RSV_Furniture

Amount

Interior furnishing & furniture

Metal grid ceiling : Providing & fixing ceiling as per approved make list : Galvanize Steel Sheet 585 x 585mm / 1185 x 585mm are made from 0.5 mm TCT Galvanized Steel as per IS-513 coil / powder coated on a continuous paint line with flange on each end, which lay on exposed "T" grid. tiles shall be easily removed without the aid of special tools. Paint Detail: Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface. Panel surface shall be 585 x 585mm / 1185 x 585mm for 15mm T grid (type B). Installation: To comprise, Main runners spaced at 1200mm centers securely fixed to the slab / truss by means of roll plug and 4mm dia. GI rod at 1200mm maximum centers and not more than 150mm from spliced joint. the last hangers at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm cross Tee & 600mm cross Tee to be interlocked between two main Tees to form frid of 600x600mm. panels are than placed individually on the 600 x 600mm exposed grid framework created by Tees. Edge profile: Edge profile shall be L-shaped, roll formed out of 0.5mm Galvanized steel strips with coil coating or powder coating in standard colours. Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs .

Laminate paneling: Providing & fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS 5509:2000 fixed on frame work finish with 1 mm thick laminate. The frame work shall be made from square hollow aluminium anodised section size of 50x50x1.5 mm & 25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically @ 600 mm c/c & horizontal 1200 mm c/c horizontally. All ply/wooden shall be treated with anti- termite treatment . Measurements for paneling work to be recorded upto finished false ceiling level only irrespective of aluminium frame work, which shall be provided from gr. level to RCC slab / beams soffit level. Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making grooves between wall & board, in filled with termite treated wooden members if required or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finished with the same material. Work complete including all type of material,CNC , Engraving, fittings, fixtures, Finish, loading, unloading, transportation, all leads, accessories, groove,adhesive ,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications & instruction of Client/EIC. only the clear elevation area shall be measured and paid. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate.

Accoustic Panelling : 9 mm thick Board - Providing and fixing wall acoustical panelling with using CS55 and IC91 framing directly to the wall and then fixing 12.5mm perforated board with the help of screw and using rockwool of 50kg density and 50MM thick between framing and perforated sheet then Fixing Ecotone make Marco polyester fiber acoustic wallpaneling with the specification of 9MM thick having density of1.90kg/m2 with NRC value of 0.80 surface matt finish which is fixed with solution SR505 asrequired. The panel should have euro class BASTME84-13 fire rating. The color shade of Panel as approved by Architect. Including all accessories, material & labor complete as directed by Engineer. Including surface preparation, Including cost of all type of tools, tackles, all labour, scaffolding, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift etc. etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. Only the clear elevation area shall be measured and paid.

Gypsum panelling: The M/F wall lining includes 12.5mm Gyproc® Quattro Gypsum Board, screw fixed with drywall screws of 25mm at 300mm centers to one side of 45X18X0.5mm Gypliner ceiling channel (0.5mm thick having 18mm flange each made of GI Steel) placed at 600mm center to center in 195X29.5X0.9mm fixing bracket at 900mm c/c with 25X25X0.5mm Gypliner angle at bottom and top of the channel such a manner that joints staggered to avoid leakage through joints. Fixing strip of 75X0.5mm should be installed at horizontal joint of boarding. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound and Joint Paper tape. 50mm Glasswool of density 20kg/m3 should be placed in metal frame.Necessary fabrication with anticorrosive paint work , scaffolding, anchor fasting , bolting HILTI or equivalent make with testing certified in scope of contractor)Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. Panelling item including openable shutter wherever required area and finish with the same material. Only the clear elevation area shall be measured and paid.

Digital Wall paper : Providing and Fixing of PANKO Digital Artwork Custom Printed on Durable Polymeric Vinyl Media with Protective Matt Overlaminate, Printed on HP Latex as approved by Architect, suitable for Direct Application on POP finish, ceilings, elevator doors, partitions, pillars, aluminum cladding etc. Work complete including all necessary fittings , Design approval from architect, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Basic rate of wallpaper is Rs. 330 / Sq.ft

Canvas Artwork : Providing and Fixing of PANKO Canvas Artwork Custom Printed with Durable and Wrinkle Resistant Fabric of 180 GSM ,Printed on HP Latex 700 with 600 dpi to produce saturated colours as approved by Architect. Work complete including all necessary fittings , Design approval from architect, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Basic rate of wallpaper is Rs. 410 / Sq.ft

Canvas Artwork : Providing and Fixing of PANKO PVC Canvas Artwork Custom Printed on 160GSM Media, Printed on HP Latex 700 with 600 dpi to produce saturated colours as approved by Architect.Work complete including all necessary fittings , Design approval from architect, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Basic rate of wallpaper is Rs. 300 / Sq.ft

Soft Board : Providing and fixing on wall 12mm thick approved quality soft board with cotton cloth/fabric of approved make and shade on 12mm thick IS 710 ply 50 mm th approved Glass wool sheet with PVC grip , as approved sample and as directed by EIC. The work shall be measured & paid in Sqm. for all floors, all level and at all heights including all costs .Only the clear elevation area of the cloth/fabric shall be measured and paid. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC.Basic rate of cotton cloth /fabric for 54" wide shall be Rs. 200/Rmt.

Reception Table: @ 1500 x 750 x 1050 mm Providing and fixing Reception table unit consist main table with pedestal unit with all necessary accessories keyboard, CPU stand , cable manager, etc with all required necessary accessories. Table Front panel top: 15-18 mm thick simpolo stone envelope with ply structure finish & 1 mm thick Laminate finish. work complete as per detail drawing Working Desk Top: 25 mm thick top made from 303 BWR ply with laminate finish. Verticle support: As per detail drawing and reference image made from 25 mm thick IS 303 BWR ply with Laminate finish. providing and fixing as per requirement of socket and quantity Pop up tabletop electrical WIRE MANAGEMENT BOX SS finish. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives consumable hardware & required SS 304 grade ardware/accessories, grooves pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Equivalent to VNR Series Laminate. Basic rate of stone is 250 / Sq.ft

Book Issue Table With Backstorage : 4850 mmmx 750mmx 750mm " ------Do -----------" as per above item specification for complete work .

Continous Seating : Providing and fixing as per requirement seating base Comprising of Solid teak wood frame PU matt finished polish. The seat & back shall be in high density PU foam with leather fabric finish & finished in Approved fabric upholstery & back - back side finish with ply 303 & veneer finish /with SS leveler as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU matt finish polish. The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item description. As approval of architect. Basic Rate of veneer : 120 Sq.mt. Basic Rate of Fabric : 800 R.mt

Curved Sofa with back book Storage Unit (Height 900 mm) Providing and fixing as per requirement seating base Comprising of Solid teak wood frame PU matt finished polish. The seat & back shall be in high density PU foam with leather fabric finish & finished in Approved fabric upholstery & back - back side finish with ply 303 & veneer finish /with SS leveler as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU matt finish polish. The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item description. As approval of architect. Basic Rate of veneer : 120 Sq.mt. Basic Rate of Fabric : 800 R.mt Supplying and installing in position Full height library open book storage . Main frame : from 18mm thick MR grade Commercial ply wood with 1mm thick laminate external and Internally finish . Back- made of 9mm thick MR Garde Commcecial Plywood rade with 0.8mm thick internally. Sides: made of 18mm thick commercial ply Plywood finished with 1mm thick externally and 0.8mm thick internally. .All the exposed edges are to be with 1mm PVC edge banding and sealed edges , Shelf- 4 nos shelf inside fixed on shelf button made up of 18mm thick commercial plywood with with 0.8mm thick laminate finish with 0.8 mm thick PVC edge banding on exposed sides & sealed edges in 0.8mm thick PVC edge banding.Rates should be complete including all necessary hardwares, adhesives etc Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Three seater beam seating: (Benz 01 : Waiting Lounge Three Seater Tandem with Cushion ) Supply and fixing of Three seater beam seating as per approved make & sample by Architect/ Client. Tandom in 12mm thick moulded shell with veneer duly polished & cushion seat & back. Base in MS powder coating. fitting with Anchor Fasteners. with required accessories Handle,Cup Holder,Cusion,Lable, etc. Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Center Table: size of bigger table-2'6" Dia and smaller table-2' Dia Providing & Fixing of CENTER TABLE SET as per detail drawings. Top : 15mm thick solidwood and colour HDF with PU polish Base : Vertical support of Metal legs with powder coating Finish : Powdercoating on Metal frame Size of bigger table-2'6" Dia. Size of smaller table-2' Dia.Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Corner Table: Size-1'6" Dia, " ------------------Do------------------" as per above specification for complete work.

Library Table Four Seater With Low Partition Table : 1500 x 1200 x 750 mm Providing and fixing of Desking sysrem, with screen on the top with Metal passage side modesty. Table Top Size is 1500mmL x 1200mmW x 25mm With centre horizontal partition of 18 mm thk. x 150mm ht. vertical partitions devided in 2 section Frame in M.S Powder coating 25mm square pipe with perforated modesty, TABLE TOP:- Table top is made of 25mm E1 Grade laminated ply board with PVC edge banding with Grommet Legs made-up of MS,CRC and fixed with connector which makes weld-free design, straight 90degree. Extrusion are made in trapezoid shape which gives aesthetically appealing sleek look. BEAMS : :Leg to Leg Beam will be made of MS, CRC powder coated with Trapezoidal cross section Work complete as per drawing & direction complete with all standard fittings & fixtures, levelling screws etc. Proper fixing arrangement to floor/tiles for partition. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessories, SS brackets ,sample mockup etc as described in item description.work complete as per the instruction of Client/EIC.

Library Table With Low Partition Table : 1200 x 600 x 750 mm : "------Do----------" as per above specification for complete work.

Library Table With Low Partition Table : 900 x 600 x 750 mm : "------Do----------" as per above specification for complete work.

Staff room Table : 10 seater: 3600mmL x 1200mmW x 750mmHt : "------Do----------" as per above specification for complete work.

High Stool Table: Size - 1800x 450x750mm Table top : 50 mm thick postfoam top (reverse bull nose) with 1 mm thick VNR laminate finish as per approved make and sample by Architect/ Client. "------Do----------" as per above specification for complete work.

4'ft height storage: 450 mm Depth Storage unit top made up of 25 mm thk MDF Exterior grade The top has a post formation round edge finish with both side laminate .Storage body is made of 18mm thick MDF top with exterior grade finish with both side 1 mm thk laminate . Shutter finish with both side 1 mm th laminate. The back of the unit is made from 18mm thk ply with post laminate finish. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. Having premium lock with wave key technology and side and hinged shutters are sealed with 2mm thick PVC edge banding.SS 304 recessed handles are provided for easy opening and closing of shutter. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Enox/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany .Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. As approval of EIC. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC. Work complete as per the instruction of EIC. Equivalent to VNR series laminate.

Full Height Storage with Laminate Finish : 450 mm Depth Storage Comprising from IS 303 BWR 19 mm thick and 12 mm ply, finish with 1 mm thick Laminate finish as per approved make and shade by Architect. Solid Shutter : 25 mm thick comprising from IS 303 BWR ply & finish with 1 mm thick Laminate . Shelf: 19 mm thk IS 303 BWR ply finish with both side approved laminate. Inner area shall be finished with linear laminate. Ledge/Niche comprising from HDF / Lacquered glass finish w, required lighting arrangement. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives , grooves , consumable hardware & required SS 304 grade hardware/accessories , Profile handle, Wooden frame, monocoat polish, pvc edge banding of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Equivalent to VNR series laminate.

Library Book Shelf: 450 mm depth : Fulll height Supplying and installing in position Full height library open book storage . Main frame : from 18mm thick MR grade Commercial ply wood with 1mm thick laminate external and Internally finish . Back- made of 9mm thick MR Garde Commcecial Plywood rade with 0.8mm thick internally. Sides: made of 18mm thick commercial ply Plywood finished with 1mm thick externally and 0.8mm thick internally. .All the exposed edges are to be with 1mm PVC edge banding and sealed edges , Shelf- 4 nos shelf inside fixed on shelf button made up of 18mm thick commercial plywood with with 0.8mm thick laminate finish with 0.8 mm thick PVC edge banding on exposed sides & sealed edges in 0.8mm thick PVC edge banding.Rates should be complete including all necessary hardwares, adhesives etc Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Library Book Shelf: 450 mm depth : 1200 mm Ht Supplying and installing in position Half height library open book storage . "------Do----------" as per above specification for complete work.

Console : Providing & fixing Console complete as per drawing/Ref Image. Approx size : 1500 x 400 x 600 mm made from up of 19 mm thick BWR grade ply & finished of Laminate as per approved make and shade and solid wooden leg with matt finish monocoat polish as per drawing. Rate shall be inclusive of providing, fixing all necessary brass satin finish nickel plated/ S.S 304 grade (hardware from Hettich like Auto Hinges, handle, Rod locks, Multipurpose lock, Rate shall be inclusive of internal shelves of 19mm thick IS 303 BWR ply and laminate , PVC edge beading . All external & internal exposed woodwork to be finished in PU semi gloss paint finish polish as per specified item's manufacturer's specifications.Rate shall inclusive of providing mock up sample for approval of architect. Equivalent to VNR series laminate.

Student dining area : Dining table - 1800mm x 900mm x 750mm with folding bench TOP: SS 16 SWG UNDERFRAME: MS ANGLE 35 X 35 X 5MM THICK DULY PAINTED UPRIGHTS: 38 DIA X 16 SWG WITH ADJUSTABLE HEAVY DUTY NYLON BULLETS CROSS PIPE: 30 DIA 16 SWG BENCH TOP SS 18 SWG. BENCH SUPPORT PIPE 30 DIA X 16 SWG UNDERFRAME : MS ANGLE 35 X 35 X 5MM

Student dining area : Dining table - 2400mm x 900mm x 750mm withfolding bench " -------------------Do---------------------" as per above specification for complete work .

Dining table : 1800mm x 900mm x 750mm Providing & fixing table 25 mm thick top comprising from Pre-laminate / Post laminate finish with IS 303 BWR ply and vertical support comprising of MS section with powder coating ( Size @ 40 x 40 x 3 mm) . 2 side post form and other PVC edge finish. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Dining table -: 1200mm x 900mm x 750mm " -------------------Do---------------------" as per above specification for complete work .

Study Table with Overhead Unit storage : Table : 1050L x 600D x 750H , Overhead unit : 1050L x 400D x 750H Providing and fixing writting table of size 1050mm(L)x600mm(W)x750mm(H) , Table Top - of size 1050 mm x 600mm .Top made of out of 18 mm thick Commercial Plywood MR Grade finished with 1mm thick laminate on both sides with flat pvc lipping edge banding .Overhead storage of size 1050x400mm Made of 18mm thick Commercial plywood finished with 1mm thick laminated, edges to be finished with 0.8 mm thick pvc edge lipping. Understructure shall be made of 50.8 mm x 50.8mm x 1.25 mm thick powder coated ERW(ELECTRICAL RESISTANCE WELDING) tubes at base which are welded to the vertical channels shall be made of 0.6 mm thick powder coated MS ' C ' sections .Level adjustors are provided to take care of unevenness in floor . Drawer Cabinet size- 335mm Width mm x 550 Depth mm x 435 Height mm . MS Plus openable shutter which shall be 0.8 mm thick CRCA(Cold Rolled Close Annealed) MS . There shall also be Lock of 10 Lever Cam Lock and Handles built in Plastic 2dr = 1box+1file. All metal units shall be powder coated with thickness 40-60 micron. All material shall be of approved make. TABLE TOP : SIZE: 1050 (L) x 600 (W) x 18MM (H) , Material : 18MM Plywood , Laminate : 0.8 Aica Urben Teak OS White Balance , Edge : 22x1.5MM Urben Teak Rehau ,SOFT BOARD: SIZE: 1050 (L) x 800MM (H) - With Cloth + 9MM Ply Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Study Table : 900L x 600D x 750H " -------------------Do---------------------" as per above specification for complete work .

Bunk bed with side unit : 2000mm L x 1000mm W x 1600mm H Bunker 02 : Twin Over Bunk Bed duly Powder Coated metal frame in 38mm dia X 2 mm thk Pipe of 16g with safety side rail and ladder. • 1 rod Extra for mattress support. • Ply size : BUNKER BED PLY 1800W x 900D mm, 12mm Plywood there will be gap of 1.5” both side due to 6.5 ft. bed size. Storage : SHUTTER & CARCESS 20 GAUGE Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client

Cupboard : 900 X 550 X 2000 mm : Welded Construction : 0.8 mm thk (±0.08mm) CRCA* for Structure (20 guage) 1 mm thk (±1mm) High yield strength CRCA** for door (18 guage) CRCA D grade as per IS:513 : CRCA D grade high yeild strength as per IS : 513 Locking : Three way locking mechanism with shooting bolt Shelving :Height wise adjustable shelf mounting Uniformly Distributed Load Capacity per each full shelf is 40 Kg. maximum 4 nos. of adjustable full shelf Box file A4 size (85W x 345H x 285D) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. Leveler :M10 screw type leveler with hex plastic base Finish ; Epoxy powder coated to the tickness of 50 microns (±10). Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Cupboard :1000 X 550 X 2000 mm : " -------------------Do---------------------" as per above specification for complete work .

Full Height Cupborad with Mirror : 500 X 500 X 2000 mm " -------------------Do---------------------" as per above specification for complete work .

Computer Lab Study Table : Capacity-4 : 1800mm(L)X1200mm(W)X750mm(H) Table Top Size is 1800mmL x 1200mmW x 25mm With centre horizontal partition of 18 mm thk. x 150mm ht. TABLE TOP:- Table top is made of 25mm IS 303 BWR ply with PVC edge banding with Grommet provision. Metal BEAMS: Leg to Leg Beam will be made of MS powder coated with Straight of size 55 x 40 x 65mm. Horizontal beams below table top will be with 40mm x 30mm rectangular tube CRCA Powder coated. Modesty: vertical partitions devided in section Frame in M.S Powder coating 25mm square pipe with modesty. WIRE MANAGEMENT : MS-POWDER COATED wire tray with switch plate 150D/300D*120H below the table top and concealed leg with Grommet size 120 x120D on table top is considered. Keyboard: Providing and fixing key board as per approved make. Metal keyboard tray with Outer Dimension of the Keyboard tray is 507 x 245mm made of 1mm thick CRCA as per approved shade powder coating fixing with require all necessary acessories etc complete. CPU stand: Providing and fixing CPU trolly ebco or eqvilant approved make. CPU Trolley base is made of 1.6 mm thck CRCA and the sides are made of 1.2mm thick. The width of the trolley can be varied to accompany various width CPU. The CPU is mounted on lockable castors. Work complete as per drawing & direction complete with all standard fittings & fixtures, levelling screws etc. Proper fixing arrangement to floor/tiles for partition. Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client

Computer Lab Study Table : (Capacity-2) : 900mm(L)X1200mm(W)X750mm(H) : " -------------------Do---------------------" as per above specification for complete work .

Computer Lab Study Table : (Capacity-2) : 1800mm(L)X600mm(W)X750mm(H) : " -------------------Do---------------------" as per above specification for complete work .

Library Chair : Model equivalent make -DX 06 - Fix Chair Chair in 12mm hot pressed Veener moulded ply with Melamine finish in seat & back , Frame in M.S powder coating in oval pipe with Nylon bush below. Work complete including all necessary hardware and fittings , mock up sample, loading,unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Library chair : Model equivalent to Bravo NXT chair as per approved make list. Chair With Moulded ply 12 mm thick in seat & back , PU moulded foam on seat & back , 4 bend PU Arms / T Adujustable Arms , fix frame in 1" dia MS pipe of s Shape. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

SLOTTED ANGLE POWDER COATED RACKS: Length 900 mm x Depth 375 mm x 2100 mm H All levels are adjustable – user friendly structure. - Open Racks. - SIX Shelf level making FIVE Compartment - CRCA Shelf: Powder coated material with anti-rust treated for better finish. - Angle: Powder coated material with anti-rust treated for better finish. - Bottom rubber packing . - Zink coated Nuts & Bolts - Application for general product Storage The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives, hardware & accessories, all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent.

Library Open Rack : " -------------------Do---------------------" as per above specification for complete work .

Roller Blinds : Providing and fixing blinds as per approved make as per suggested shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 3% .Fabric value : 470 Gsm ,Thickness : 0.60 to 0.70 mm Construction: 75 % PVC & 25 % Polyster Fabric to be as per approved sample. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC. All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mockup sample approved by the Architect/ EIC.

Signages : Providing and fixing signages comprising form 45mm aluminum profile with back side UV printed PC as per instruction of Archiect/EIC. Contractor shall submit mock up sample.

Emergency Signages : Providing and fixing emergency signages of size 300mm x 100mm comprising form 1.5mm thick photoluminescent tap on 3mm thick acrylic sheet as per instruction of Archiect/EIC. Contractor shall submit mock up sample.

Planter box: Providing making, fixing as per detail drawing and required length and depth shall be made from 19mm IS 710 BWP ply with both side laminate finish and providing lighting arrangement cutout and fixing as per detail drawing and instruction. Rate shall inclusive all necessary hardware and fitting, ms framing, paint. The work shall be done as per the specifications, sample approved and as directed by the Architect/ Client. Rate shall inclusive of providing mockup sample for approval of Architect/ Client. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessorie, sample mockup etc as described in item description.work complete as per the instruction of Client/EIC.

Natural plants with poting mix as approved: fycus lyarata, travellars palme, elephant ear, pichardia grandis or similar plants. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Basic Rate of Material: Rs. 1500/Nos

2 Hours Fire rated door : Providing and fixing of approved make 120 mins Fire Rated doors tested and certified design as per IS3614 part-2 & BS476 part-20&22 at NABL Approved Laboratory & CBRI for its stability and integrity. Recommended fire door design should be similar to earlier test evidence from NABLORCBRI Approved Laboratory with or without vision lite for maximum fire rating of 2hrs. Doors will be finished in Powder Coating with film thickness of 60 mincrons approx. in desired RAL Shades. The manufacturer company is a member of NFPA and ISO9001-2015cerified. Door frame shall be Double rebate profile of minimum size 125mm X 57 mm made out of 1.5mm minimum thick galvanized steel sheet. 100x57 Frames will be mitered jointed and field assembled with miterd joint. The frames will be finished with Powder Coating in desired RAL Shade Door leaf shall be minimum 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.83 mm minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honey Comb craft paper. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement . work complete including all type of hardware, fittings, fixtures, as per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client.

Corner Guard : Providing and fixing of SS 304.Silver Matte Finish. 50 x 50mm corner guard as per approved sample by Architect.This will be stuck with adhesive and just 4 screws...2 on the bottom and 2 on top. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

PICASSO CORAL LED: 30W, High efficient coral (bell) shape made of aluminium white colour coated outside finish. LED's provided with high efficient non yellowing PMMA diffuser provides soft light.CRI>80, IP20, Ambient temp-0 to 45 Deg C, CCT - 4000K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<15%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 3000 lm. (100lm/W)

HALO PLUS LED DOWNLIGHT: 18W, High efficiency surface/suspended downlighter designed with microtexture CRCA powder coated housing. High efficient transmissivity diffuser provides soft light. CRI>80, IP20, Ambient temp- 0 to 45 DegC, Driver efficiency>86%, THD<10%,Powerfactor>0.95, CCT - 4000/5700K, 50,000 hrs @ L70 life. Surge protection-2.5 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1800 lm. (100 lm/W)

"Supply Installation Testing Commisioning of Recess/Surface mounted/suspended 3 wire Track System . Should be available in Black/white body color it will be decided by architect. Should be using 3 wire system. Should be able to connect using interconnectors. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . Approved Make.: ERCO/LIGHTING TECHNOLOGIES/PHILIPS/FORMA LIGHTING"

Rate Only Item

Wooden ceiling finish with Laminate : Providing and fixing IS 710 12 mm thick Marine plywood false ceiling as per drawing , instruction , sample approved & complete with Aluminium anodised section size 50x50x1.5 mm & 25x50x1.5 mm frame work. the frame work fixed as per drawing @ 600 mm c/c. finish with 1 mm thick VNR series Laminate. Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs . (or a sample mock of 5 Sqm minimum of the frame work and ceiling) shall be approved from Architect. 5mm Groove shall be provided at the junction of the false ceiling & the wall. ( considering all levels with require all Framing work and fitiing from RCC slab to false ceiling level) Equivalent to VNR Series Laminate.

HDF board: " ------Do -----------" as per above item specification (Laminate paneling item) for complete work . using 8 mm thick HDF for panelling work with PU spray polish as per approved by Architect/Client.

Two seater Sofa : Size - 1350 (L) x 800 mm (B) x 750 mm (H).: " ---------Do---------" as per above specification for complete work. Basic Rate of Fabric : 800 Rmt

Centre table - 1050mm x 600mm x 450mm: "---------Do-------" as per above specification for complete work.

Centre table - 900mm x 750mm x 450mm: "---------Do-------" as per above specification for complete work.

Corner Table : 600mm x 600mm x 450mm: "---------Do-------" as per above specification for complete work.

Corner Table :450mmx 450mmx 450 mm: "---------Do-------" as per above specification for complete work.

Teacher's table / Inquiry Desk : 1200 x 600 x 750 mm Equivalent to code no : Silence 03 Table Top : 25mm thick BWR ply with VNR laminte finish with matching PVC edge banding and aluminum flip up with anodized finish. Under structure : 25mm thick pre laminated Gable Ends with Ms Powder coaetd Beams. Modesty : 303 BWR ply with VNR laminate Wire management : Powder coated wire tray with switch plate & PVC wire guard for wire management Two Drawer Unit : Comprising from 303 BWR ply with VNR laminate with matching PVC edge banding , handle & lock & key. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. PVC edge banding are imported from Rehau or Dolken of Germany. Work complete including all necessary hardware and fittings , mock up sample, loading,unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

TV unit: Providing and fixing TV ledge unit comprising from MR grade ply with 1 mm thick VNR laminate finish as per approved sample. TV unit consisting 2nos. of Drawer & 1nos. niche. Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Student dining area : SITC of dinning table as per approved shop drawing by Architect. Dining table - 1200mm x 900mm x 750mm with folding bench TOP: SS 16 SWG UNDERFRAME: MS ANGLE 35 X 35 X 5MM THICK DULY PAINTED UPRIGHTS: 38 DIA X 16 SWG WITH ADJUSTABLE HEAVY DUTY NYLON BULLETS CROSS PIPE: 30 DIA 16 SWG BENCH TOP SS 18 SWG. BENCH SUPPORT PIPE 30 DIA X 16 SWG UNDERFRAME : MS ANGLE 35 X 35 X 5MM

Island Bench IB-01 Size:- 5275 MM L X 1500 MM D X 800 MM H SITC of lab furniture as per approved shop drawing by Architect. C-frame structure is constructed with 30 x 60 mm hollow square mild steel tubes, 2 mm thick : 5.275 Rmt. Jet Black Granite Worktop with a thickness of 17-20 mm: 7.9125 Sqmtr. 750MM Wide Suspended Module With One Drawer Two Shutter: 4 Nos Worktop-mounted electrical raceway is in triangular construction : 10.55 Rmt. 6/16 Amp electrical sockets and a 16 Amp one-way switch with internal wiring : 8 Nos. Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client

Wall Bench WB-03 Size:- 8249 MM L X 750 MM D X 900 MM H SITC of lab furniture as per approved shop drawing by Architect. C-frame structure is constructed with 30 x 60 mm hollow square mild steel tubes, 2 mm thick : 8.249 Rmt. Jet Black Granite Worktop with a thickness of 17-20 mm.: 6.18675 Sqmtr. 750MM Wide Suspended Module With One Drawer Two Shutter 2 Nos 750MM Wide Suspended Sink Module With Two Shutter : 3 Nos Worktop-mounted electrical raceway is in triangular construction : 8.249 Rmt. 6/16 Amp electrical sockets and a 16 Amp one-way switch with internal wiring : 8 Nos. PP Sink: L 560mm x W 355mm x H 245mm : 3 Nos. One Way Swan Neck Water Faucet RWD china make : 3 Nos. Single Side Reagent Rack : 8.249 Rmt 6/16 Amp electrical sockets and a 16 Amp one-way switch with internal wiring. Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.

Island Bench IB-03 Size:- 6025 MM L X 1500 MM D X 900 MM H SITC of lab furniture as per approved shop drawing by Architect. C-frame structure is constructed with 30 x 60 mm hollow square mild steel tubes, 2 mm thick. : 6.025 Rmt. Jet Black Granite Worktop with a thickness of 17-20 mm. : 9.0375 Sqmtr. 750MM Wide Suspended Module With One Drawer Two Shutter : 4 Nos 750MM Wide Suspended Sink Module With Two Shutter : 4 Nos Worktop-mounted electrical raceway is in triangular construction : 12.05 Rmt. 6/16 Amp electrical sockets and a 16 Amp one-way switch with internal wiring. : 8 Nos. PP Sink: L 560mm x W 355mm x H 245mm : 4 Nos. One Way Swan Neck Water Faucet RWD china make : 4 Nos. Double Side Reagent Rack : 6.025 Rmt Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client

Island Bench IB-11 Size:- 7520 MM L X 1200 MM D X 800 MM H SITC of lab furniture as per approved shop drawing by Architect. C-frame structure is constructed with 30 x 60 mm hollow square mild steel tubes, 2 mm thick. : 7.52 Rmt. Jet Black Granite Worktop with a thickness of 17-20 mm. 9.024 Sqmtr. Worktop-mounted electrical raceway is in triangular construction : 15.04Rmt. 6/16 Amp electrical sockets and a 16 Amp one-way switch with internal wiring: 10 Nos. Work complete including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client

Signages Type 1 : 3D letters with LED : Wall Mounted Material : 3 mm thick exterior grade premium quality ACP sheet (0 .25 mm foil thickness) & and 3D Embossed virgin acrylic/aluminum letters as per approved make and sample by Architect/ Client. Led Light : Rishang(Korea) and SMPS as per approved make and sample by Architect/ Client. The rate shall be for complete item of Designing, providing, fixing & erection, inclusive of all material, labor, wastages, necessary tools & tackles, adhesives, required hardware/accessories, any type of framing work, engraving, required civil work with finishing, LED light . Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications & instruction of Client/EIC.

Profile Mirror with LED Light: Providing and fixing Profile mirror with LED Light as required shape, as per approved make & sample. Size : 800mmx1500mm Glass: 5 mm thick mirror Frame : Aluminum frame of size 40mm x 9mm, Brush gold finish Rate shall inclusive all type of material, fittings, fixtures, LED light, if required ply frame/paking, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications & instruction of Client/EIC. sample mock shall be approved from Architect/Client.

Alluminium Skirting : Providing and Fixing ofAluminium Skirting as per approved make having width of 75 MM X thickness of 2mm made out of 6063 Grade Aluminium alloy duly anodised as desired in the Ral Colour code decided by the architect having neat screw fixed arrangement with Rubber seal over it as per Manufacturers Specification. work complete as per the instruction of Architect. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description.

Writable with magnetic glass board : Providing & fixing 04mm SGG Pristine Tan Glossy Finish writable & Magnetic CEP board on existing partition/wall as per approved sample by Architect/Client. work Including cost of all type of fittings , accessories , tools, tackles, all labour, scaffolding, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift etc. etc.work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.Only the clear elevation area shall be measured and paid.

Metal Profile : Providing and fixing of 6 mm thick S.S. T Profile Copper or as per approved sample by Architect including necessary material , adhesive tools , tackles , fittings etc complete .Work complete including all type of tools, tackles, scaffolding ,mock sample, etc complete as per instruction of Architect/EIC.

NEW CONCEPT (BID ID -3214611)

TRIPUR BUILDERS (BID ID -3216555)