CERTAIN REPAIR TO ROOF SHEETS TILING TOILETS BATHROOM AND COOK HOUSE OF OTM ACCN AT PALAMPUR MIL STN UNDER GE PALAMPUR

Amount

Taking down shutters of any description not exceeding 1.00 Sqm and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F 1st class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles n.exc 200 Cu.cm each complete all as specified and as directed.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay dovetailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to flat iron 40x5mm frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. including painting and dismantling all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified.

S&F 3mm thick transparent fibre glass, ordinary quality as in glazing n exc. 0.5 sq.m in each pane fixed in wood steel frames with oil putty or wooden beads or self tapping screw complete all as specified and as directed.

S&F 3mm thick transparent fibre glass, ordinary quality as in glazing n exc. 0.5 sq.m in each pane fixed in wood steel frames with oil putty or wooden beads or self tapping screw complete all as specified and as directed.

S&F 6mm thick E-board (Classic) false ceiling of size 610mmx610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25mm at the perimeter, including 40mm GI adjustable suspender of required length, including dismantling old ceiling, including dismantling complete all as specified and directed.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

Dismantling timber scantlings like fillets,rails, posts,rafters,purlins,etc under 40Sq.cm in section, in any position complete all as specified and directed.

M & L second class soft-wood clean sawn fixed in repairs,scantling for wooden posts/purlins complete all as specified & directed.

Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Rendering 15mm thick plaster using WPC on brick work or concrete surface or other than fair faces of brick masonry in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and directed.

Rendering 10mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and directed.

Rendering 10mm thick plaster on ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

M&L preparation of old plastered ceiling surface and applying two coats of white wash, complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surfaces over two coat of wall putty complete all as specified and directed.

Preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on old surface over two coat of wall putty complete all as specified and directed.

Dismantling water tanks exc. 250 ltrs but not exc 500 ltrs capacity and removing to store complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course of flooring & roof complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubblish off the premises complete all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles complete all as specified and directed.

Dismantling of stone slabs,paver blocks and tiles of any description or thickness in floors,path apron etc laid dry or laid dry and pointed surface complete all as specified and directed.

M&L granite of any type 15 to 20mm thick laid over and including 15mm thick screed bedding layer in CM 1:6 machine cut, bedded and jointed with grey cement slurry and pointed with cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S&F vitreous chinaware squatting pan, 'Orissa pattern' size 580mm x 440mm, with cast iron 'P' or 'S' trap, front or back inlet, integral foot rest with provision of PCC M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe etc and making good to floors to match existing, in repair, complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) EWC white connected to drain or out going pipe and flushing pipe complete as in repair including PVC sheet cover closed recessed type with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32mm dia PVC flushing pipe and 15mm dia, 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.

S&F in repairs health faucet (ABD body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs vitreous china wash basin, white oval type centre top size 550x420mm excluding taps, waste, chain and plug and porcelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand incl waste pipe complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type white of size 400x590mm with integrated spreader (excl flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs stop valve/angle valve, fancy type, cast copper alloy, chromiun plated, screwed down, high pressure, with quarter turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs CP soap dish complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of CP any colour, fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 32mm waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F in repairs old steel tubing medium grade 15mm bore and connection in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F in repairs old steel tubing medium grade 20mm bore and connection in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

S&F PVC waste pipe 32mm or 40mm dia 1000mm long for WHB/sink complete all as specified and directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.

Dismantling CI/PVC pipe of any dia bore fixed to wall or laid in floor or trenches including connection complete all as specified and directed.

S&F in repairs PVC soil waste pipe 110mm bore single socketed, in any length with rubber ring joints, fixed in wall with clamps etc. complete all as specified and directed.

S&F PVC soil waste pipe 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors with clamps etc. complete all as specified and directed.

S&F PVC soil waste pipe 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors with clamps etc. complete all as specified and directed.

S&F in repairs PVC soil waste pipe 75mm bore single socketed, in any length with rubber ring joints, fixed in wall with clamps etc. complete all as specified and directed.

S&F PVC diminishing pieces or taper bends any radius 75mm bore with access door complete all as specified and directed.

S&F PVC branch pieces double Tee equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC branch pieces double Tee equal or unequal 75mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore dia, complete all as specified and directed.

S&F 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

M/S MANISHA BUILDERS (BID ID -3194948)

BHARDWAJ BUILDERS (BID ID -3187949)

S R CONSTRUCTIONS (BID ID -3195131)

M/S PARVEEN ENTERPRISES (BID ID -3193640)