ADDN/ ALTN/IMPROVEMENT TO PCC BLOCK MASONRY PERIMETER WALL TO RCC WALL AT AF STN PHALODI

Amount

Dismantling of old concertina coil of any description from RCC / MS fencing post complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for fencing complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for boundary wall and removal of debris outside MD land complete all as specified. (reinforcement cut as required to facilitate demolition) Note The rate quoted by the contractor shall be deemed to included segregation of reinforement from concrete

Dismantling of Precast Cement Concrete (Unreinforced) articles / Precast concrete block masonry provided for boundary wall and removal of serviceable blocks complete all as specified and directed

Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debris out side MD land complete all as specified and directed

M&L for Excavating over areas, n exc 1.5 m deep and getting out in hard/dence soil complete all as specified and directed.

All as per items No 07 above but depth exceding 1.5mt and not exceding 3.0mt complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete grade M-25 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete grade M-25 Design mix as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for TMT bars 6 to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as in rough finished surface all as specified and directed.

Use & waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc.; vertical or to batter as in rough finished surface all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surfaces in CM 1:4 finished surface even and fair without using extra cement complete all as directed.

M&L for preparing new plastered surfaces of walls, applying two coats of cement base paint of 1st grade quality, in one or more tints and pattern (camouflage) over a coat of primer as approved complete all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated soil to a distance exc. 250 m but n.exc. 500m & depositing where directed.

S&F Plates (plain or chequered) channels, Fe-410-W (Gde E-250) square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. embeding in concrete and screwing etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanized 2 strand steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacing stringing, tightening and fixing to MS nibs embeded in MS fencing post etc securing and tying as crossing with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and as directed. (each line wire to be measured)

M&L erecting 450mm dia punched tape concertina coil fencing stretches along with two lines for RBT (supporting wire of the same material as concertina coil) having stranding specifications average weight not less than 1.06Kg/Rm including coating of px2 compound (anti rust) and fixed in angle iron brackets on compound wall with and including using necessary scaffolding along the length of wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length as in weep holes complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed.

M&L for Broken glass coping in CM 1:3 on top of wall complete all as directed.

M&L for fixing of 25mm Black DURA board HD-100 as per IS-10566 (Brand Supreme or equivalent make specifed in Appendix B) of ISI marked in crumple complete all as directed.

Schedule of credit Rs. 5,68,050.00

M/s godara infratech and power industries

SHREE GURU NANAK CONSTRUCTION COMPANY

M/s PRABHU DAN DETHA AND COMPANY

A S CONSTRUCTION COMPANY