Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC KURUPPAMPARAMBIL PERUMPADAPPU PALLURURHY P O ERNAKULAM KERALA 682006 | ERNAKULAM | KERALA | 682006 | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹50.0 L+₹2.6 L (5.57%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹50.8 L+₹3.4 L (7.27%)Rejected-Finance 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
21 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2023_MES_624577_1
8279_GE_NW
Open Tender
Civil Works
Item Rate
180 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹99,800
Yes
4 Mar 2024
21 Oct 2023
23 Nov 2023
21 Oct 2023
21 Nov 2023
9 Nov 2023
21 Oct 2023 - 14 Nov 2023
Amount
Demolition of brick work, stone / boulder / PCC block masonry built in cement or cement lime mortar complete all as specified and directed
Demolition of concrete in ground floors and pavings n exc 15 cm thick (below or above ground level) complete all as specified and as directed.
Dismantling floor or wall tiling including cement mortar bedding and removing rubbish outside MD land complete all as specified and directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding. 1.5 Sqm each complete all as specified and directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed
Taking down cement plaster on brick or stone wall surface etc including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed
Material and labour for preparation of old decorated wall surface of ceiling and applying three coat of white wash complete all as specified.
Material and labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces of wall and applying three coat of white wash complete all as specified and directed
Material and labour for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Material and labour for 100mm thick plain cement concrete 1:4:8 (40mm graded stone aggregate) type D2, as in floors to receive top layer complete all as specified and directed
Material and labour for precast cement concrete block masonry with solid blocks exceeding 10 cm width type C1 1:3:6 using 20mm graded stone aggregate set in CM 1:6, complete all as specified and directed
Material and labour for rendering 10mm thick with CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
Material and labour for rendering 20 mm thick in two layer, back coat 12mm thick in cement mortar 1:6 and subsequent coat of 8mm thick in cement mortar 1:4 mixed with water proofing compound 3% by weight of cement on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed (Note- water proofing compound shall be measured and paid separately)
Supply only water proofing compound complete all as specified and as directed
Material and labour for rendering 5mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed
Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (Square or rectangular as directed by the Engineer in Charge) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured or white cement to match the tiles over and including screed bed base 10mm thick in CM 1:6 complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed
Material and labour for glazed coloured ceramic tiles 350mm X 250mm X 7mm / 450mm X 350mm X 7mm thick in vertical surfaces such as skirting or dado set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of the tiles over and including a backing coat 10mm thick in CM 1:4 complete all as specified and directed Note: Quoted rate shall be inclusive of backing coat
Supply and fix in repair 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level with inlet, ball valve, float &handle including brackets, PVC inlet connection 45 cm long ,15 mm dia with brass check nuts and connection to stop cock etc complete all as specified and as directed
Supply and fix in repairs white vitreous china wash down water closet (Pedestal pattern) complete including plastic seat cover white, flush pipe and trap, connection to drain, closed pattern with flat bottom, and cover with plastic hinges including 10 litre capacity low level flushing cistern and connecting to existing outlet pipe complete all as specified and as directed
Supply and fix in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete (excluding flushing cistern and flush pipe) all as specified and directed
Supply and Fix Vitreous China urinals, white, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement including flush pipe and waste pipe and urinal spreader as approved but excluding flushing cistern complete all as specified and directed
Supply and Fix Vitreous China urinal partition, white of size 310x700 mm in repairs complete all as specified and directed
Supply and fix PVC(SWR) multi floor trap with grating including jointing to waste pipe fixed in cement solvent complete all as specified and as directed
Supply and fix in repair brass chromium plated shower rose with swivel joints any size including fixing to steel pipe or union complete all as specified and as directed
Supply and fix 50mm bore High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed
Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
Supply and fix in repair 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed
Supply and fix in repair 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete all as specified and directed
Supply and fix in repairs 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed
Supply and fix in repairs 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed
Supply and fix in repairs vitreous china wash hand basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and provision of fixing of brackets and placing of stand, chromium plated waste coupling with long screwed shank, fly nuts, flange, washers, waste pipe, brass unions complete all as specified and directed
Supply and fix Fancy type Pillar taps of bore 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed
Supply and fix for powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
Supply and fix for powder coated aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed
Supply and fix aluminium powder coated dark coloured deco grill 75 mm aperture, made out of 7.5 mm plate and finished deco grill will have 7.5 mm width and 6 mm thick with rubber beading & looks etc complete all as specified and directed
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed
Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed
Supply and fix 100mm size stainless steel butt hinges, medium weight complete all as specified and directed
Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed
Supply and fix aluminium handles cast type anodised, size of handle 150mm complete all as specified and directed
Supply and fix 250 mm length aluminium alloy anodised sliding door bolt with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed
Supply and fix 5 mm thick sheet glass, one side frosted ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane fixed complete all as specified and as directed
Supply and fix aluminium anodised tubular towel rail ,20 mm dia, D type ,60 cm long between flanges including a pair of brackets complete all as specified and as directed
Supply and fix toilet paper holder, vitreous china, box type fixed to wall with chromium plated brass screw complete all as specified and as directed
Supply and fix Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed
Taking down existing damaged water closet along with complete PCC and lime concrete from sunken floor for providing new EWC / IWC and water proofing treatment to sunken floor as per following stages :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhesive. (iii) Providing cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness for 48 hrs. Note:- EWC/ IWC shall be measured and paid separately under relevant items
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/loose soil complete all as specified and as directed
Removing excavated material to a distance exc. 1.50km and not exceeding 5.00km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed
Material and labour for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and as directed
Material and labour for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces , finished even and fair without using extra cement complete all as specified and directed
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed
Material and labour for hard-core of gauge exceeding 63mm but not exceeding 100mm broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed
Material and labour for TMT (CRS) bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed
All as per item No.56 here in before but for 6mm to 8mm dia TMT(CRS) bars complete all as specified and directed
Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in foundation including rafts footing, plinth beams, base for columns etc and mass concrete complete all as specified and as directed
Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete using steel complete all as specified and directed
Material and labour for RCC M-30 design mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like all as specified and as directed
Supply and fix Mild steel screw bolts (machine made) of dia 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long complete all as specified and directed
Material and labour for preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for 20mm thick granite slab (of any type) work (table rubbed and polished), in steps, jambs, pillars, window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed
Material and labour for 20mm thick granite slab (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including a backing coat of 10mm thick cement plaster in 1:4 complete all as specified and directed Note: Quoted rate shall be inclusive of backing coat
Dismantling expanded metal any thickness or mesh fixed with steel or aluminium frame work, weight not exceeding 4Kg per Sqm complete all as specified and directed Note: The quoted rate shall be inclusive of scaffolding upto 8m height
Supply and fix interlocking aluminium alloy anodized snap grid consists of main Tee runners of size 38mmx25mmx1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mmx25mmx1.5mm (of length 600mm) to be interlocked at the centre 1200mm x 600mm panel to form a grid of 600mm x600mm and wall angle 25x25x2mm, aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 including GI hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed Note: The quoted rate shall be inclusive of scaffolding upto 8m height
Supply and fix PVC coated MS wire netting 2.5mm dia and 25mmx25mm mesh size fixed to snap grid frame work as in bird proofing and securing with sufficient number of 1mm dia copper wire complete all as specified and directed Note: The quoted rate shall be inclusive of scaffolding upto 8m height
Excavating in post holes each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed earth around, in layers n.exc.25cm in soft/loose soil complete all as specified and as directed
Material and labour for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and as directed
Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1161-1998 Fe 410-W(Gde-E- 250) quality- A complete all as specified and as directed
Supply and fix prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Material and labour for preparing new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed
Supply and fix Euro guard pro square UPVC rain water gutter (220mm) with all necessary fitting, clap, joints, end caps, corner drop, centre drop etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed
Excavating over areas, n exc 1.5 m deep and getting out hard/dense type soil complete all as specified and directed
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, over and including 50mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick Add for well ramming including watering as required complete all as specified and as directed.
Material and labour for hard-core of gauge not exceeding 63mm broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed
Material and labour for PCC 1:2:4 , type B0 using 12.5mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings of dia 20mm including all necessary fittings, solvents complete all as specified and directed
Supply and fixing 15mm dia angle valve, quarter turn with flange, brass chromium plated and including fixing accessories for CPVC pipe complete specified and as directed (Make : CERA Model No. F2004201 or equivalent make from the list of makes)
Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to be fixed in 20/15mm pipe, complete all as specified and directed (Make Cera Model No. F8010108 or equivalent make from the list of makes)
Supply and fixing health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe , including taking out old one all as specified and directed (Make : CERA Model No. F8030103 or equivalent make from the list of makes)
Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed
Material and labour for RCC class NP2 pipes of 150 mm dia laid and jointed with collars complete all as specified and as directed.
Material and labour for PCC 1:4:8, type D2 as in concrete bed to drain pipe of dia 150 mm including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
Material and labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) chullah hoods, chajjas,water troughs,mangers, shelvesand similar articles with plain faces set in CM 1:4 including necessary formwork complete all as specified and as directed
Material and labour for provn of RCC hume pipe septic tank for 25 users including necessary excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection, RFR and removal of surplus soil and accessories like vent pipe, manhole pipe etc. all as shown on CE (NW) Kochi TD drawing No. TD/A/157, sheet No.1/1 complete all as specified and as directed.
Material and labour for provn of soakage pit for 25 users as shown on CE (NW) Kochi TD drawing No.TD/A/161 of sheet No. 1/1 complete all as specified and directed. Note for item 86& 87 :- The TD drawing mentioned has not attached with tender documents. These shall be refered at office of GE(NW)Kochi during office hrs.
Taking down old GI/ CPVC pipe of size 25mm complete all as specified and directed
Taking down old GI/ CPVC pipe of size 20mm complete all as specified and directed
Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings of dia 25mm including all necessary fittings, solvents complete all as specified and directed
Taking down old ball valve of size 20/25mm complete all as specified and directed
Supply and fix CPVC ball valve of size 25 mm dia suitable for CPVC pipe including necessary fittings complete all specified and directed
Supply and fix CPVC ball valve of size 20 mm dia suitable for CPVC pipe including necessary fittings complete all specified and directed
Taking down old bib tap, angle valve, pillar taps, self closer, overhead shower and health faucet etc complete all as specified and directed
Supply and fixing of bib tap, CP, quarter turn with flange and aerator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI / CPVC pipe of size 15 mm complete all as specified and as directed (Make : Cera Cat. Part No. F2004151 or equivalent make from the list of makes)
Supply and fixing of bib cock, CP, quarter turn with flange and aerator, fancy type long nose with wall fanged, cast copper alloy with crutch or butterfly handle screwed for GI/civic pipe of size 15 mm complete all as specified and as directed (Make : Cera Cat. Part No. F2004152 or equivalent make from the list of makes)
Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose, all as specified and directed (Make : CERA Model No. F8030102 or equivalent make from the list of makes)
Supply and fix fancy type Pillar taps of bore 15 mm, spout with aerator, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed (Make : CERA Model No. F2004101 or equivalent make from the list of makes)
Supply and fixing 20mm bore concealed stop cock, regular body, quarter turn with adjustable wall flange, chromium plated with CP cup, fancy type complete specified and as directed (Make : CERA Model No. F2002362 or equivalent make from the list of makes)
Supply and fixing CP angle cock, self closers/ pressmatic with wall flange and 200mm connecting pipe for urinal pots to be fixed in 20/15mm pipe, complete all as specified and directed (Make Cera Model No. F9020203 or equivalent make from the list of makes)
Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and as directed (Make : CERA Model No. F7020307 (shower head) & F7040202 (shower arms) or equivalent make from the list of makes)
Taking down old PVC connection complete all as specified and directed
Supply and fixing PVC connection pipe 16mm outer dia, 450mm long cold water complete with PVC union on both sides to suit 15mm pipe, complete all as specified and directed
Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),3 layered, white colour, hoisted & fixed in position of capacity 2000 litres including taking out u/s old tank complete all as specified and as directed
Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),3 layered, white colour, hoisted & fixed in position of capacity 1000 litres including taking out u/s old tank complete all as specified and as directed
Supply and fix float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and fly nut including taking down of old valve complete all as specified and directed. (Make: Prayag Cat Part No. 153 or equivalent make from the list of makes)
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point) complete (fittings such as switches, ceiling roses, pendents, regulators sockets, light fittings etc) removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed
Material and labour for point wiring with 1.5 sqmm PVC insulated unsheathed 1.1 KV grade multistranded copper conductor single core HRFR cable in PVC concealed conduit rigid non metallic (ISI marked) fixed concealed on wall/roof except beam, column and RCC roof including cutting chases and provn of 1.5 Sqmm multi stranded copper conductor cable PVC insulated for earth continuity conductor connected to earth dolly for one light point controlled by 1 one way switch complete all as specified and as directed.
All as per item No 108 here in before but one exhaust fan point controlled by one switch and regulator complete all as specified and directed
All as per item No. 108 here in before but for one socket 5 pin 5 Amp controlled by one switch on independent board complete all as specified and directed
All as per item No 108 here in before but point wiring with 2.5 sqmm for 15 Amp socket point on independent board with 2.5 sqm copper conductor multi stranded cable as earth wire complete all as specified and directed
Supply and fix Modular switch, 1way ,6A,1 module complete all as specified and directed
Supply and fix Modular switch, 1way ,16A,1 module complete all as specified and directed
Supply and fix ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed
Supply and fix modular socket,6A,2/3 pin combined 2 module complete all as specified and directed
Supply and fix modular socket,16A,2/3 pin combined 2 module complete all as specified and directed
Supply and fix 4 feet surface mounted batten type 20W LED luminaire with emergency light output shall be maximum 4 hours battery back up in case of power failure with Li battery, luminaire efficiency 100 Im/w with an operating voltage from 140V-270V, initial lumen at battery mode will reduce to 35-50%, charging time appx 8-12 hrs. The luminaire shall have aluminium extruded main housing and PC LED front cover. The luminaire shall have a CCT of 6500K, CRI>80. Power factor hours as per L70 B50 criteria. The luminaire shall be EMI/EMC complaint and shall have open and short circuit protection, reverse polarity protection, internal surge protection of 30KV IP 20 ingress protection complete all as specified and directed Make: Halonix model No. HLB-08-20-CW-INV or equivalent model of other manufactureres from the list. Notes: (a) LED chip make shall be Nichia, Osram, Cree, Lumilid, Seoul semi conductor (b) The Contractor shall submit LM-80 and LM-79 report from NABL approved lab for chip used and luminaire to Engineer-in-Charge before getting the sample and material approved (c) The Contractor shall also submit test report from the manufacturer to comply with all requirements and specifications given in the Contract. (d) The Contractor shall submit warranty certificate from manufacturer for minimum 2 years
Supply and fix LED tube light fitting 20W DAWN PLUS, smart extruded aluminium LED batten(4 feet) with high efficiency, microwave sensor to save more energy reduces the light by 70% during non occupancy complete all as specified and directed (Make: Bajaj Cat Part No.BCLAB 20W LED PS or equivalent make from the list of makes)
Supply and fix exhaust fan AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvers, metallic body including connecting up with twin core twisted flexible copper conductor, including taking down old exhaust fan and deposit to MES store yard complete all as specified and directed (Make: Havells Turbo force SP or equivalent make from the list of makes)
Supply and fix exhaust fan AC single phase 230/240V of size 450 mm sweep, 1400 RPM with louvers, metallic body including connecting up with twin core twisted flexible copper conductor, including taking down old exhaust fan and deposit to MES store yard complete all as specified and directed (Make: Havells Turbo force SP or equivalent make from the list of makes)
Taking down old unserviceable DB of any size complete all as specified and directed
Supply and fix Sheet metal enclosure for MCB DB SPN 4 ways, double door, 240V complete all as specified and as directed
Supply and fix in repairs MCB, SPN, 40 Amps, 240 Volt, B curve, having breaking capacity 10 KA complete all as specified and as directed. Make L&T Cat Part No. BB20400B or equivalent make mentioned in the list of makes
Supply and fix in repairs MCB, SP, 6-32 Amps, 240 Volt, B curve, having breaking capacity 10 KA complete all as specified and as directed. Make L&T Cat Part No. BB10060B to BB10320B or equivalent make mentioned in the list of makes
Taking down old sub main wiring of any size complete all as specified and directed
Material and labour for sub main wiring with 2 runs of 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm cable as earth continuity wire and including suitable PVC conduit concealed in wall/floor including cutting chassis except beam and RCC roof and making good disturbed surface to match with existing surface. ( Note : 3 runs of 4 sqmm cable and one run of PVC conduit shall be measured as one unit length)
Taking down old earthing of any type complete all as specified and directed
Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with to edge of the plate not less than 1.5mtrs below normal ground level connected to galvanised earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified and indicated including testing on completion. Note: The rate is deemed to be inclusive of the cost of earth work, excavation on any type soil and removal of surplus soil to a distance of 50 mtr, PCC 1:3:6 type C1, RCC cover in 1:2:4 typeB1, GI pipe light grade 15mm size as protection pipe for GI wire from earth plate electrode to main switch board provided GI pipe 20mm medium grade for watering including funnel, wire mesh etc
JESWIN BUILDERS
WELTRONENGINEERINGSERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .