts, B Curve, 50 hz connect on existing or new MCB DB including distribute the load all as specified and directed by Engr-in-Charge. Make L &T /Legrand/Hager

S & F MCB TPN 40-100 amps, 415 Volts, B Curve, 50 hz connect on existing or new MCB DB including distribute the load all as specified and directed by Engr-in-Charge. Make L &T /Legrand/Hager

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.20 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 5 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

Supply and Fixing 4 feet, LED fitting 1 x 20 watt decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use with necessary screws, bolt,T&P including removing old fitting deemed to be coated rate). Make: Havells cat No: LHEXACP7UN1W020 or equivalent make of Wipro/Shakti

Supply and Fixing LED fitting 1 x 10 watt decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use with necessary screws, bolt,T&P including removing old fitting deemed to be coated rate). Make: Havells cat No: LHEXACP7UN1W010 or equivalent make of Wipro/Shakti

Supply and fix New generation energy saving and environmental friendly long life LED Street light 30 watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC Cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07, PF 0.95 with suitable dia of GI bracket with required clamps, nut, bolt etc fixing on existing wall all as specified and directed by Engr-in-Chrge.

A ONE BUILDERS AND ENGINEERS

AJAY KUMAR CONTRACTOR

janta tradrers

Aditya Enterprises

TARUN ENGINEERING WORKS

Deven Associates

AMARJEET SINGH AND CO.

Neev Enterprises