PROVN OF TOILET BLOCK NEAR BUILDING NO P-42 (01 BLOCK) AND P-46 (01 BLOCK) OF 53 ENGR REGT AND CERTAIN REVENUE WORKS UNDER GE (A) AHMEDABAD

Amount

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.

Excavation in trenches n,exc 1.5 mtr deep & wide and getting out in any type of soil and n.exc 10 sqm on plant complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt in foundation, filling, mass concrete complet all as specified and directed.

M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed.

M&L mild steel TMT bar 6mm to 8mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed.

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complet all as specified and directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter,surface finished fair complete.

M&L for use and waste of formwork, rough finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping)

M&L for use and waste of Formwork, rough finished to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc.

M&L, for use and waste of Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all as specified & as directed

M&L for use and waste for Form work, fair finished to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm

M & L for providing reinforced cement concrete M25 design mix using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for providing reinforced cement concrete M25 design mix, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

M & L for providing reinforced cement concrete M25 design mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M25 design mix in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 25 cm in soft/loose soil, complete all as specified and as directed

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed

M&L brick work with sub class "B" old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

M&L Damp proof course 40mm thick In cement concrete 1:2:4, type B-0,to horizontal or vertica surfaces including water proofing compound and necessary formwork complete all as specified and directed.

Return filling under floor with excavated soil as received from item no 02 above and spreading and levelling in layers not exc. 25cm thick, including watering and well ramming.

M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified.

M&L for PCC (1:3:6)type C-2 using 40mm graded aggregate 75mm thick as in plinth protection all as specified

M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling ,chajja etc complete all as specified and directed.

M & L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed.(Water proofing compound measured and paid seperately)

M & L for 15 mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth w/o using extra cement

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured joint free tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick Backing coat CM 1:4 complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S & F 20 mm thick granite ( of any type) tiles machine cut in vertical at partition of urinal embeded in wall, jointed with CM 1:4 ans pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & rounding to edges of stone slabe complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2020)(make Raj shree or equivalent )

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extlruded section

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint over one coat of primer complete in all respect as specified

M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified

M&l for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash all as specified

S&F in repair 110mm bore PVC(SWR) pipe single socket in any length with rubber ring joint laid in trenches and floor complete all as specified and directed..

S&F in repair 75 mm bore PVC(SWR) pipe single socket in any length with rubber ring joint laid in trenches and floor complete all as specified and directed..

S&F PVC (SWR) vent cowl 75 mm bore

S&F in repair PVC (SWR) bends any radius 110 mm bore with oval access door

S&F in repair PVC (SWR) bends any radius 75 mm bore with oval access door

S&F PVC floor trap with grating including jointing waste pipe in runlead 100mm dia fixed in jointing with solvent cement complete as per direction by Engrin-Charge.

PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement

S&F viterous china wash down water closet pan (pedestal pattern) white complete all as specified and directed.

S&F plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified.

S&F CP health faucet fixed to water closet any type of WC complete all as specified and directed.

S&F vitreous china wash basin, white flat back size 550x400 mm including 32mm dia brass CP waste coupling, 32mm dia PVC waste pipe,PVC connection 600mmlong with fly nuts and washers, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed.

S&F decorative type Mirror of 5 to 6 mm thick with beveled /grind and fixed with studs including 8 to 9 mm thick PVC solid sheet backing and PVC beading/border all around of size as specified and all as directed by Engineer-In-Chagre

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe

S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as spfd.

Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified

All as per srl item No 57 baove but 20mm bore and -ditto-

Supply and fixing stop valves/gate valves/angle cock 15mm bore cost copper alloy srewed dowh gigh pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

S & F CP bib taps cost copper ally with crutch or butterfly handles screwed for iorn pipe or for brass derrule and fixed to 15mm bore pipe complete all as specified and directed

Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.

Supply and fixed pillar taps cast copper alloy with capstan head, chroumim plated fancy type. Screwed down high pressure with or w/o lettered "Hot" or "cold" with long screwed shanks and flynuts of 15mm bore complete all as specified and directed.

S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F 1000 ltr Rotational moulded polyethlene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity complete all as specified and directed.

S&F vitreous china urinal bowl type ( back or corner wall type and fixing plugs beeding urinal against wall in cement mortar 1:2 securinal plugs with and 60mm long brass screws, pointing arroud urinal backin cement and with grating and union for discharge pipe complete all as specified and directed.

M&L Salt-glazed stoneware gully trap 125x100 mm, setting and jointing with solvent cement complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth on brick walls complete all as specified and directed

S&F steel work in tubular trusses, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, including distances pieces, base plates, nut bolts etc including complete all as specified and directed.

S&F 10mm thick multi wall Polycarbonate sheet of colour as approved, fixed in roofs, wall clading etc with screw - bolts as per manufacturers instruction complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of Manhole.

Supply only Integral waterproofing compound

M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work

M&L for PCC(1:3:6) type C-2(Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 150 mm bore complete all as specified & directed.

M&L for laying and jointing RCC Class NP-2 drain pipewith collars of internal dia 150 mm complete all as specified and directed.

S&F factory made 50mm thick precast man hole cover , Size 1000mmx300mm

S&F factory made 50mm thick precast man hole cover , Size 600mmx300mm

M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel(1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 150mm internal dia pipe all as directed.

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge

M&L 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) incl necessary formn work as in sub base of path complete all as specified

M&L sand filling 50mm thick over floor or in foundations incl well ramming complete all as specified and directed.

M&L machine pressed pre-cast coloured designer type concrete inter-locking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment

S&F 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete all as specified and directed by Engr-in-Charge

M&L 32mm dia low density poly ethylene pipes (LDPE) of pressure rating 6Kgf/cm2 fixed complete to wall , ceiling or in floors etc

M & L for modular Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L for moorum/red bajri filling under floors laid in layers n ex 15cm thick, spred levelled and rammed including watering.

M&L for cement concrete 1:2:4 type B0 (12.50mm graded aggregte) as in coping bands, plinth courses, roof band lintel bands,column etc including necessary form work

M & L for RCC type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) as in manhole covers set in cement mortar (1:4) all as specified and directed

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed. (Note : Corrugation shape of sheet shall be approved by GE)

S&F mild rolled steel straps in joist, angle channel as in rafters etc conforming to Fe-410 W all as directed by Engr-in-Charge

S&F aluminium anodised barrel tower bolt of extruded section 200mm length of bolt

S&F 200mm long aluminium alloy anodised sliding door bolt with hasp & staple and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L for glazed ceramic coloured tiles of size 200mmx300mmx7mm as in dado set and joined in cement slurry and pointed in pigment of matching colour laid over and including 10mm thick screed bed in CM (1:4) complete

S&F soap dish of 1mm thick stainless steel box type fixed with screws of size 150mm x 150mm x 100mm

S & F Rotational moulded polythelene water storage tank 500 Ltr (Cylindrical vertical with closed top) hoisted and fixed in position all as spd.

M&L 'P' type PVC (SWR) floor trap of size 110/110mm with grating including jointing to waste pipe with solvent ement

M&L SGSW Gully trap square or round mounted type 'P' 150mm x 100mm .

S & F PVC (SWR) 110 mm dia branch piece, single (single Y) equal or unequal with oval access door.

S & F PVC (SWR) vent cowl size 110mm dia

S & F PVC (SWR ) 110 mm-75 mm dia reducer

S & F PVC (SWR) 75 mm dia branch piece, single (single Y) equal or unequal with oval access door.

M&L PCC type C-2 Mix 1:3:6 (20mm graded stone aggregate), 75mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete all as specified and directed.

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe ) incl 32m dia polyethylene waste pipe complete including providing & fixing plugs bedding urinal against wall in cm(1:2) securing urinal to plug with bran screw all as spd & directed

S & F Toilet paper holder, vitreous China,box type

M & L for40 mm thick Damp proof coures in cement concrete (1:2:4) type B0 to horizontal or vertical surfaces including water proofing compound necessary formwork

M & L for providing reinforced cement concrete 1:1/2:3 (Nominal mix) type A-1 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

M & L for providing reinforced cement concrete 1:1/2:3 (Nominal mix) type A-1 using 20 mm graded stone aggregate as in beams, cantilever, bressumers, lintels over 1.5 m span complete all as specified and directed

M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

S/F Non skid coloured plain/printed glazed tiles of size 300 x 300 x 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

S/F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4

M&L, Rendering 10 mm thick on fair faces of brick or concrete surfaces with in CM 1:4 on ceilling finished even and smooth all as specified & as directed by Engineer-in-Charge

S&F gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia.

S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe.

S&F stop valves fency type chromium plated (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed

S&F, 32 mm dia low density polythelens (LDPE) pipes of prerssure rating 6 Kgf/Sq cm

Supplied and fixed vitteous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device all as specified and directed.

M&L Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specified

M&L Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required all as specified and directed by engineer in charge

E/M Portion Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F socket outlet 2 in 1, 3 pin 6 amp flush type complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus or Crompton or Wipro or Bajaj as approved.

S&F LED fixture 8 watt including connection all as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or eqivalent in Wipro or Havells or Crompton or Bajaj or GE Lighting as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells or Crompton as approved.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F exhaust fan AC single phase, 230 volts, 300 mm sweep with louver metal body including cutting on the existing wall for making provision complete all as per specified and directed. all as per Havells. or equivalent in Almonard / CG / Bajaj as approved.

Earthing complete with galvanised steel earth plate electrode, 600x600x 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

M&L for galvanized iron water tubing medium grade ISI marked with all fittings laid in trenches for the 20 mm bore complete.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal size 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit.

VIJAY CONSTRUCTION CO