Construction of sub office building and renovation of existing 33 KV S S building Askali Under AEN O And M Suket .

Amount

Supply,stacking and spreading of graded crusher brocken hard stane aggregate fee from organic matter including stacking & spreading in yard/trenches as per the standard specification of size 40mm to 63 mm including all lead & lift, transportation, labour, loading, unloading & T&P required for graveling work as per direction if Engineer incharge incl.dressing & leveling.

Earthwork in filling of excavated earth except back cotton Soil With watering, and Compaction of Spreaded earth in 15-30 cm layers , levelled and neatly dressed as Per requirement of site and direction of engineer in charge, work includes cost of earth with taxes, loading, unloading, transporation,labour, water and T&P etc. Complete with all lead and lift.

Supply, stacking, spreading & hand ramming of quarry rubbish in layer not exceeding 15 cm (loose) incl. all lead & lift, transportation, loading, unloading with water & hand ranning with labour incl. T&P, machinery, water etc.complete in all respect finishing in lying,level and camber as per direction of Engineer in charges.

Jungle clearance including removal of grass, shrubs, trees of girth upto 150mm and disposal of rubbish upto a distance of 50 mm outside the periphery including all lead and lift complete in all respect as per direction of engineer in charge.

Collection, transportation (all lead) & spreading (including hand ramming) of crusher dust including stacking as Per the std. specification, spreading in layers not exceeding 15cm (loose) including dressing etc complete For all lead and lift complete as per direction of engineer incharge.

Providing & fixing sign board as per approved drawing and specification made of M.S. sheet 1.6mm thick of size 1200x900mm stiffened by flat 20x3mm on both side all around the plate and duly framed with 32mm dia medium M.S. black pipe fixed on frame of 50mm dia medium pipe (Vertical post 3600mm, 3000mm above ground level with angle iron hold fast 35x35x5mm with horizontal member 1500mm to be jointed with flat 40x6mm and post embedded in cement concrete blocks M-15 grade of 450x450x750mm size below ground level as directed by Engineer Incharge. All MS will be stove enameled and both side lettering, figuring and border on sheet with ready mix synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect all support framed post and steel tubes will be painted with primer and two coats of enamel paint as per specifications and direction of Engineer incharge. Over all size 1500x1200mm.

P&F steel almirah shutters for almirahs & wardropes in different sizes as per site requirement made with 20 Gauge CNC sheet & having three way locking devices with six brass lever double lock and godrej type handle 10mm dia locking rods, painted with three coats of superior quality danedar synthetic enmeled paint over approved quality primer coat etc. complete in all respect including fixing at site with help of suitable holdfast or nuts & bolts etc. (measurement shall made for front visible position / size of shutter including frames.

Stacking of laid crusher broken ballast in yard as per specification & relaying of line same in the eased yard in layers not exceeding 15cm (loose) as per specification including dressing etc. complete for all lead and lift complete as per direction of engineer in charge.

P&F of precast concrete interlocking blocks of M30 grade manufactured from fully computerised automatic stationary hydraulic vibropressed machine and fully computerised automatic batching plant of class A-I/A2 as per BS:6717:2001. The CC interlocking paving block to be laid on average 20mm thick bed of coarse sand and the joints is to be filled by fine sand laying procedure on compacted subbase as defined complete job is to be executed as per the instruction of Engineer in charge.And top surface of tile should be Design tile as per engineer in charge the rate to inclusive of all lead, lift & taxes.

General specification of block as under (glazed and non-slippery pattern)

1. Shape-As specified by engineer in charge

2. Tensile splitting strength & breaking load as per BS:6717:2001

3. Colour- As approved by Engineer in Charge.

4. Variation in dimension: must be less than 1.6mm

5. Variation in thickness: must be less than 3.2mm

6 Abrasion:As per BS:6717:2001

(A) 80 mm thick (glazed and non-slippery pattern)

M/s Satish Garg

M/s Satish Garg