Supply, Erection, Testing & Commissioning for LILO at Prop. 132kV Santrod substation from Exist. 132KV S/C Godhra - Dahod line & from existing 132KV S/C Godhra - Limkheda line with ACSR Panther Conductor on D/C & M/C tower with 48F OPGW cable having route length of 2.758rkm under Jambuva Construction Division of Jambuva circle on turnkey basis

Sr. No. Description of Works - SAC Code 9954 Amount in Rs.

PART -A Supply of Materials

Erection of Line

TOTAL F.O.R. COST WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL END COST WITH GST

I am / we are willing to carry out this service package of works contract stated above at GST 18% (in figure) ______ %

(in words _____ %) below / above the estimated TOTAL END COST for all the items stated there in.

The amount of tender works out with above % (in figure) for TOTAL END COST Rs. _____________ (in words Rs.

I / we confirm that our above quoted rates are ON firm price basis; except (i) Supply of Tower Materials

(Including Bolts-Nuts), (ii) Hardware & Accessories of AL-59 conductor and (iii) Erection Portion for which

Price variation will be applicable.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better

economical management and for the ease of Accountancy but the entire Contract, is to be assessed under GST Law,

as the Works Contract Service, which is, as per the provisions of Section 2(30), read with, Section 2(119), further read

with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar provisions, applicable

under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of Tax, at the rate

of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different segments or

portions of the Works Contract, may be specified separately, in the Supplies, with a final common Classification Code

of Works Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is

relavant for the purpose of contract since the contract is works contract and any separation in the works is for better

management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency

purpose which shall have no bearing on price or taxation payment.

Signature of Authorized Representative of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

Tender No. ACE(P&C)/Contract/E-438/TL/132kV/S&E

Supply, Erection, Testing & Commissioning for LILO at Prop. 132kV Santrod substation from Exist. 132KV S/C Godhra - Dahod line & from existing 132KV S/C Godhra -

Limkheda line with ACSR Panther Conductor on D/C & M/C tower with 48F OPGW cable having route length of 2.758rkm under Jambuva Construction Division of

Jambuva circle on turnkey basis

HSN / SAC Unit Freight, Unit

Description of Supply with Detail Specification of FOR Unit FOR Total Cost

Sr. code for Packing & Insurance

Service Package - Works Contract identification

Unit Quantity Unit Rate Rate (Excl. GST)

No. Forwarding Charges in

(SAC Code: 9954) only in Rs. in Rs.

A Supply of Materials

A.1 Tower Materials

A.2 ACSR Panther conductor KM 0.00 234904.00 2867.00 1229.00 239000.00

A.3 SR Insulators

A.3.1 132kV, 90kN Suspension SRI Nos. 19 2250.00 42.00 18.00 2310.00

A.4 Insulator hardware for ACSR Panther conductor

A.4.1 Single Suspension Nos. 18 1564.00 17.00 7.00 1588.00

A.4.3 Double Suspension Nos. 0 4413.00 34.00 15.00 4462.00

A.4.4 Double Tension Nos. 84 4945.00 51.00 22.00 5018.00

A.4.6 Mid Span Joint Nos. 15 695.00 6.00 3.00 704.00

A.4.7 Vibration Damper Nos. 576 572.00 11.00 5.00 588.00

A.4.8 Repair Sleeve Nos. 2 252.00 6.00 3.00 261.00

A.5.1 48 Fibre (DWSM) OPGW fibre Optic cable kM 2.758 195533.00 2385.00 1022.00 198940.00

HSN / SAC Unit Freight, Unit

Description of Supply with Detail Specification of FOR Unit FOR Total Cost

Sr. code for Packing & Insurance

Service Package - Works Contract identification

Unit Quantity Unit Rate Rate (Excl. GST)

No. Forwarding Charges in

(SAC Code: 9954) only in Rs. in Rs.

Installation Hardware set * & accessories for above

OPGW i.e. all cable fittings & accessories like

suspension clamps, tension clamps, vibration

dampers, earthing clamps, down lead clamps, in-

line splice enclosures etc. including; Pigtails FC-PC

A.5.2 a) Fibre Optic Approach Cable - kM 2.758 48279.00 644.00 276.00 49199.00

400 Mtrs - For 220KV S/S &

500 Mtrs - For 400KV S/S

(with installation hardware like ties/

clips / cleats, conduits, ducts,

supports, fittings, accessories etc).

(Any variation in quantities shall be absorbed by

TOTAL COST PART - A WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - A WITH GST

1). One set of installation hardware shall contain all installation hardware fittings as may be required for 1 kM of OPGW cabling.

2). LCT (Local Craft Terminal- Laptop) with EMS software shall have to be supplied by Manufacturer free of cost for local as well as remote configuration of FOTE

OEM will have to submit confirmation in written for following.

1). The bidder shall furnish the copies of valid type test reports for the offered equipment from NABL accredited Laboratory or KEMA type tested.

2). The bidder should have to confirm for guarantee of 5 years from the date of receipt of equipment in store in good condition or three years from the date of

commissioning of offered FOTE (Operational for Speech+DATA+Protection + Remote SCADA over OPGW) at respective Sub-station which ever will be earlier.

3). The bidder should have to confirm the service and spares support for at least 10 years after the guarantee period.

ERECTION PORTION

PART B (SCHEDULE - 01)

Tender No. ACE(P&C)/Contract/E-438/TL/132kV/S&E

Supply, Erection, Testing & Commissioning for LILO at Prop. 132kV Santrod substation from Exist. 132KV S/C Godhra -

Dahod line & from existing 132KV S/C Godhra - Limkheda line with ACSR Panther Conductor on D/C & M/C tower with 48F

OPGW cable having route length of 2.758rkm under Jambuva Construction Division of Jambuva circle on turnkey basis

Description of Supply with Detail Specification of HSN / SAC FOR Total Cost

Sr. Service Package - Works Contract (SAC Code code for

Unit Quantity Unit Rate (Excl. GST)

No. 9954) only in Rs.

B ERECTION OF LINE

The work of detail survey, preparation and

submission of profiles in 6 copies (PLSCAD as well

Detail scope of Work :-

(a) Fixing of tower as per actual requirement, site

condition and plotting of line on profile having

standard details i.e. span length, lat-long (co-

ordinate), chainage, weight and wind span, all

dimensions, scale, legends, tower spotting data

etc. as per requirement and along with all require

(c) Preparation and submission of tower schedule

as per standard require details with all the Major -

Minor crossing details in profile drawing and tower

schedule, along with due care of clearance as per

prevailing standards i.e., for all electric line with

pole, all type of track, river, pond, nala, road, canal

(d) Details of Right of Way in profile drawing. i.e.

Building, Temple, Well etc.

(g) Plotting line on TIKKA-MAP (Revenue Land

map) - Required TIKKA-MAP will be provided by

Importantly, any work other than mentioned will

align with the specific requirements outlined by the

Engineer-in-Charge.

Check Survey along with plotting of line route on

village (tika) map with Coordinates including

2 detailed survey, preparation of profiles and revision kM 2.758 9277.00

in original route alignment, if any and as per

instruction of EIC.

Excavation excluding back filling, but including

3 shoring, shuttering, dewatering, tree cutting for

tower footings etc. for:-

a) Normal soil either dry or wet / Sandy soil Cu.m 2030.14 307.00

b) Black cotton soil either dry or wet Cu.m 66.680 614.00

c) Normal submerged/marine soil where

dewatering is necessary.

d) Black cotton submerged / Marine soil where

dewatering is necessary

e) Soft Rock Cu.m 11.02 1066.00

f) Hard Rock Cu.m 0.00 2212.00

Installation of steel reinforcement in concrete

foundation including supply of GETCO Approved

M.S. bars, binding wire. Work also includes their

4 cutting, bending, shaping and binding with binding MT 11.3662 99900.00

wire and fixing in position of TMT bars as per

drawing before the concrete work and as per

instruction of the EIC

Description of Supply with Detail Specification of HSN / SAC FOR Total Cost

Sr. Service Package - Works Contract (SAC Code code for

Unit Quantity Unit Rate (Excl. GST)

No. 9954) only in Rs.

Stub-setting with prop or template including back-

filling, during back filling dispose of excess soil and

levelling of site is to be done as per instructions of

EIC but excluding excavation and concreting etc.

5 for all types of towers/extensions except special MT 32.405 8206.00

towers. (Weight of stub, cleat & template with Bolt

& Nuts of stub & template shall be counted)

6 ---- Do ---- up to 9 to 25 mtr extension MT 14.324 9918.00

Concreting of foundation by M20/M15/M25 mixture

including shoring, shuttering, compaction,

dewatering etc. for normal tower / tower with

extension upto 25mtr.

After completion of concrete work, curring

(watering to concerte) is to be done as per

instruction of EIC. (Rates are inclusive of supply of

GETCO approved Cement only.)

Grounding of towers with pipe type earthing

including excavation and back filling, with supply of

all materials like 32mm dia heavy duty 3 mtr. long

8 G.I. Pipe, 50 x 6 mm G.I. flat, GI bolt-nuts, with GI Set. 19 8985.00

spring washer, salt, charcoal etc. as per drawing

and as per instruction of EIC.

Grounding of towers with COUNTER POISE TYPE

including excavation and back-filling and supply of

all materials like GSS wire, GI lugs, GI bolt-nuts, GI

Spring Washer, salt, charcoal etc. as per drawing

and as per instruction of EIC.

Erection of super structure upto 6 meter extension

including tree cutting, fixing of tower accessories,

attachments except ACD /DP /NP /CIP /PP and

excluding tack welding of bolts as per instruction of

EIC. This includes taking delivery of tower

materials and bolt‑nuts from GETCO’s stores etc.

for normal, extension & special towers at

destination and keeping them in safe custody and

transporting the same to erection site.

Same as above but erection of 9/12/15/18/21/25

Mtr. extension with tower.

Fixing of Anti-climbing devices including supply of

barbed wire as per drawing and as per instruction

Fixing of Anti-climbing devices including supply of

barbed wire as per drawing and as per instruction

Fixing of DP / NP / PP / CIP including supply of

14 plates and supply of G.I. bolt-nuts & tack welding Loc. 20 3379.00

as per drawings. (D/C)

Description of Supply with Detail Specification of HSN / SAC FOR Total Cost

Sr. Service Package - Works Contract (SAC Code code for

Unit Quantity Unit Rate (Excl. GST)

No. 9954) only in Rs.

Tack welding of nuts upto approx. 10 mtrs. height

OR two bottom-most panel from ground level at

15 three places on the nuts diametrically and applying Per Bolt 35000.0 15.00

zinc rich paint immediately after tack welding and

as per instruction of EIC.

Stringing of ACSR/ AAAC 6 (Six conductors for

Double circuit including laying, jointing, tensioning,

clamping with armour rods, hoisting of insulator

16 string fixing of jumpers, dampers etc. & with RKM 2.758 112928.00

required tree cutting on entire length for adequate

clearances / safe charging of line, as per

instruction of EIC.

Termination and connection for making LOOP-IN-

LOOP-OUT arrangement with existing line during

specified outage including restringing of existing

conductors OR dismantalling / new stringing for

making LILO arrangements with existing line or for

17 change over line as per approved LILO 1.000 117351.000

arrangement in profile as per instruction of EIC in

COLD CONDITION and dismentalled materials to

be credited to near by GETCO's store or sub

station as per inst. of EIC.

Complete Installation of OPGW cable (24/48 fibres)

including laying, providing required hardwares, in

line splices to be encased in Fibre Optic Splice

Enclosures, Laying and termination of a fibre optic

approach cable required to connect Overhead

18 Fiber Optic Cable (OPGW) between the final iin kM 2.758 97193.00

line splice enclosure on the gantry/tower and the

Fibre Optec Distribution panel (FODP) to be

installed within the building at both the substation

ends as per technical specifications.

Link up of OPGW Cable including all related

activities as per inst. Of EIC.

Work of Painting of Line name, Location No., two

coat Painting Color code of desired length and

telephone no. on Tower Leg with letter of Gujarati

20 language using ISI marked Paint as per instruction Per Loc. 20 431.00

of EIC including Supply of paints and other require

materials.. b) All four legs - For 2 Nos. of Line (D/C)

TOTAL COST PART - B, SCHEDULE - 01 WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - B, SCHEDULE - 01 WITH GST

While calculating the weight of stub-setting, the weight of stub, cleat & templates shall also be added in stub weight.

2 Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3 The above rates are with supply of GETCO approved cement and steel by the contractor.

4 For concreting work, mixture machine is to be used as per site condition and as per inst. of EIC.

Tower dismantaling work should be carried out with help of using rust free spary and without cutting of any members

5 / leg / stub and as per inst. of EIC. , where applicable.

While crediting of material , agency has to submit the original gate pass copy / CR copy with required documents as

per instruction of EIC