Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC | L1 | Accepted-AOC Accepting being L1 | |
| 2 | L2₹46.5 L+₹1.9 L (4.19%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹48.6 L+₹4.0 L (8.85%)Rejected-Finance C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
29 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY NO. 1 JODHPUR
GE ARMY NO. 1 MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO BLDG NO P-145 (ASSAULT TEAM) IN ARMY AREA OF AGE B/R-II UNDER GE (A) NO 1 JODHPUR.
2023_MES_635117_1
GE/JODH (A) NO 1- OF 2023-24 (9217/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
₹96,000
Yes
26 Feb 2024
30 Dec 2023
6 Feb 2024
30 Dec 2023
29 Jan 2024
15 Jan 2024
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris to out side MD land complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any description and in any position not otherwise specifically provided for including removal of debris to out side MD land complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), to receive floor finishes, complete all as specified & directed.
M&L for 15 to 18 mm thick udaipur green stone slab, as in cooking plateform/ WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
M&L for light shade vitrified ceramic tiles, 9-10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per item No. 6.00 here-in-above, but as in skirting / dado/ verticle surfaces, over & including M&L 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 400X400X6 to 7 mm thick (square), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L Machine cut kota stone slab 20 to 25mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 20mm thick screed bed in CM 1:6, complete all as specified and as directed.
All as per item No. 10.00 here-in-above, but as in skirting / dado/ verticle surfaces (single piece for steps), over & including M&L 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L for 15-18 mm thick Yellow Jaislmer stone as in floor, steps/risers/skirtings etc., over & including 15 mm thick rendering in CM 1:6 complete incl mirror polishing, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, complete all as specified and as directed.
Taking down cement plaster on stone masonry, RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed. Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.
Rendering 10mm thick in cement mortar 1:4 on concrete ceiling surfaces / sunsheds / facia / RCC chajja, finished even and smooth without using extra cement, complete all as specified and directed. Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.
M&L for applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
M&L for complete removal of existing treatment and applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
All as per item No. 18.00 here-in-above, but as in ceiling
All as per item No. 19.00 here-in-above, but as in ceiling
M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer, complete all as specified & directed
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of cement base paint on wall, complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.
Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.
S&F factory made box type windows (steel) (BWM) with side hung shutter with or without cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Note : (i)-Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii)- Guard bar, Glass panes & wirecloth shall be measured and paid seperately.
All as per item No. 31.00 here-in-above, but without glazing bars
S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed.
All as per item No. 33.00 here-in-above, but without glazing bars
M&L for rolled mild steel sections like Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.
M&L Pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
M&L Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, , complete all as specified and as directed. Note : Stainless steel butt hinges and necessary SS screws shall be measured & paid separately.
S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.
M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
M&L pre powder coated coloured aluminum anodized door frame (minimum thickness of powder coating 50 micron) and shutters for door/windows, etc or as approved by GE including jointing cleats for fixing etc as per manufacturers instructions complete all as dire+2051:2061cted. Note : (i) Weight of all aluminum members shall be measured(ii) Hinges, handles etc shall be measured and paid separately. (iii) Glass pan and rubber beading shall be measured and paid separately. (iv) Fixing of shutters with fittings shall be as per manufacturers instructions.
M&L for Pre powder coated (powder coating min 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) ,complete all as specified and as directed.
M&L powder coated (colour as approved by GE) anodised aluminium shutter (minimum thickness of powder coating 50 micron) for door, aluminium section weighing 0.55 kg/m, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, screws etc., complete all as specified and as directed.
M&L for Pre- powder coated (powder coating min 50 micron) aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators,complete all as specified and as directed.
S&F for 5.5 mm thick tinted glass & glazing with rubber beading & Al clipping in square n exc 0.50sqm in each pane, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed, complete all as specified and directed.
S&F in mortice latch with two loovers (Vertical type) mild steel body 100mm long and fixed ,complete all as specified and as directed.
M &L in repairs for fabrication of pressed steel cupboard shutters, using 1.00 mm thick MS plain sheet & frame 1.25 MM thick, bent to shape, including applying two coats of synthetic enamel paint on tint surfaces over & including M&L for two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc., including taking down old exisiting shutter, complete all specified and directed.
S&F in repairs brass mortice lock, vertical type with 2 keys, 100mm size, 4 levers complete all as specified and as directed.
M&L for repair to pressed steel cupboard shutter and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition as per directon of Engineer -in -Charge .
S&F in repair 18 /19 mm thick pre laminted particle board exterior grade prelaminated both sides and decorative choice fixed for kitchen cupboard and shelving, complete all as specified and directed.
Supply only 3 mm thick teak wood lipping 19 mm wide complete all as specified.
S&F decorative lamination type 1 of surfaces finishes, 0.9 mm thick sunmica pasted on (colour and pattern as approved by GE) with suitable adhesive as per manufacturer instruction all as directed by GE/EIC.
Supply only continuous [piano] hinges, mild steel, bright finish or electrogalvanised and width of Flaps 40mm [When Open] complete all as specified and as directed.
Taking out from position framed wood work as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60cm, complete all as directed.
S&F 75mm long powder coated aluminium anodised barrel tower bolt, fixed to Al window & door, complete all as specified and as directed.
S&F 75mm long powder coated aluminium anodised handle, fixed to Al window & door, complete all as specified and as directed.
S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters
S&F in repairs brass mortice lock, vertical type with 2 keys, 75mm size, 4 levers complete all as specified and as directed.
S&F of stainless steel butt hinges 100mm size, include screws or bolts, nuts and washers to match the butt hinge, complete all as specified and as directed.
S&F of aluminium anodised, tower bolt 200 mm long complete all as specified and directed.
S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified and directed.
S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and directed.
S&F 150mm double action spring hinge, brass with phosphorus bronze wire spring bright polished complete all as specified and directed.
S & F and in repair for 125mm long, mild steel single action spring hinge all as specified and directed.
S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 150mm long complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F for 4 mm thick figurred, pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.
M&L for Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and apply two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed .
M & L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .
M&L for preparation of new or previously untreated wooden surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L a coat of pink primer complete all as specified and directed.
Taking up or down 15/20mm bore steel tubing/CPVC PIPE, fixed to wall/ceiling or laid in trenches/floor and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.
Taking up or down 25mm bore steel tubing/CPVC PIPE, fixed to wall/ceiling or laid in trenches/floor and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.
Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.
All as per item No. 78.00 here-in-above, but size 25 mm bore
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.
S&F in replacement of bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repairs of chromium plated swivel joint shower rose of 100 mm dia, brass fixing with 15mm bore pipe, with Shower aRM 15 mm size, 195mm long with bend of 45degree with flange, complete all as specified and as directed
S&F in replacement angular stop cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.
S&F in repairs stop valves 20/25 mm dia, cast copper alloy with capstan head, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.
S&F in repairs Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.
S&F in repairs two way way angle bib cock chromium plated brass body, (Nickel 10 microns and chrome 0.3 microns) fancy type 15 mm bore /size, complete all as specified and directed.
5 - 6 mm thick high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed
M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.
M&L for 110mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.
S&F in replacement stainless steel single Towel rail 600mm long, complete all as specified & direceted
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
S & F in repairs vitreous china ware wash hand basin, white, flat back of size 450 mm X 300 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, complete all as specified and as directed.
S & F in repairs vitreous china ware wash hand basin, oval type, Ivory, Brand-I category, complete all as specified and as directed.
S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.
S & F in repairs white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.
S & F in repairs vitreous china bowl urinal flat back, size of 465x355x265mm white(minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2,securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.
S & F in repairs URINAL spreader PTMT any colour, complete all as specified and as directed.
S & F in repairs liquid soap container, complete all as specified and as directed.
S & F in repairs toilet paper holder viterous china complete all as specified and as directed.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100/110mm bore, complete all as specified and as directed.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and as directed.
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall/ceiling/floor of suitable size complete all as specified and as directed .
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall/ceiling/floor of suitable size complete all as specified and as directed .
S&F 75 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and as directed.
S&F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and directed.
S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and directed
S&F in replacement 10 ltrs capacity PVC valve less(Super special colors), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed.
S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.
S&F in replacement 15mm bore PVC connection for Flushing cistern 600 mm long best quality with PTMT nuts, complete all as specified and as directed.
S&F in replacement Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia complete all as specified and as directed.
S&F in repair PVC Jet with flexible tube complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs CP mild steel grating 100mm dia, including jointing with solvent cement complete all as specified and as directed.
S & F in repairs CP mild steel grating 75mm dia, including jointing with solvent cement complete all as specified and as directed.
S&F in repair MS chromium plated peg set of five fixing with wall complete all as specified and directed.
S&F in repair soap dish of viterous china fixed with screws complete all as specified and directed.
Disconnecting existing tanks setting aside [or lowering if required] for repair,cleaning etc., and hoisting if required reconnecting and refixing in position of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed.
S&F Rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed.
All as per item No. 120.00 here-in-above, but tank capacity 1000 ltrs
M&L for machine cut sand stone slabs, 7.5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.
M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed.
M&L for machine cut sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.
Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where as directed.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction.
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
S&F in repair plain, aluminium sheating, alloy 31000H4 in ridges, hips, valley, gutter drip and straight flushing, covering over crumple joints etc. fixed with screws and bitumen washer complete all as specified and as directed by Engineer-in-charge.
Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.
M&L precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in solid block masonry, 10cm width and setting in cement mortar 1:4complete all as specified and as directed .
M&L plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in roof kerbs or mud steps, rounded or chamfered on edge, complete all as specified & directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, complete all as specified and directed.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-30 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc., and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
S&F in replacement TMT bars 12 mm dia fixed by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc ,complete all as specified and as directed.
M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed.
M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc,complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed.
M&L for RCC M-25 design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC M-25 design mix as in beam lintel band plinth band and the like complete all as specified and directed.
M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L TMT steel bars of 5 to 10 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L for Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified and directed.
Supply, laying, testing & commissioing of 150 mm bore reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete all as specified and as directed .
Material and labour for Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate as in bed to150 mm bore drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soils complete all as specified and directed.
Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
M & L for Aluminium snap grid frame work of 605 X 605 mm panel size for false ceiling along the Walls suspended with, including taking down old exisiting false ceiling, complete all as specified and as directed.
S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)complete all as specified and as directed.
S&F in replacement Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including taking down old existing lining all as specified and directed.
M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distemper over & including M&L a coat of wall / ceiling care putty including taking down old existing ceiling, complete all specified and as directed.
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets,fittings etc., removing materials to store for keeping in safe custody or for taking credit and including cutting, chasing, pinning & making good disturbed surfaces of walls,floors, etc, complete all as specified and directed by Engineer-in-charge.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed by Engineer-in-charge.
Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including cutting , chasing, pinning & etc., and making good of disturbed surface as per existing with heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed . Note:- surface conduit shall be laid in ceiling portion only.
All as per Serial Item No.166.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Serial Item No.166.00 here-in-above but for one 3 pin socket outlet 5/6 Amps on the independent board with other switches.
All as per Serial Item No.166.00 here-in-above but control by two way switch
All as per serial Item No.166.00 here-in-above but for 3 Pin 16 Amps socket outlet on independent board with 4.00 Sqmm cable
S&F flush type Switch 1 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F flush type Switch 1 way, 16 Amps, 1 module, 230 Volts complete all as specified and as directed.
S&F flush type Socket, 6 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F flush type Socket, 6 /16 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.
S&F two way switch 5 Amps, complete all as specified and as directed.
S&F socketed stepped type fan step regulator, complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fitting, INCLUDING 9W LED Lamp complete all as specified and as directed.
S&F flush type Ceiling rose, surface bakelite, 3 terminal, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.
Supply & replacement of LED light fitting, T5 batten, designed liner sleek aeshthetic PVC housing ( integrated driver), ensured soft glare lightiing wide angle of 120 degree, upto 110Lumen/watt, 6000K colour temp, 4 feet long of 20 watt ( PC) fitting, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply & replacement of LED light mirror type with high diffuser, 2 feet long of 10 watt ( PC) fitting, including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement bldg security LED Light Luminaire of 35/36 Watts having IP 66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 160-260 Volts with in built surge protectore, toughened glass with and including GI pipe 20/25mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and directed.
Supply & replacement of LED light fitting 1 X 10W bulk head luminaries, with lamp holders with all accessories including 10 W LED bulb including taking down old fitting c including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and directed.
Supply & replacement of LED light fitting 1X10W mirror surface mounted, decorative ovaldge- lit LED luminaries comprising of high brightness LED's etc., complete with all accessories and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed
Taking down ceiling fan, any size and sweep from its position and refixing same, connecting up including provision of cable from ceiling rose,complete all as specified and as directed .
S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar, SPN 8 way, 240V, IP-43 Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar, SPN 12 Way, 240V, IP-43 & IK 09Protection, duly fixed in concealed in wall including cutting chasing pinning, and making good, suitable for for fixing MCB's complete all as specified and as directed.
Supply, fixing, testing and commissioning SP 5 to 32 Amps 240V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
Supply, fixing, testing and commissioning SPN 63 Amps 240V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
Supply, fixing, testing and commissioning SPN 40 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
M&L submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSH PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including cutting chasing in wall for concealed using machine cutting and making good and including M&L 25mm dia non mettalic PVC rigid conduit with wall thickness not less than 1.8 mm, accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.
M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35Sqmm 3.50 core including taking out old unserviceable cable if required., complete all as specified and as directed.
Supply and filling dry clean sand (tibba sand) in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed . Note :- Punned thicknes only shall be measured for the purpose of payment.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 300 mm x 180mm x 40mm complete laid over the cable perpendicular to the cable for protection, complete all as specified and as directed.
Supply and fix in replacement of GI tubing of size 40mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed.
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A to 160A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed. Note:- MCCB's and MCB's measured and paid seperately.
S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75% 25 kA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, suiatble for item No.124.00, (ISI marked), as in repairs, complete all as specified and as directed.
S & F in replacement ceiling fan 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rating, brushless direct current motor (BLDC), suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed. .
Supply,testing and installation in replacement electric storage geyser of capacity 25 Ltrs, BEE 5 star rating, 230Volts, AC, 50Hz, comprising of heating element 2000 watt, storage type steel body with copper tank, puff insulation,both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 788mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as required inclduing all necessary plumbling works and civil works complete all as directed and as specified.
S&F in replacement heavy duty exhaust fan, steel body, AC single phase 300 mm sweep, 900 RPM, complete with frame & louvers, connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed.
S&F LED Warm White light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge
Taking down unserviceable exhaust fan of any make, type and sweep by disconnecting electric connection and depositing in MES store yard complete all as per direction of Engr-in-Charge.
S&F PVC Exhaust fan 300mm sweep, 1000 RPM, including louvers with cutting chases on brick wall and grouting with nut bolts/fasteners complete all as per directed by Engr-in-Charge
S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.
S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.
S&F MCB DB, SPN, (double door), 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed by the Engr-in-Charge.
M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size including all conduit accessories & fittings / junction boxes / inspection covers etc, with and including cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable including one run of conduit pipe will be measured as one length including making good the disturbed surfaces.
S&F Sheet metal enclosure, SPN with a two pin earth plug and socket with metal clad top and one MCB,SP, 20Amps capacity complete all as directed by Engr-in-Charge.
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work.
JB INFRA
SNEH CORPORATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .