Repair_crane_Point-C

Amount

Supply, delivery and fitting of Indef-P brand 10 MT capacity tripple spur gear chain pully block fitted with load chain as per IS : 6216 having 15 Mtrs lift.

Servicing and overhauling of existing 10 ton capacity gear trolley alongwith LT drive arrangement comprising of reduction gear and pinion, LT wheel and pillow blocks. Also provide a chain holding bucket at ground floor man height level pillar side to hold the load chain and hand chain of the CPB duly covered when not in use. This will prevent fast corrosion of the chain.

Supply and delivery of Double door type outdoor LPBS(for 5 nos pump) Having following specification:- 1. ON Indicator (Green) LED type, 230V AC…......5 nos. 2. OFF Indicator (Red) LED type, 230v AC…..........5 nos. 3. Trip Indicator (Amber) LED type, 230V AC............5 nos. 4. Start Push Buttam(22.5 mm) with 1 NO contact.........5 nos. 5. Emergency Stop buttom (40 mm) with 1 NC Contact.........5 nos. 6. 96 mm x 96 mm Digital Ammeter CL-1............5 nos. 7. 2.58 sq mm Control Terminals...........as required.

Fitting fixing of above supplied LPBS under Shed with making a MS structure for it installation including all cable connection after dis connection of existing cable from existing damaged LPBS and re-orientation of existing cable from existing LPBS to new LPBS all completed by supplying all fixing materials such as cable gland,socket, screws, nut-bolts, washers, cable tie, pvc tape, printing ferrule, etc. and testing the same as per & upto the entire satisfaction of EIC.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS : 226, IS : 808 & SP (6) - 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS : 816 -1969 & IS : 1995 using electrodes of approved make and brand conforming to IS : 814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. (3m x 5m x 2m ht.)

For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg / m

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor)

In Roof with 0.80 mm thick sheet.

In Wall with 0.80 mm thick sheet.

Painting of above structural of Shed and LPBS with 2 coats of Synthetic Enamel paint over 1 coat of Red Oxide primer and making civil works of MS structure all complete as per direction of EIC.

GST @18% of Total Value in Amount

CESS @1% of Total Value in Amount

WEST BENGAL ENGINEERING CO. (BID ID -5879400)

ORIENTAL ENGINEERING CO. (BID ID -5880651)