CWE/BLY/GE(E)/105 OF 2024-25 MAINT AND ROADS AND ROAD FURNTIURE INCLUDING ROAD SIGNAGE BOARD AT RTS AND DEPOT HEMPUR UNDER GE(EAST) BAREILLY

Amount

Scarifying or picking gravelled macadam or bituminous macadam surface in area exc 400 sqm and exc 50mm & n. exc 100 mm deep complete all as specified and directed.

M & L 75 mm thick (compacted thickness) water bound meccadam (WBM) with coarse aggregates of grading (Granite trap or Basalt) 2 (63 to 40mm size) or of grading (50 to 20mm size), spread, rolled and consolidated to gradient, camber, level and super elevation with 8 to 12 tonne power roller, complete all as specified and directed.

M&L repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 kg per 10 sq m, putting in premix bituminious macadom well rammed and sealed with premixed sand seal coat (9.8 kg of binder with 0.09 cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping) depth of potholes exc 30 mm complete all as specified and directed.

Preparing water bond macadam top surface by brushing with hard wire brushes for removing caked mud vegitation etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirts (up to 1.0 mtr from the edges of road both side) etc all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer @10 kg per 10 Sqm using 80/100 paving bitumen VG 10 grading all as specified and directed.

M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and Applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre VG-10 (Paving bitumen) complete all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications)

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) Note for item No. 3 & 4: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 40/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F informatry relective sign board of required size of n exc 0.60 Sqm each, both side writing with stainless steel pipe frame on 2mm thick aluminium sheet size as required with high intensity prismatic reflecting tape including 2 Nos of stainless steel post in each board having 76mm dia, 16mm gauge steel duly polished for best shine fitted round globe on top of height 2.1m each complete all as specified and as directed.: Cat No SE-1007 of Sun Eyez product or equivelent in Specified make.

M&L for painting lines, dashes, arrows, letters etc on roads, pavements and like etc exc by providing 2.50mm thick thermoplastic hot applying paint of approved make of road marking of approved shade and shape with automated machine adhering of exc 10cm wide complete all as specified and directed.

VERMA CONSTRUCTION CO (BID ID -3229691)

S S CONSTRUCTION CO (BID ID -3226735)