Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.0 L+₹78,821 (4.33%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹20.2 L+₹2.0 L (10.9%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹20.6 L+₹2.4 L (13.4%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) NO 02 JODHPUR
GE (AF) NO 02 JODHPUR
REPAIRS TO JOINERY IN CERTAIN BLDGS UNDER AGE B/R-I, GE (AF) NO 02 JODHPUR
2023_MES_583267_1
8359/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) NO 02 JODHPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) NO 02 JODHPUR
₹40,000
Yes
20 Apr 2023
27 Feb 2023
3 Apr 2023
27 Feb 2023
1 Apr 2023
20 Mar 2023
6 Mar 2023 - 13 Mar 2023
Amount
Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site.
Taking down Shutters of any description exc 2 sqm each and removing from site.
Taking down chowkats or frames exe 1.5 Sqm but n. exc 4 sqm each with shutter (without taking off shutters from the frame) and removing from site complete all as specified & directed.
Taking down chowkhat or frame n exc 1.50 sqm each (without taking of shutters from the frame) and removing from site complete all as specified & directed.
S&F for 2nd class hard wood plain, solid, straight, chowkats and frame wrought framed, put together, with glue, pinned at joints, all as specified and directed.
Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.
M&L for framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete all as specified & directed.
S&F in repairs steel windows with side hangs shutters including projecting type hinges with steel handles, steel peg stay complete with glazing bar, dovetailed or welded. Note: Quoted rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.
S&F steel windows with side hangs shutters including projecting type hinges with steel handles, steel peg stay complete without glazing bar, dovetailed or welded. Note: Quoted rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.
S&F frame work such as guard bars ,grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 grade E-165 complete all as specified & directed.
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of red oxide complete all as specified and directed.
S&F Plain framed, panelled shutter of 2nd class hard wood (two panel) of 35mm thick factory made shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed.
S&F Flush shutters,40 mm thick particle board core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.
M&L for factory made, Glazed and skeleton shutters for door/window, of thickness 35mm of 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.20 (a); supplied and fitted to chowkats complete all as specified & directed. Note: Glazed or cloth etc in panels or sash square shall be measured separately
S&F Galvanised MS wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel type C21of size 100 mm.
S&F floor door stoppers of alluminiun alloy body and tong, anodised with hard drawn steel spring with overall length of cover plate is 140 mm.
S&F Aluminium anodised barrel tower bolt of extruded section 150mm size.
S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.
S&F extracted aluminium alloy handles, fabricated type, anodised of size 150mm.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of pink primer complete all as specified and directed.
Resecuring or easing and adjusting without taking down shutters of any description (door/window) exe 1 sq.m but n exe 2.0 sqm each.
Resecuring or easing and adjusting without taking down shutters of any description (door/window) exe 2.0 sqm each.
Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n. exc 6 mm.
S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane incl glazing clips.
S&F in repairs Galvanised MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples.
S&F in repair door closer hydraulically regulated, aluminium extruded section body designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35kg and fixed.
S&F in repair floor door stoppers of alluminiun alloy body and tong, anodised with hard drawn steel spring with overall length of cover plate is 140 mm.
S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150mm of size.
S&F in repairs Butt hinges, extruded aluminium alloy with galvanised mild steel type C21of size 100 mm including welding, painting etc if required.
S&F in repairs Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.
S&F in repairs extracted aluminium alloy handles, fabricated type, anodised of size 150mm.
S&F in repairs extracted aluminium alloy handles, fabricated type, anodised of size 100mm.
S&F in repairs 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.
M&L in repairs for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete.
S&F in repairs Pre-laminated particle board, interior grade 18/19 mm thick, pre-laminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as built-up furniture as specified and as directed.
S&F Plain fillets 2nd class hard wood of sectional area not exe 3 sq cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads.
S&F butt hinges ,40 mm of size cast brass with mild steel hinge pin, bright polished type B-11.
S&F 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished.
Taking down cement plaster on stone masonry walls including racking out joints hacking for key scrubbing down with water etc.
M&L for rendering 15mm thick in CM 1:4 on stone masonry surface including finish even and smooth surfaces without using extra cement.
M&L for preparing new plastered surfaces and applying two coat Oil bound distemper on walls.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.
M&L for non-skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.
M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
S&F 9 mm thick plywood in repair, grade BWR, type BB, fixed with screws/nails to any type of frame work/surface with wooden fillets/frame wherever necessary in any position complete all as specified and directed.
S&F in repairs steel handles including painting, welding, bolting in steel windows/ ventilators etc as directed.
S&F in repairs steel hinges including painting, welding, bolting in steel windows / ventilators as directed.
S&F in repairs peg stays including painting, welding, bolting in steel windows/ ventilators as directed.
S&F in repair drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engineer-in-charge.
S&F in repair decorative finals ABS plastic fancy type bracket, fancy type hook in matching colour of steel powder quoted paint of same colour of rod incl all as directed Engineer-in-charge.
S&F in repairs solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors complete all as specified and directed.
Fixing/tightening/hanging of kitchen rack, pelmet box, curtain rod with fancy type hook/brackets/holders in matching colour, cloth hanging wires, dressing tables/mirrors, towel rails/ring, and like on wall with screw/nails including all necessary fixing arrangements, complete all as specified and directed. Note: Quoted rate for each article.
Making opening for desert cooler in existing window any type as per directed by Engr-in-charge, including dismantling and re-fixing after necessary cutting, welding, painting, of steel/wooden window with or without frame including grill in any position, and finishing disturbed surface with stone/brick/concrete block masonry and plastering work if required complete all as specified and directed.
Easing of steel/wooden window, ventilator any type, in any position including welding, re-oiling if required and chiselling, scrapping down, removing of stone/concrete/brick work or plastering work to easily movement of shutter and making smooth surface of wall/ceiling/chajja etc with necessary plastering and colouring, complete all as specified and directed.
S&F in repair anodised aluminium frame section powder coated for door/window/partition with one or more rebates including joining cleat for fixing and including all necessary fitting and fixes complete all as specified.
S&F in repair anodised aluminium door shutters/window shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F Sheet glass thickness 5.5 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane including all necessary fitting and fixture complete.
S&F in repair plane 12 mm thick PVC sheet/board of required size as partition fixed with aluminium frame including all necessary fitting for fixing complete all as specified and directed.
M&L for cutting shrubs, wild growth / trees and removal of plant growth by grubbing out shrubs / plants / trees or any vegetation growth n.exe 10cm girth including cutting of trunk portion protruding outside the walls / roof, digging out roots and application of chemical Glyphosate solution (4% concentration) as per manufacturer’s instructions by injecting in stem of plants and roots as directed and removing complete vegetation growth from walls including taking out roots from roof / stone / block masonry work and making good the disturbed surface with PCC 1:2:4 type B0 and necessary cement base paint and disposing off the rubbish from the site outside MoD land, for upto four story buildings (incl scaffolding) complete all as specified and directed.
Same as item No.67.00 above but exe 10cm but n.exe 20cm girth.
M&L for repairs to leakage in floors of WC/Bath Room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap/nahani trap, suitable for type ‘B’ pipes, 75 mm dia of outlet, plain with grating, including jointing with solvent cement and making good floor to match with existing floor complete all as specified and directed.
M&L for repair to leakage in roofs, terraces by breaking of existing floor/finishes and providing new PVC (SWR) bend/junction suitable for 'B' pipes,110 mm dia of outlet plain with grating including jointing with solvent cement and making good floor to match with existing floor complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.
M&L for taking down and repair to aluminium door exc.1.5 Sqm but n.exc.5 sqm each by providing joint cleat, glazing clips, rubber neoprene packing, handle 02 nos in each door, hinges anodised aluminium snap beading screw etc and re-fixing the same after repair Note:-Glass, or PVC partition, if any shall be measured and paid separately.
M&L for taking down and repair to aluminium door not exc.1.5 Sqm each by providing joint cleat, glazing clips, rubber neoprene packing, handle 02 nos in each door, hinges anodised aluminium snap beading screw etc and re-fixing the same after repair Note:-Glass, or PVC partition, if any shall be measured and paid separately.
S&F in repairs PVC board, interior grade 18/19 mm thick , pre-laminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or PVC sheet or other place as built up furniture or shelf as specified and as directed.
POOJA CONSTRUCTION
Lalit Enterprises
AAI NATH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .