Construction of Taluka Panchayat TDO Quarter (Cat D type) at Tharad Under Panchayat R and B Sub Dn. Tharad Under CDP-3/ 2024-25/ Package No.05 Ta.Tharad Dist. Vav-Tharad (Second Try)

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking of useful 201.00 Cu.M. 122.94

materials and disposing the excavated stuff with all lead Cu.M.

(A) Loose or soft soil.

2 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out and stacking of useful 156.00 Cu.M. 170.50

materials and disposing the excavated stuff with all lead Cu.M.

(B) Dense or hard Soil

3 Excavation for foundation 3.00 mt to 5.00 mt depth including sorting out and stacking of useful 43.00 Cu.M. 300.02

materials and disposing the excavated stuff with all lead Cu.M.

(C) Hard Murrum

4 Excavation for foundation 5.00 mt to 6.00 mt depth including sorting out and stacking of useful 11.00 Cu.M. 330.51

materials and disposing the excavated stuff with all lead Cu.M.

(C) Hard Murrum

5 Filling available excavated Earth (Excluding Rock ) in trench plinth side of foundation . in layer not 362.00 Cu.M. 136.92

excluding 20 cm in depth consolidation each deposited layer by ramming and watering etc. Cu.M.

ramming watering and consolidating etc. complete. Cu.M.

7 Filling in plinth with sand under floors including watering ramming, consolidating and dressing etc. 45.00 Cu.M. 444.75

complete. Cu.M.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

8 Carrying out plinth treatment to post construction / existing structure by spraying chemical 98.00 Sq.Mt. 86.86

solution for termite control treatment including labour and material consistent with I.S.I Sq.Mt.

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration

Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 litter give 1 %

concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical /

Sqm of surface is recommended as per I.S.

9 Providing and laying controlled cement concrete M-150 and curing complete including the cost of 11.00 Cu.M. 3845.06

form work and but excluding cost of reinforcement for reinforced concrete work in : Cu.M.

(a) Foundations, footings Bases of columns and the like and Mass concrete.

10 Providing and laying controlled cement concrete M-250 and curing complete including the cost of 27.00 Cu.M. 4499.55

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in foundation footings, base of columns and mass concrete.

11 Providing and laying controlled cement concrete M-250 and curing complete including the cost of 10.00 Cu.M. 8167.87

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in Columns, pillars posts and struts

in Columns, pillars posts and struts G.FLOOR

12 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregates 40 22.00 Cu.M. 2978.97

mm. nominal size) and curing complete excluding cost of from work in : Cu.M.

(a) Foundation and plinth

13 Providing and laying controlled cement concrete M-150 and curing complete including the cost of 14.00 Cu.M. 3943.04

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in plinth slabs

14 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 7.00 Cu.M. 8120.40

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in Columns, pillars posts and struts G.FLOOR

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

15 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 1.90 Cu.M. 8160.33

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in Columns, pillars posts and struts F.FLOOR

16 Providing and laying controlled cement concrete M-250 and curing complete including the cost of 11.00 Cu.M. 5897.39

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in Plinth BEAMS

17 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 11.00 Cu.M. 6310.48

form work but excluding the cost of reinforcement for reinforced concrete work in BEAMS Ground Cu.M.

18 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 2.00 Cu.M. 7649.74

form work but excluding the cost of reinforcement for reinforced concrete work in Lintels Ground Cu.M.

19 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 2.00 Cu.M. 8400.17

form work but excluding the cost of reinforcement for reinforced concrete work Cu.M.

in Chhajjas including finishing the exposed surfaces with cement mortar 1:3 (1cement :3 fine

sand) to give a smooth surface GROUND FLOOR

20 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 22.00 Cu.M. 6523.59

form work but excluding the cost of reinforcement for reinforced concrete work in SLABS for Cu.M.

Ground Floor

21 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 1.50 Cu.M. 7045.76

form work but excluding the cost of reinforcement for reinforced concrete work in STAIRCASES Cu.M.

Ground Floor

22 Providing and laying controlled cement concrete M-200 and curing complete including the cost of 0.90 Cu.M. 7748.72

form work but excluding the cost of reinforcement for reinforced concrete work in VERTICAL Cu.M.

WALLS for Ground Floor

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

23 Providing T M T. bar reinforcement of Fe-500D for R.C.C. work including bending binding and 13700.00 Kg. 77.29

placing in position complete up to floor Two Level Kg.

24 Providing and laying Brick work using common Brunt clay building bricks having crushing 66.00 Cu.M. 4214.33

strength not less than 35 Kg./Sq.cm.. In foundation and plinth in cement mortar 1:6 (1cement : 6 Cu.M.

fine sand)

(b) Conventional

25 Providing and laying Brick work using common Brunt clay building bricks having crushing 28.00 Cu.M. 4496.05

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level upto floor two level in Cu.M.

cement mortar 1:6 (1cement : 6 fine sand)

(b) Conventional {Ground Floor}

26 Providing and laying Brick work using common Brunt clay building bricks having crushing 8.00 Cu.M. 4538.16

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level upto floor two level in Cu.M.

cement mortar 1:6 (1cement : 6 fine sand)

(b) Conventional {First Floor}

27 Providing and laying Half brick masonry in common brunt clay building bricks having crushing 39.00 Sq.Mt. 672.27

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in super Sq.Mt.

structure above plinth level upto floor two level.

(B) Conventional

28 Providing and fixing One side hung shutters with both side pre-laminated Factory Pressed 35 mm 12.00 Sq.Mt. 5674.18

thick Flush Door of natural wood grain shade as approved by this office with T.W. moulding strip Sq.Mt.

on all side & Mirror Polished Granite Frame with Half Round Moulded Edges, etc complete

including three coats of oil painting with primer coat of approved manufacture and shade as

29 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof ( ISI 710) and fixing 0.8 11.00 Sq.Mt. 3112.82

mm thick decorative lamination sheet 20 mm x 2 mm T.W. facing batten and T.W. frame having a Sq.Mt.

size 7 cm x 4 cm using necessary fixtures, fastening, nails, fevicol, ball catch, magnet and inner

side of cupboard oil painting two coats with primer coat etc. complete as per detailed drawing.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

30 Providing and fixing drawer type kitchen basket cup board using T.W. Frame having size 5 cm x 3.00 Sq.Mt. 12767.41

3.2 cm and using 19 mm thick water proofing plywood ISI 710, 0.8 mm thick laminated sheet SS Sq.Mt.

Telescopic 550 mm SSF channel { Hattich or equivalent brand} brass, SS fixtures and fastening

handles as approved quality including using necessary screws, fevicol, T.W. batten facing 20 mm

x 6 mm patti for plywood including fixing SS {304} basket of 17" x 20" { 3 square, Evershine or

equivalent brand} (1) For Plain multy purpose 100mm, (2) Plain Multi purpose 150 mm, (3) Cup

saucer 100mm, (4) Partition 100 mm, (5) Partition 150 mm, (6) Cutlery 100 mm, (7) Plate

mm (8) Thali 200 mm (9) Vegetable Plain 150 mm (10) Bottle Basket 150 mm (11) Pull out

mm including fixing SS Telescopic channel as per approved quality and given detailed drawing

31 Providing and fixing standard extruded colour anodised Aluminium THREE TRACK ( 20 mm 11.00 Sq.Mt. 2694.68

series} sliding shutter with colour anodized section having outer frame bottom member 122.20 x Sq.Mt.

31.50 x 1.50 mm size weight per Rmt. = 1.648 Kg. and outer frame top and side member size

122.20 x 31.75 x 1.55 mm size weight per Rmt. = 1.398 Kg for shutter using top and bottom size

50 x 20 x 1.50 mm size weight per Rmt = 0.642 Kg. and interlock member size 50 x 29 x 1.50 mm

size weight per Rmt = 0.697 Kg., and handle member size 50 x 20 x 1.50 mm size weight Rmt =

0.571 Kg. top of approved shade and sliding shutters and providing rubber gasket and glazing

clips 19 x 17.30 x 1.2 mm size section weight per Rmt. = 0.154 Kg. all around glass on both sides

including providing heady handle, heavy lock, brackets, stopper 5 mm thick colour tinted glass for

glazing {Structural glass} fixed with transparent silicon gasket and providing and fixing 30 mm

wire net of stainless steel wire of IS gauge designation 85-G with wire of 0.71 mm dia including

fixing at work site, materials etc. complete.

32 Providing and fixing colour anodised Extruded Aluminium section louvered ventilator with 0.80 Sq.Mt. 2697.71

mosquito net using frame section member size 45 x 24 x 1.35 mm of approved shade from Sq.Mt.

standard aluminium section and fixing silicon rubber gasket around the glass all over including

providing 5 mm thick transparent float glass fixed in with all materials, labours and equipment as

per detailed drawing as directed.

33 Providing and fixing Safety grills of required pattern for windows / Door using 16 mm dia M.S 520.00 Kg. 112.62

polished bars at specified spacing inserted and welded inside in Rectangular CRC pipes of Kg.

required size as per design and hold fasting with coach bolts including one coat of primer and two

coats of matt finished oil painting etc complete.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

34 Providing and laying 24" X 24" Glossy Finished Full Body Vitrified 8 mm thick tile flooring over 20 67.00 Sq.Mt. 1344.58

mm {average} base of cement mortar 1:6 { 1 cement : 6 coarse sand} on new surface or fixing on Sq.Mt.

existing flooring by adhesive materials including dismantling of existing flooring and jointed with

colour cement slurry, (shade & pattern as directed)

35 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and 6.00 Sq.Mt. 1120.36

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with Sq.Mt.

flush pointing in white cement.

36 Providing & Laying 30cm x 30 cm Matt Finished Colour Ceramic anti skid 8 mm thick tiles (of 5.00 Sq.Mt. 987.14

approved brand} flooring in treads of steps and landings laid on a bed of 12 mm thick cement Sq.Mt.

mortar 1:3 (1 Cement : 3 coarse sand) finished with flush pointing in white cement.

37 Providing and laying 30 x 60 cm size PREMIUM PRINTED GLAZED TILES of approved brand in 48.00 Sq.Mt. 1488.24

skirting risers of steps and dado on 10 mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) Sq.Mt.

pointing in white cement and jointed with white cement slurry {Colour and Pattern as directed}

38 Providing and laying Mirror polished GRANITE stone slab 14 to 18 mm thick {Single piece not 20.00 Sq.Mt. 2547.22

more than 150 cm long} for stair steps and riser as per design incl. full moulded round front edge Sq.Mt.

in trade of steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with

grey cement slurry including rubbing and polishing etc. complete.

39 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with 71.00 Sq.Mt. 701.90

grade of concrete M300 pneumatic compressed / vibrated mechanically and as per approved Sq.Mt.

design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidelines of IRC : SP 63-2018 etc. complete.

40 Providing and laying water proofing treatment with china mosaic tiles flooring over avg 40 mm 104.00 Sq.Mt. 1078.69

C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm size} bedding for maintaining slope Sq.Mt.

for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one for

more colour as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

contain one Kg of water proofing materials per bag of O P C at plain or / and slops and to be

tempered to bring mortar ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the wall and curing with

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

bends any patterns or design as per drawing and cleaning by using oxalic acid etc complete.

41 Providing and laying Mirror polished Telephone Black / Madras Granite stone slab 14-18 mm 51.00 Sq.Mt. 3283.51

(Average) thick for Doors / Windows sill & Jams Cladding as per design incl. Half round moulded Sq.Mt.

both edge on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand ) jointed with grey

cement slurry including rubbing and polishing etc. complete & necessary G.I. fasteners.

42 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for 210.00 Sq.Mt. 283.95

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 Sq.Mt.

coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc. complete.

43 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for 40.00 Sq.Mt. 311.18

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 Sq.Mt.

coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc. complete.

44 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of stairs 90.00 Sq.Mt. 164.70

upto floor two level and finished even and smooth in : (I) Cement mortar 1:3 (1 cement : 3 sand) Sq.Mt.

Ground Floor

45 Applying two coats of acrylic lappy (putty) and two coats of primer of approved brand and 340.00 Sq.Mt. 40.59

manufacture on new wall surface to give an even shade including thoroughly brushing the Sq.Mt.

surface free from mortar dropping and other foreign matter and sand papered smooth.

46 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on wall 250.00 Sq.Mt. 83.18

surfaces to give an even shade including thoroughly brushing the surface free from mortar Sq.Mt.

droppings and other foreign matter and sand papered smooth

47 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on 90.00 Sq.Mt. 88.71

ceilings and sloping roofs to give an even shade including thoroughly brushing the surface free Sq.Mt.

from mortar droppings and other foreign matter and sand papered smooth

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

48 20 mm. thick sand faced cement plaster on walls upto height 10 meters above ground level 214.00 Sq.Mt. 320.70

consisting of 12 mm. thick backing coat of C.M. 1:3 (1 cement : 3sand ) and 8 mm. thick finishing Sq.Mt.

coat of C.M. 1:1 ( 1 cement :1 sand ) etc. complete.

49 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an 254.00 Sq.Mt. 73.83

required even shade after thoroughly brushing the surface to remove all dirt, and remains of Sq.Mt.

loose powdered materials etc complete.

50 Providing and fixing chicken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction 46.00 Sq.Mt. 92.92

the Brick masonary and reinforcement cement concrete member including fixing materials Sq.Mt.

scaffolding labour etc. complete.

51 Providing 12 mm wide groove / notch in plaster including finishing the same etc. complete for all 190.00 Rmt. 15.15

height. Rmt.

52 Constructing Sandwich Platform of 18 mm thick Polished Black Granite at top and 30 mm thick 3.00 Sq.Mt. 3381.48

Kota stone slab flooring fitting at bottom with cementing Materials / adhesives including making Sq.Mt.

necessary grooves in walls with Vertical Kotastone 30 mm x 2 No sandwich thick every 60 cm

centre to centre including all labour material of approved quality incl. full moulded round front

edge fixed in wall for partition and jointed with grey cement slurry including rubbing and polishing

etc. complete

53 Providing and fixing both side polished machine cut Kota stone shelves / partition 20mm to 25mm 13.00 Sq.Mt. 823.15

thick in single piece not more than 150 cm, embedded into wall at support including racking, filling Sq.Mt.

the groove using cement mortar 1:3 and finishing smooth the surface including cutting the stone

as and where required etc. completed.

54 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 20.00 Rmt. 170.36

National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal bore tube Rmt.

fitting and clamps including making good the wall, ceiling and floor etc. complete.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

55 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 20.00 Rmt. 253.82

National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal bore tube Rmt.

fitting and clamps including making good the wall, ceiling and floor etc. complete.

56 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 5.00 Rmt. 447.72

National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal bore tube Rmt.

fitting and clamps including making good the wall, ceiling and floor etc. complete.

57 Providing and fixing Heavy Handle valve of approved brand & following internal dia of Brass 3 No. 734.27

including fixing in pipe lines etc. complete Nos.

(C) 25 mm Dia

58 Providing and fixing Heavy Handle valve of approved brand & following internal dia of Brass 2 No. 1027.17

including fixing in pipe lines etc. complete Nos.

(E) 40 mm Dia

59 Providing and fixing Butterfly valve Butterfly valves IS 13095 with lSI mark PN 1.0 of approved 1 No. 2408.85

brand & following internal dia of Brass including fixing in pipe lines etc. complete No.

(A) 50 mm Dia

60 Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene pipes 15.00 Rmt. 280.23

approved brand for soil waste and ventilating pipes of the following outside dia. low density, Rmt.

complete with necessary fittings ,wall clamps etc including making good the wall ceiling and floor.

61 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 55.00 Rmt. 1053.73

confirming to IS 13592-1992 with one end plain and other end socketed with rubbering, & fitting Rmt.

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm centre to centre or

shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement including cost of all

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

materials.

62 Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe 20.00 Rmt. 834.38

confirming to IS 13592-1992 with one end plain and other end socketed with rubbering, & fitting Rmt.

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm centre to centre or

shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

63 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the 3 No. 733.26

following nominal diameter of self cleansing design with C.I. screwed down or hinged grating Nos.

including the cost of cutting and making good the walls.

64 Providing and fixing C.P. bib cock 15mm φ heavy duty with cap 3 No. 653.08

65 Providing and fixing wash basin fixing in platform with single hole for pillar tap with C.I or M.S 1 No. 3103.73

brackets painted white including cutting holes and making goods the same including C.P. brass No.

waste and waste pipes C.P. Pillar cock 15 mm Heavy duty swan neck & C.P. Angle stop cock

mm Heavy duty with cap (A) Vitreous china.

(II) Flat back washbasin 550 mm x 400 mm size (I) in white or colour

66 Providing and fixing SS Sink Glossy ASIS 304 Grade x 1mm thick with over all size 610 x 460 1 No. 3903.65

mm & bowl size 560 x 410 x 200 with single hole for pillar tap Fixing in sandwich platform No.

including cutting holes and making goods the same including C.P. brass waste and waste pipes

C.P. Pillar cock 15 mm Heavy duty swan neck & C.P. Angle stop cock 15 mm Heavy duty with

67 Providing and fixing brass shower rose with 15 mm or 20 mm inlet of approved brand 1 No. 282.16

(A) 100 mm dia. No.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

68 Provision and fixing water closet squatting Orissa type W.C. pan size 580mm integral footrest 1 No. 1462.48

and 100 mm P or S trap and including 25 mm dia CP brass flush valve and GI inlet connection No.

etc. comp. (A) Vitreous china long pattern white or colour

69 Providing erecting and fixing double coated PVC. (ISI) mark water tank of reqd capacity each with 5000.00 Liter 3.95

all necessary fittings & connection etc. complete on terrace. Liter

70 Providing and fixing 600 x 450 mm levelled edge mirror of superior glass mounted on 6 mm 3 No. 859.41

plywood sheet and fixed to wooden plug with CP brass screws and washers. Nos.

71 Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plug 2 No. 616.42

with CP brass screws 600 x 20 mm size {as directed by Engineer in charge} Nos.

72 Providing and fixing Soap dish 2 No. 202.00

(A) C.P. brass with C.P. brass screws Nos.

73 Providing and fixing S. S. Pag rail with 5 in one including fixing with all material and labour etc 6 No. 151.50

complete. No.

74 Providing and fixing C.P. brass viewing eye with brass frame and fixing in door shutter not 1 No. 202.00

exceeding 0.1 Sq.Mt. rectangular or square type as directed. No.

75 SIGNAGES ON Door 1 No. 656.50

Providing, Fabricating & Fixing 304 grade Stainless steel 1.5 mm thick brushed steel finish plate No.

fixed on a door using s.s studs and with punched(laser cut) lettering carried out on s.s plate of

required size and text as directed by Engineer etc. complete.

Size: 12" x 6"

76 Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and water tight C.I. 2 No. 1292.19

Cover with frame of 300 mm. X 300 size (inside) with standard weight Nos.

(I) Square mouth traps (C) 150 mm. X 100 mm size P or R type

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

77 Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with 2 No. 2932.93

bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light Nos.

duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame to be not less

than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls & bed concrete etc. complete.

(I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line.

78 Providing throating or plaster drip and moulding to R.C.C. chhajja or grove to plaster 30.00 Rmt. 43.05

79 Providing and fixing AISI 316 Grade stainless steel knock down railing system comprising 50mm 9.00 Rmt. 3660.24

dia railing fixed on 38mm dia SS Balustrade of 845mm height placed at maximum 1200mm C/C Rmt.

distance along with three SS horizontal members of 19mm dia connected at the side of baluster

with SS brackets. The balustrade shall be mounted on floor with base plate using specially

designed anchor fasteners and concealed by AISI 316 Grade SS base cover cap (Wall thickness

of pipes shall be taken as 1.50mm along with all visible component developed in high grade SS

and wherever required, joints to be filled with bushings for extra strength)

80 Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having weight not less than 35 kgs. 3 No. 958.17

81 Providing and fixing PVC Cowl vent of following dia etc complete as directed 2 No. 151.50

(B) 160 mm Dia Nos.

82 Providing and fixing stainless steel / Aluminium pipe approved pattern and size for windows 15.00 Rmt. 252.50

curtain including fixing in line and level as directed by Engineer in charge. Rmt.

83 Providing and fixing Decorative stainless steel Brackets approved pattern and size for windows 20 No. 757.50

curtain including fixing in line and level as directed by Engineer in charge. No.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

Electrification work

84 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI 15 Pt. 485.81

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in Pts.

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H. D. Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

85 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 5 Pt. 674.68

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of Pts.

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H. D.

Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

completeCat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

86 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on 7 Pt. 257.55

PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white Pts.

front plate modules erected on / in wall / ceiling with following type accessories

Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

87 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by Engineer In charge.

(1)One No. SP 6 Amp.Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 7 Each 151.50

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

(2) One No 5 pin plugCat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 7 Each 151.50

(3) Two Pin/RJ-11 Telephone Socket

[B] For Two Gang Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 1 Each 210.08

(4) TV Co-axial Socket outlet Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 1 Each 160.59

(8) Computer RJ-45 socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 3 Each 160.59

(9) 16 Amp. SP one way switch Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 7 Each 180.79

(10) 6/16Amp. Universal socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, 7 Each 199.98

Anchor Nos.

88 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 120.00 Mtr. 82.82

Copper conductor wire in following type of pipe to be erected concealed in /flushed on Mtr.

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

89 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 105.00 Mtr. 112.11

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm Mtr.

copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB

(h) 4 wire 6 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB 30.00 Mtr. 260.58

90 Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner 20.00 Mtr. 24.24

conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Mtr.

Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC

insulation. (a) RG

91 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE 15.00 Mtr. 20.20

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or Mtr.

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size

(a) Unarmoured (2) Two Pairs

92 Providing & erecting Switch board for Computer or electric apparatus consisting of following 3 Each 1133.22

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting Nos.

base frame covered with textured/metallic /white front plate, modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

93 Decorative call bell Ting-tong box type 250 volts complete erected 1 Each 71.71

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

94 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled 8 Each 373.70

on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel Nos.

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

between the ranges shown.)(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-

20, conventional 4 feet Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

95 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 5 Each 112.11

15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser, mounting Nos.

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(ii) 5 to 8 watts Cat-III Make;- Jaquar, Wipro, LT, Havells,Luker

96 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage 4 Each 7266.95

of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion Nos.

free High pressure die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description

wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.(iv) above 90 to 120 watts Cat.III Make;- Jaquar, Wipro, LT, Havells,

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

97 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking 1 Each 6173.12

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed No.

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III Make- Indoasian, L&T, Schneider, ABB

98 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having 4 Each 270.68

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Nos.

Cat.III Make- Indoasian, L&T, Schneider, ABB

99 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 18 Each 112.11

V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS Nos.

8828/1996 with ISI Mark Cat.III Make- Indoasian, L&T, Schneider, ABB

100 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 2 Each 330.27

10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity Nos.

(B) 40 Amp. Cat.IIIMake- Indoasian, L&T, Schneider, ABB

101 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity

(A) 40 Amp. Cat.III Make- Indoasian, L&T, Schneider, ABB 2 Each 668.62

102 providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 3 Each 2235.13

30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase Nos.

240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat. III Make- Indoasian, L&T, Schneider, ABB

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

103 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface 1 Each 3412.79

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC No.

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI)

(b) sheet steel double door(iii)8 way Make- Indoasian, L&T, Schneider, ABB

104 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 Kg. 794.87

105 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth resistance of installation duly stamped and

signed by agency and officer In charge has to ensure the value of earthing resistance mentioned

in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil 1 Each 4591.46

Length of pipe - 1 Mtr No.

Back filling compound - 1 Nos Bag of 15 Kg.

106 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating 8.00 Kg. 77.77

proper size of M.S. angles, square, round, flats, bars, channels, sections complete with cutting, Kg.

welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting, cementing, plastering & finishing

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

107 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium 20.00 Mtr. 140.39

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of Mtr.

following size of cables(C) 4 core 10 Sq. mm

Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB

(B) 4 core 6 Sq. mm 60.00 Mtr. 126.25

Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB Mtr.

108 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated 2 Each 38.38

armoured cable complete without going tails, insulating tape etc for following size of cables.(B) 2 Nos.

to 4 core 6 Sq. mm

(C) 2 to 4 core 10 Sq. mm 2 Each 38.38

109 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size 8 Each 6.06

evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium Nos.

plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

(B) 10 Sq.mm 8 Each 13.13

110 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing 5 Each 1948.29

ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with Nos.

aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge)) Make:- USHA, BAJAJ, CROMPTON, HAVELLS, ORIENT

111 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly 5.00 Mtr. 108.07

painted for fan complete with proper insulation without leakage and earthing. Mtr.

112 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 5 Each 108.07

50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Nos.

complete erected concealed in Ceiling with necessary finishing.

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

113 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with 5 Each 98.98

necessary hook of 10 mm M.S. Round Bar. Nos.

114 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 5 Each 18.18

115 Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS 1 Each 1703.87

body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II Make:- USHA, BAJAJ, No.

CROMPTON, HAVELLS, ORIENT

116 Providing & erecting approved make street light / wall mounting junction box compression 4 No. 616.10

moulded from SMC (thermoset plastic) vertical sliding cover having locking with square head stud Nos.

loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size.(B) 250mm x 194mm x 99 mm

117 Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (E) 0.60 Sq.Mt. 1927.08

118 Providing & erecting open well type horizontal mono block pump set with stainless steel body 1 Each 9613.18

having following specification (C) 1 H.P. single phase open well motor pump set suitable for 185 No.

LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel.Cat. II

Make:- PRIMA, AMRUT, DUKE, LUBI. CROMPTON

119 Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 1 Each 2100.80

18A range directly operated in totally insulated elegant enclosure for single phase operation up to No.

3 HP as per IS 13947 complete erected on P.W. Block with necessary connection. Cat-lll

120 Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. 1 Per Job 856.48

and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after Job

checking of threads of each pipe with coupling to take the load of the pump set and pipe

assembly filled up with water(D)For Open well Horizontal submersible pump set for sump well (i)

Item In Figure

Description of Item (with brief specification) Quantity Unit Amount

121 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper 20.00 Mtr. 104.03

cable approved make of following Size. (B) 2 Core x 2.5 Sq. mm.Make- RR Kabel, Havells, Mtr.

Avocab, KEI, Johnson, Polycab, ADCAB

122 Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating 1 Each 189.88

material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm No.

123 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB 1 Each 108.07

124 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB 2 Each 52.52

0 TOTAL AMOUNT PUT TO TENDER

0 TOTAL AMOUNT PUT TO TENDER

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words)

of the estimated rates mentioned above. Amount of my/our tender works out as under.

* Estimated amount put to tender * Estimated amount put to tender

Deduct :_____ %below Rs.________________ Add :_____ %above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

{* Strike whichever is not applicable.}

Signature of Deputy Executive Engineer Executive Engineer

contractor Panchayat R. & B. Sub Division Panchayat R. & B. Division

Tharad PALANPUR

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Signature of Deputy Executive Engineer Executive Engineer

Contractor Panchayat R. & B. Sub Division Panchayat R. & B. Division

Tharad PALANPUR