Special repairs to internal road various locations under GE South Ambala Cantt

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sq m, exceeding 50 mm and not exceeding 100mm deep complete all as specified and directed.

Material and labour for repair to pot holes of any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads/path etc cutting around edges to at least 25mm and more as per site requirement in depth and making good by applying tack coat of paving bitumen @ of 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam binder and chipping) depth of pot holes exceeding 30mm complete all as specified and directed.

Material and labour for preparation of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with air compressor to remove all loose dirt etc and applying evenly priming /tack coat using paving bitumen (Grade VG-10) at the rate of 10 Kgs per 10 Sqm on prepared surfaces complete all as specified and directed.

Material and labour for water bound macadam, 75mm thick (compacted thickness), using course aggregates of limestone/ sandstone/ flint/ quartzite of grading 2 (63 to 40mm size), blinded with stone screening type 'A', spread, watered, rolled and consolidated to gradient and camber as required by using power roller 8 to 12 Tonne capacity complete all as specified and directed.

Material and labour for preparation of black top bituminous macadam surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a bituminous tack coat of GRADE VG-10 @ of 5 Kg per 10 sqm , complete all as specified and as directed.

Material and labour for preparation of new road surface and applying 2mm thick retro-reflective thermo plastic road marking paint with glass beads, exceeding 10cm width or girth, hot applied on road surface mechanically conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of surface transport) specification 803 Vol -III.complete all as specified and directed.

Material and labour for premixed,Bituminous Macadam with 4% binder content by weight of total mix, rolled and compacted to required camber and gradient with paving bitumen of grade VG-30 grade using mechanical paver and rolling with 8 to 10 tonne power roller/ tandem vibrating roller etc complete all as specified and directed.

Material and labour for laying bituminous premix semi dense asphaltic concrete 30mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 10-12 tonne capacity vibratory road roller rolled to uniform smooth surface ,complete all as specified and as directed.

Note:- Amount of credit of Rs. 5,562.50 for retrieved materials is mentioned in Schedule of Credit Page Nos. 53R of tender documents in pdf form which will be deducted offline while acceptance of tender.

SMT Construction

M/s Super Trading Corporation

m/s parmod kamar

Laxmi Builders