Kerala

Technical Eval

Works

Civil Works - Others

Supply and Fixing of Aluminum partition above sill level at west side of first floor of ARP DCS building.

Kerala Minerals and Metals Ltd

KMML CHAVARA | Kollam, Kerala

Amount: ₹3.4 LCloses: 18 Aug 2026Closed

Timeline

Published7 Aug 2026
Closed18 Aug 2026
Technical Evaluation5 Sept 2026
Award—

Bids

2 Bids5 Sept 2026

#	Company	Status
1	KOLLAM FABRICATORS AND ERECTORS Accepted-Technical	Accepted-Technical technically acceptable
2	PRASAD PILLAI Accepted-Technical	Accepted-Technical technically acceptable

Tender Value

₹3.4 L

EMD Value

₹8,390

Closing Date

18 Aug 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Address

KMML CHAVARA

Work Description

Supply and Fixing of Aluminum partition above sill level at west side of first floor of ARP DCS building as per BOQ and tender doc.

Tender Information

Tender ID

2026_KMML_864235_1

Reference Number

KMML/TP/PROJ/C/T/01/2026-27 dated 28.07.2026

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

30 days

Location

KMML CHAVARA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredCopy of remittance towards BID submission fee and BID Security (.pdf)

RequiredSelf-attested copy of valid registration certificate for contractor (.pdf)

RequiredDuly filled and signed copy of Form of tender as per item no 1 of Section VI of this bid document (.pdf)

RequiredDuly filled and signed copy Preliminary agreement as per item no.02 of Section VI of this bid doc (.pdf)

RequiredDuly filled and signed copy of Integrity Pact Certificate as per item no.03 of section VI of bid (.pdf)

RequiredDuly filled and signed copy of affidavit as per item no.04 of section VI of this bid doc (.pdf)

RequiredDuly filled copy of requisition for E- Payment form as per item no.06 of Section VI of this bid d (.pdf)

RequiredSelf-attested copy of Bidders Valid GST registration certificate issued by Govt. of India (.pdf)

RequiredBidder shall upload a complete set of bid document duly signed (.pdf)

Finance

RequiredPRICE BID BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹792

EMD Fee Amount

₹8,390

Important Dates

Last Activity

5 Sept 2026

Published

7 Aug 2026

Bid Opening

19 Aug 2026

Download Starts

7 Aug 2026

Download Ends

18 Aug 2026

Submission Starts

8 Aug 2026

Clarification Period

8 Aug 2026 - 18 Aug 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1.001	21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	1	Kg	-	-
1.002	9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.	-	Nos	-	-
1.003	OD101444/2026-2027 Providing and fixing 8 mm thick Wood Plastic Composite (WPC) cladding panels of approved make and colour, comprising high quality WPC boards , fixed over a suitable Aluminium/ GI supporting framework with necessary brackets , cleats , stainless steel screws, clips , anchors and fasteners. The work shall include cutting , drilling, edge finishing , joint treatment, corner and edge trims, alignment , levelling ans sealing of joints wherever required, and all accessories necessary to complete the work in accordance with the approved drawings and the Engineer in charge.	-	1 Sqm	-	-
1.004	21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	-	Sqm	-	-
1.005	21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	-	Kg	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

TENDERDOC.pdf

Tender Documents • 1.47 MB

TENDERDRAWING.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KOLLAM FABRICATORS AND ERECTORS

Accepted-Technical

PRASAD PILLAI

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1.001

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

1.002

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Nos

1.003

OD101444/2026-2027 Providing and fixing 8 mm thick Wood Plastic Composite (WPC) cladding panels of approved make and colour, comprising high quality WPC boards , fixed over a suitable Aluminium/ GI supporting framework with necessary brackets , cleats , stainless steel screws, clips , anchors and fasteners. The work shall include cutting , drilling, edge finishing , joint treatment, corner and edge trims, alignment , levelling ans sealing of joints wherever required, and all accessories necessary to complete the work in accordance with the approved drawings and the Engineer in charge.

1 Sqm

1.004

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Sqm

1.005

21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)