REPAIR TO STREET LIGHTS SECURITY LIGHTS AND SEARCH LIGHTS ALONG WITH CONNECTED WORKS UNDER PHASE I AT MASIMPUR UNDER GE SILCHAR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed

Supply and laying burnt bricks of sub-class 'B' of size 230x115x75mm laid in trenches for cable protection complete all as specified and as directed

M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

Supplying, fixing / laying steel water tubing, 40mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables including taking out and disposing off old damaged tubing complete all as specified and as directed

Taking down high pressure SV/MV/MH/FT/LED street light fitting anf flood light fittings of any wattage/any height of pole/walls/any location for repairs or replacement of burnt out accessories and rectifying the fault, complete all as specified and as directed.

Taking down high pressure SV/MV/MH/FT/LED street light fitting anf flood light fittings of any wattage/any height of pole/walls/any location for replacement, complete all as specified and as directed.

S&F LED street light 45W with 10kV SPD, pressure die cast aluminium housing with polycarbonate cover and high power LEDs and secondary lenses with IP-66 protection having efficiency > 110 LPW , mounting on existing bracket with all fixing arrangement as required on any size of pole , complete all as specified and as directed

S&F LED street light 70W with 10kV SPD, pressure die cast aluminium housing with polycarbonate cover and high power LEDs and secondary lenses with IP-66 protection having efficiency > 110 LPW7, mounting on existing bracket with all fixing arrangement as required on any size of pole, complete all as specified and as directed

S&F LED street light 100W with 10kV SPD, pressure die cast aluminium housing with polycarbonate cover and high power LEDs and secondary lenses with IP-66 protection having efficiency > 110 LPW /125LPW, mounting on existing bracket with all fixing arrangement as required on any size of pole , complete all as specified and as directed

S&F 100W LED flood light fitting, pressure die cast aluminium housing with heat resistant toughened glass, IP-66 protection having efficiency >110LPW luminaries with impact and corrosion , complete all as specified and as directed

S&F 150W LED flood light fitting, pressure die cast aluminium housing with heat resistant toughened glass, IP-66 protection having efficiency >110LPW luminaries with impact and corrosion resistant ,complete all as specified and as directed

Supply only drivers for LED street Lights 45W/60W, 230 volts,50Hz to carry out repair/replacement of old unservicable drivers ,complete all as specified and as directed:

Supply only drivers for LED floodsLights 90W/120W, 230 volts,50Hz to carry out repair/replacement of old unservicable drivers ,complete all as specified and as directed:

Supply only drivers for LED floodsLights 150W/200W, 230 volts,50Hz to carry out repair/replacement of old unservicable drivers ,complete all as specified and as directed:

Supply only Surge protection devices 10kV suitable for LED street light of different wattage / makes to carry out repair/replacement of old unservicable drivers ,complete all as specified and as directed:

S&F digital time switch with battery backup of 1100hrs (minimum) with current capacity 16A, programmable every 1minute with 1 changeover and total 28 programme including taking off old unserviceable switch and disposing off compete all as specified and as directed

S&F digital type time switch with distribution board 32A, 3 pole, 230V including taking off old unserviceable switch and disposing off compete all as specified and as directed

S&F power contactor ML-2, 32A 415V, 50Hz AC,3 Phase heavy duty, suitable for control panel/ AMF panel including taking off old unserviceable power contactor and disposing off compete all as specified and as directed

S&F power contactor ML-3, 40A 415V, 50Hz AC, 3 Phase heavy duty, suitable for control panel/ AMF panel including taking off old unserviceable power contactor and disposing off compete all as specified and as directed

S&F HOT moulded (FRP) junction box for street light pole with locking arrangement with IP-66 protection of size 250x200x160 with 32 Amp 4 way heavy duty terminal block with 01 Nos of 10 Amp MCB SP with two steel bracket to fix pole , complete all as specified and as directed.

Supply, laying, jointing, connecting and testing XLPE insulated PVC sheathed cable 4 core 16sqmm, 1100V grade, screwed PVC bedded, armoured electric power cable, heavy duty multi-stranded aluminium conductor laid in trenches / fixed on walls/poles, passing through pipes, etc. including connecting up to DBs, etc. with required lugs, end terminal / cable glands including taking up/down old unserviceable cable and disposing off complete all as specified and as directed of the following sizes: Note: Excavation and earthwork will be measured and paid separately under respective item herein

Supplying, fabricating and fixing bracket suitable for hanging light fittings in 40mm bore GI tubing, light grade, cut and bent to shape required, 1.5m long, flat iron clamp made of FI 40x6mm, nuts, bolts, washers, etc. duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer including taking out old damaged brackets and disposing off complete all as specfied and as directed

S&F in repairs MS clamps fabricated out of MS flat iron 25x4mm cut to size and bent to shape as required for fixing 40mm bore pipes complete all as specified and as directed

S&F in repairs non-metallic rigid PVC conduit 20mm bore with accessories complete all as specified and as directed

S&F in PVC insulated PVC sheathed cable with stranded copper conductor of size 1.5 sqmm, 3 core,1100 volts grade ,complete all as specified and as directed

MS AFTAB LASKAR (BID ID -3301570)

M/S LUIT CONSTRUCTION (BID ID -3300808)

M/S TAPAN KUMAR RAY (BID ID -3300541)

m/s builders and suppliers (BID ID -3301416)

M/S SANJIB DEB (BID ID -3301567)

SURANA CORPORATION (BID ID -3301085)

M/S M P Sharma (BID ID -3301401)

Bhuiya Construction (BID ID -3299775)

M/S SUBHAM ENTERPRISE (BID ID -3301642)

Anup Kumar Paul Choudhury (BID ID -3302209)