REPAIR TO INTERNAL ELECTRIFICATION AND REPLACEMENT OF UNSERVICEABLE E AND M FITTINGS AT NPOL AREA UNDER AGE I R AND D KOCHI

Amount

Taking down carefully old and unserviceable copper / aluminium point wiring for light/fan/socket or power point complete including fittings such as switches, ceiling rose, pendents, regulators, sockets, bell, distribution boards and MCB's etc and making good disturbed surface of walls. floors etc to match with the existing surface complete all as specified and directed.

M & L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated and unsheathed FRLS cable, copper conductor multistranded passing through including heavy duty PVC casing caping /Existing concealed /surface conduit with all accessories surface type on wall/roof/floor/with MS box concealed with laminated top cover / surface PVC box with duly earthed with 1.5 sq mm PVC insulated and unsheathed FRLS cable, multistranded copper conductor cable as earth wire one light point /bell point /fan point controlled by one switch all as specified and as directed by the Engineer - In - Charge.

All as per item No 2 above but with 1.5 sq mm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with 1.5 sq mm cable (incl connecting to earth dolly) suitable for 5 amp socket outlet point on same board all as specified and as directed by the Engineer - In - Charge.

All as per item No 2 above but with 1.5 sq mm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with 1.5 sq mm cable (incl connecting to earth dolly) suitable for 5 amp socket outlet point on independent board. All as specified and as directed by the Engineer - In - Charge.

All as per item No 2 above but with 2.5 sq mm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with 2.5 sq mm cable (incl connecting to earth dolly) suitable for 15 amp socket outlet point. All as specified and as directed by the Engineer - In - Charge.

S&F switch modular type, 6 amp, 1 module 230 volts grade, one way.

S&F switch modular type, 16 amp, 1 module 230 volts grade, one way.

S&F socket outlet modular type, 6 amp 2 module multipurpose type 230 volts.

S&F socket outlet modular type, 6/16 amp 2 module multipurpose type 230 volts.

S&F ceiling rose PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

Supply and fixing LED light fitting along with tube rod 1X20W,230V Ac surface and wall mounted LED batten with aluminium housing and integrated electronic driver , connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer in Charge. Make Havells . Cat Part No-LUMILINEPLUSSB20WLED865SPCSS.

Supply and fixing LED light fitting along with tube rod 1X10W,230 V Ac surface and wall mounted LED batten with aluminium housing and integrated electronic driver , connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer in Charge. Make Havells . Cat Part No-LUMILINEPLUSSB10WLED865SPCSS.

S&F electronic ceiling fan regulator, modular type stepped type one module suitable to work on 230 volts complete all as specified and directed by Engineer in Charge Make Indo Asian. Cat part No 800041

S&F modular cover plate with frame for the following modules

3 modules

4 modules

6 modules

8 module

12 module

S&F Metal flush boxes for the following modules

3 modules

4 modules

6 modules

8 module

12 module

S&F switch socket combination 5 Amp with PVC box suitable for 230 Volt

S&F switch socket combination 15 Amp with PVC box suitable for 230 Volt

S&F switch 5 Amp flush type single pole one way

M&L switch socket combination2 in 1, 5 Amp flush type

All as per item No - 19 above but 5/15 Amp

Supply only ballast copper wound vaccum pressure impregnated suitable for 36/40 watt FTL fitting

Supply only ballast copper wound vaccum pressure impregnated suitable for 18/20 watt FTL fitting

Supply only bipin holder FTL fitting 36/40 watt all as specified and as directed by Engineer in Charge.

Supply only 3 pin plug top 6 Amp

Supply only 3 pin plug top 16 Amp

M&L bell AC 230 V ding dong type

Supply only angular type batten holder insulator body of PVC/ polycorbonate type suitable foe 230 Volt

Supply only electronic fan regulator socket / step type AC 230 Volt.

Supply only bell push , flush type 5 Amp suitable for 230 Volt

Supply only fluorescent tube rod suitable for 36/40 watt

Supply only fluorescent tube rod suitable for 18/20 watt

Supply only fan condencer / capacitor suitable for ceiling fan of any sweep/ make

Supply only LED lamp of 7 watt

Supply only LED lamp of 9 watt

Supply only starter suitable for 20/40 watt FTL fitting

Supply only electronic ballast suitable for 36/40 watt FTL fitting

Supply only electrnic ballast suitable for 18/20 watt

S&F single pole and nutral enclosure with a two pin earth plug and socket with one single pole MCB of 20 Amp

S&F MCB DB SPN 4 way double door with 200 Amp busbar

S&F MCB DB 8 way with 200 Amp rated busbar , double door

S&F MCB DB 12 way with 200 Amp rated busbar , double door

Supply and fix MCB DB TPN double door 4 way complete all as specified and directed .

S&F MCB TPN 40 to 100 Amp all as specified and directed.

S&F MCB SP 5 to 32 Amp all as specified and directed.

S&F MCB SPN 25 to 40 Amp

M&L sub main wiring with 2 run single core 4.0 sq mm PVC unsheathed copper multistranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow,saddles etc of white/lvory colour PVC conduit includinh multi stranded copper earth conductor 4.0 sq mm two run as earth continuty conductor including taking down old submain wirig all as directed by Engineer in Charge.

M&L sub main wiring with 2 run single core 6.0 sq mm PVC unsheathed copper multistranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow,saddles etc of white/lvory colour PVC conduit includinh multi stranded copper earth conductor 6.0 sq mm two run as earth continuty conductor including taking down old submain wirig all as directed by Engineer in Charge.

M & L for Earthing complete with using galvanised steel earth plate 60 X 60 cm X 6 mm thick electrode , buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 25 X 4 mm galvanised iron strip as earth lead by means bolts, nuts, check nuts and washers all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion necessary complete all as specified and as directed.

M&L for painting/ marking of quarter number on their respective energy meter installed at all married accommodations with synthetic enamelled paint and with suitable colour as required at site complete all as specified and directed by Engr-in-Charge.

WELTRONENGINEERINGSERVICES