Supply, Installation, Implementation, and Commissioning of CCTV camera based surveillance system along with central monitoring system at Government Model School, Thycaud

Amount

CCTV Surveillance System

Supply,installation,configuration and testing of 4MP IP IR Fixed Bullet Network Camera equipped with a 1/2.9-inch CMOS image sensor or better, delivering a minimum resolution of 2560 × 1440 at 20fps or higher.True day and night functionality with an automatic IR cut filter and support flexible angle adjustment with pan: 0°–360°, tilt: 0°–75°, and rotate: 0°–360°.Support dual video streams with independently configurable compression formats including H.264 and H.265.Secured with multi-level ID/password authentication.Operate reliably in extreme environments with an operating temperature range of -30°C to +60°C and up to 95% non-condensing humidity.Power source of 12 VDC or PoE (IEEE 802.3af compliant). The lens shall be a 4mm fixed lens.Camera offer Wide Dynamic Range (WDR) of at least 120 dB to handle varying lighting conditions and shall be IP66 or higher rated for dust and water resistance. The camera be certified for BIS.

Supply,installation ,configuration and testing of 4MP Intelligent ANPR Camera equipped with a 1/1.8 inch CMOS image sensor or better, capable of capturing number plates in various lighting and traffic conditions.The camera shall provide main stream resolution of 2688×1520 or 1920×1080 at 25 fps and sub-stream of 1920×1080 at 25 fps, supporting H.264 and H.265 compression formats.The camera shall support 3D digital noise reduction (DNR) and include a motorized vari-focal lens ranging from 2.8 mm to 12 mm (F1.2 ~ F2.5), with a horizontal field of view from 114.5° to 41.8°.The camera shall offer recognition in forward, backward, and bi-directional vehicle flow, with support for up to 100,000 whitelist and blacklist entries when used in conjunction with an SD card. Trigger types supported must include video-based, I/O coil, and radar mixed traffic modes.It shall operate reliably in environmental conditions ranging from -30°C to +70°C with humidity up to 95% (non-condensing). Power shall be supplied via 12–24 VDC or PoE (IEEE 802.3at compliant). The camera shall be BIS certified, complying with applicable Indian regulatory standards.

Supply, installation, configuration and testing of 5MP IR Vari-Focal Bullet Network Camera equipped with a 1/2.7 inch CMOS image sensor or better, offering a minimum resolution of 2560 × 1920 at 20 fps and 2560 × 1440 at 25 fps.The camera must feature pan (0° to 360°), tilt (0° to 90°), and rotation (0° to 360°) adjustment, and support dual-stream H.264 and H.265 compression formats, with at least two individually configurable video streams.The lens shall be a motorized vari-focal lens ranging from 2.7 mm to 13.5 mm, offering a horizontal field of view of 97° to 30°.The camera shall operate reliably in temperatures from -30 °C to +60 °C and humidity up to 95% (non-condensing). The enclosure shall be IP67-rated for dust and water resistance.It must support edge-based video content analytics including motion detection, video tampering, line crossing, and intrusion detection. Power shall be supplied through 12 VDC or PoE (IEEE 802.3af Class 3). The product must be BIS certified, ensuring compliance with Indian regulatory standards.

Supply,installation,configuration and testing of 4MP IR Turret Network Camera(DOME) featuring a 1/2.9 inch CMOS image sensor or better, with a minimum resolution of 2560 × 1440 at 20 frames per second or higher.The camera must allow flexible angle adjustment, supporting pan: 0° to 360°, tilt: 0° to 75°, and rotate: 0° to 360°.The camera shall include fixed lenses of 2.8 mm and 4 mm, offering a minimum horizontal field of view of 99.5° and 76.8° respectively, and shall be equipped with a built-in microphone.The camera must be ONVIF compliant (Profiles S and G) and shall operate reliably in environmental conditions ranging from -30°C to +60°C with humidity up to 95% (non-condensing). The enclosure must meet the IP67 rating for water and dust resistance. Power supply shall support both 12 VDC and PoE (IEEE 802.3af compliant). The product must be BIS certified, conforming to Indian regulatory standards.

Supply, installation , configuration and testing of NVR support 16 IP video input channels, with a maximum incoming and outgoing bandwidth of 160 Mbps.Recording resolutions up to 12MP, with decoding formats including H.265+, H.265, H.264+, and H.264. The device include independent HDMI and VGA video output interfaces, with 1-channel HDMI output at 4K 30 Hz and 1-channel VGA output at 1080P 60 Hz.Audio capabilities include 1-channel RCA audio output and 1-channel RCA two-way audio input/output. The NVR must support advanced analytics, including face picture comparison and human/vehicle classification via motion detection. It shall be capable of 1-channel decoding at 12MP with AI enabled or 2-channel decoding at 12MP with AI disabled, and support synchronous playback for up to 16 channels.Remote connection capacity shall allow up to 128 simultaneous clients. The unit shall support 4 SATA interfaces, each with capacity for up to 10TB, and include a serial interface (RS-232 and 2xRS-485 half duplex). The system must provide 16 alarm inputs and 4 alarm outputs, with optional configuration of 16/9 alarm inputs/outputs.Network protocol support must include TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTP, and HTTPS. The recorder must be equipped with 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces and USB ports including 2 × USB 2.0 on the front panel and 1 × USB 3.0 on the rear panel.The NVR shall support power input of 100 to 240 VAC, 50 to 60 Hz, and operate in environmental conditions ranging from -10°C to +55°C (14°F to 131°F) and humidity between 10% to 90% (non-condensing). The unit must be BIS certified, ensuring compliance with Indian standards.

Supply, installation , configuration and testing of NVR 32 IP video input channels, with a maximum incoming bandwidth of 256 Mbps and outgoing bandwidth of 160 Mbps, supporting recording resolutions up to 12MP. Support independent HDMI and VGA video output, including 1-channel HDMI output at 4K 30 Hz and 1-channel VGA output at 1080P 60 Hz. CVBS output is not applicable.The system must support 1-channel RCA audio output and 1-channel RCA two-way audio. The NVR support multiple video compression formats including H.265+, H.265, H.264+, and H.264. It must include built-in video analytics such as face picture comparison and human/vehicle analysis via motion detectionSupport 1-channel decoding at 12MP (with AI enabled) or 2-channel decoding at 12MP (with AI disabled). Support synchronous playback for up to 16 channels and allow remote connection from up to 128 clients.The NVR must have 4 SATA interfaces, each supporting up to 10TB capacity, and a serial interface comprising RS-232 and two RS-485 ports (half duplex). Alarm interfaces must include 16 alarm inputs and 4 alarm outputs, with optional configuration of 16 inputs and 9 outputs.The unit shall support standard network protocols including TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTP, and HTTPS, and feature two RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces. USB support shall include two USB 2.0 ports on the front panel and one USB 3.0 port on the rear panel.The power input shall be 100 to 240 VAC at 50 to 60 Hz, with an operating temperature range of -10°C to +55°C (14°F to 131°F), and working humidity tolerance of 10% to 90% (non-condensing). The unit shall be BIS certified, ensuring compliance with Indian regulatory standards.

The hard disk of 8TB Enterprise Series SATA HDD, designed for continuous 24x7 operation in surveillance and data storage environments. It shall support a minimum workload rate of 300 TB/year and feature a spindle speed of 7200 RPM or higher, with a cache buffer of at least 256 MB. It shall be compatible with NVRs and enterprise-class storage systems.

SUPPLY OF 24 PORT POE SWITCH

SUPPLY OF 8 PORT POE SWITCH

Supply of OFC Patch box (all accessories under the scope of supplier)

SUPPLY OF 19" 9U NETWORK 9U 550W 500D Rack, Cooling Fan 90CFM, 6 Socket PDU, Cable Manager 1U channel on Front, Hardware kit (20)

100 AH SMF Battery

SUPPLY OF HDMI CABLE 10 METERS

Supply of Earthing kit for all Racks with necessary accessories, Normal pipe earthing. (Included 4 sq mm copper wire)

SUPPLY OF OUTDOOR PVC BOX

SUPPLY OF 5 X 5 PVC BOX

SUPPLY OF RJ 45 CONNECTOR

SUPPLY AND FIXING OF 3 "x 6 mts GI POLE fabricated

SUPPLY OF FIXING 2" GI pipe-1meter length-Fabricated extended for CCTv base

SUPPLY OF OUTDOOR CAMERA CLAMP

Supply of Electrical Accessories:6A switch*3nos,5 in 1Socket-6Amp*3,6A MCB*1nos,Back box,Face plate and other fixing accessories for racks

SUPPLY OF OFC CABLE(6F)

SUPPLY OF NYLON STAYWIRE

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required

SUPPLY AND FIXING OF 25 MM of medium class PVC conduit along with accessories in surface/recess including cutting the same in the case of recessed conduit as required.

SUPPLY AND FIXING OF 20 MM of medium class PVC conduit along with accessories in surface/recess including cutting the same in the case of recessed conduit as required.

SUPPLY AND LAYING OF 25MM HDPE PIPE Laying of ISI Marked 25mm HDPE Pipe through wall & trench, Pulling of multiple cables(3x 1.5Sqmm Power Cable& cat cable, Ofc etc) as required by the site condition through the HDPE, Neat dressing and termination of these cables using Corrosion free accessories like legs,glands, screws etc,All accessories under the scope of supplier in all locations (as per the standards and site requirements as PWD electrical standards.)

SUPPLY OF 3 CORE 1.5 SQ.MM UNARMOURED POWER CABLE 3 CORE 1.5 Sqmm UNARMOURED POWER CABLE ISI marked 1100Vgrade copper unarmoured cable with 1.5 sqmm multistranded annealed high conductivity electrolytic grade plain conductor, PVC insulated, cores colour Red, Black, Green, 3 such cores laid up,overall PVC sheathed as per IS:694/90

43-inch LED Monitor with LAN port

INSTALLATION OF CAMERA Fixing, Termination and Focusing of Cameras on wall/Pole using PWD Standard- Corrosion free Nut & Bolt or Fishers,screws and all other accessories under the scope of supplier (As per the standards and customer requirements)

INSTALLATION OF NVR

TRENCHING FOR CABLE LAYING

FIBRE SPLICING Splicing charge for terminating ofc cable including all accessories

PULLING PVC CONDUIT Laying of ISI Marked PVC conduit (ivory) through wall & floor as required by the site condition through the PVC, using Corrosion free accessories like legs,glands, screws etc, All accessories under the scope of supplier in all locations (as per the standards and site requirements as PWD electrical standards.)

Of Patch Chord Wavelength. 1310/1550nm ; Cable Length, 10m, Jacket Color ; Cable Jacket, PVC, Repeatability. <=0.1dB. SC/PC-SC/UPC Simplex OS2 9/125 SMF Fiber Patch Cable"

Fabricated pole clamp in 2" GI pipe class B ISI - with 3' pole clamp, with GI coated nuts and bolts

Pole/ wall mount JB Sintex Size 25 x 35 sintex type fiber outdoor all weather enclosure

24 Port Fully loaded Patch Panel CAT 6 Identification: ID plate, PVC, Transparent color with paper | Material: Phosphor Bronze with Nickel Plated Panel: SPCC, 1.5mm thickness with Black (RAL 9005) color painted Jack Bracket Set: ABS, UL 94V-0 | Contact Brackets: PC, UL 94V-2, Transparent color Support Bar: SPCC, 1.5 mm thickness with Black (RAL 9005) color painted PCB: FR4, UL 94V-0 | Finish: 50 micro-inches Gold plated on plug contact area

24 port switch managable web Number of Ports 24-Port LAN Switches Primary Port Type Gigabit Network Type LAN Capable Color Black Input Voltage upto 440 V Power Consumption 20W Dimensions 8x16x4 Inch (LxWxH) Weight 3 Kg

24 port cat 6 patch panel Material: Phosphor Bronze with Nickel Plated Panel: SPCC, 1.5mm thickness with Black (RAL 9005) color painted Jack Bracket Set: ABS, UL 94V-0 | Contact Brackets: PC, UL 94V-2, Transparent color Support Bar: SPCC, 1.5 mm thickness with Black (RAL 9005) color painted PCB: FR4, UL 94V-0

Cat 6 Patch chord - RJ45 CAT6 Ethernet Patch - Solid core 568B - length 1 meter - UTP pure copper.EIA/TIA TSB-40A ETL Verified.Moulded Strain Relief.Category 6.

System termination, connectorisation , testing and commissioning

Syama Dynamic Integrated Services Private Limited (BID ID -2264627)

KELTRON (BID ID -2257384)