SPL REPAIR TO BLDG NO P27 (OR LIVING) OF 25 INF DIV CAMP AND BLDG NO T7 T71 T82 T87 T91 AND T95 AT 25 INF DOU UNDER STN HQ RAJOURI AT GE 862 EWS

Amount

Sch 'A' Part-I (B/R works). Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) as in sub base for tiling, complete all as specified and directed.

M&L for glazed ceramic coloured tiles with high lighter tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 of any size, complete all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including rendering of 15 mm thick in cement mortar 1:4, complete all as specified and directed.

M&L for 18-20mm thick marble (table rubbed and polished) of any colour in flooring, cooking platforms, in steps, pillars, window cills, etc, laid over & including 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of marble slab, rounding edges etc, complete all as specified and directed.

Material and labour for 16-18 mm thick black or any other colour granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar, complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 11.00 here-in-before but excep bricks. Note: Brick retrieved from Item No 10.00 shall be re-used.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement and chiken wire mesh shall be used as per the site requirement and directed by the Engr-in-Charge to prevent cracks, complete all as specified and directed. Note: Cost of chiken mesh is included in the quoted rate.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surface in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6 ) on external brick work or concrete surfaces , finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions complete all as specified and as directed. Chiken wire mesh shall be used as per site requirement and as directed (Cost of WPC and chicken wire mesh shall be included in the qoted rate). Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site.

M & L for rendering 10mm thick in cement mortar (1:3) on soffits of slabs, chajja etc finished even and fair without using extra cement, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including necessary form work, complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered wall surface including cornices etc and applying two coats of Premium acrylic Alkali & fungal & dirt resistance exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivelent make of any approved single/two or more colour pattern as specifed by Engr-in-Charge over and including a coat of primer all as directed and as approved. Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site.

M & L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed.

M & L for applying one coat of distemper oil emulsion on old wall surfaces including preparation of surfaces, complete all as specified and directed.

All as per item No 22.00 here-in-before but on ceiling, complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof surface including cornices and chajjas etc and applying two coats of exterior emulsion weather coat paint of Apex Ultima of ASIAN or equivelent make of any approved single/two or more colour pattern as specifed by Engr-in-Charge over and including a coat of primer all as directed and as approved. Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site).

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 but not exceeding 4.0 sqm each, complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 but not exceeding 2.0 sqm each, complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates and holdfast with PCC etc complete all as specified and directed.

S & F for 35mm thick 2nd class Hard Wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications), complete all as specified and directed.

M & L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications, complete all as specified and directed.

M & L for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

M & L figured glass, pin head type, 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane, complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board, interior grade both side decorative choice lamination fixed to aluminium doors or similar works, complete all as specfied and as directed.

S&F for powder coating of any colour (thickness of powder coating not less than 50 micron) three track slinding window with window frame (chowkat) of 101.6mmx44.45mmx1.5mm and shutter styles of 40mm x20 mm, with two shutters of 5 mm thick plane /coloured/frosted sheet glass, one shutter of stainless steel mosquito proofing with good quality bearing,with aluminium beads locking arrangement with each shutter complete frame and rubber beading and glazing clips and all other accessories as per site requirement and as given in 'JINDAL' catlogue complete as specified and directed. Note :- The quoted rate deemed to be included for all builders hardware /accessories, glass and SS mosquito proofing.

S&F in repair Aluminium anodized grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directions.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 including dismantling old one complete all as specified and directed.

S & F Stainless steel wire cloth., 0.71 mm nominal dia ofsize of mesh 12 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and directions.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled, complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified and directed.

S & F 300mm, mild steel rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S & F for brass mortice lock vertical type 100 mm long with 4 levers, complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description having width/girth exceeding 10 cm and apply one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description having exceeding 10 cm width/girth and apply one coat of synthetic enamel pain, complete all as specified and directed.

S & F for rotational moulded poly-ethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing 500ltr capacity tank, complete all as specified and directed.

S & F for rotational moulded poly-ethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing 1000ltr capacity tank, complete all as specified and directed.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

S & F in repairs stainless steel curtain rod of 20mm dia with suitable knobs, complete as specified and directed.

S & F stainless steel 'T' and 'L' type brackets with finials complete as specified and directed.

Demolition of RCC of any description and in any position not therwise specifically provided for, complete all as specified and directed.

M&L for reinforced Cement Concrete nominal mix type B1 1:2:4 (20mm graded stone aggregate) in Beams, cantilevers, lintels over 1.5 M span, chajjas, parapets & slab etc, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing, complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves, parapets & slab including supports etc, complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

S & F in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenchesor in floors 110 mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) bends of any radius of 110mm dia complete all as specified and directed.

S & F in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenchesor in floors 75 mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and directed.

M & L in repairs 75/100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F for 75mm PVC(SWR) vent cowl complete all as specified and directed.

M & L for steel water tubing, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15 mm dia including taking down old steel tubing, complete all as specified and directed.

M & L for steel water tubing, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 20 mm dia including taking down old steel tubing, complete all as specified and directed.

M & L in repair for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 15 mm dia complete all as specified and directed.

M & L in repair for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and directed.

M & L in repairs for 15 mm bore Chromium plated fancy type Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

M & L in repairs for 15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfl y handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated brackek complete all as specified and directed.

S & F in repair 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed.

S & F in repair PVC connection pipe 15mm dia with PTMT nuts of length of 600mm, complete all as specified and directed.

S &F in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed, complete all as specified and directed.

S &F in repairs for 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed, complete all as specified and directed.

Supplying and fixing in repair white vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply and fix in repairs vitreous china squatting pan, orissa pattern size 680 x 470 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete, complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve foat and handle including brackets 10 litres, complete all as specified and directed.

S&F in repair copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and including cover plate, complete all as specified and directed.

Supply and fixing in repair viterous China wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified and directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repiar soap dish of size 100 x 100 x 60mm fixed with and incl chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

S & F in repair 15mm bore brass CP wall mixer 3 in 1 with arrangement to overhead shower with connection legs wall flanges and wall bracket, complete all as specified and directed.

S&F in repair for CP brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. complete as all as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail all as specified and directed.

S & F in repair sheet front glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with CP bracket guard and raising railing 60cm long, complete as specified and directed.

S & F in repair brass CP Health faucet with 1.2 meter long stainless steel hose and wall hook as in repairs all as specified and directed.

S&F in repair 15 mm dia two way tap cast copper alloy, chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair for CP soap dish holder with chromium plated brass screws, complete all as specified and directed.

S&F in repair PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting, complete all as specified and as directed.

Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe, complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in surface channels and drains, complete all as specified and directed.

M & L for forming fair finshed drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends, complete all as specified and as directed.

De-sludging of manholes, septic tank & filterbeds of any description, any capacity and in any position by pumping out and removing to a distance exc 250m by mechanical mean (trolly mounted) and burring in pits, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in manhole cover mortar 1:6 all as specified and directed, complete all as specified and directed.

M&L for water proofing treatment to sunken portion (floor and wall) of WCs, bathroom etc by :- (a) Complete removal of existing filling and treatment over RCC slab and making a slope of 1:8 in and including PCC (1:2:4) type B-0 with minimum thickness 30mm using 12.5mm graded stone aggregate and providing all wall and floor joints with coved fillet in PCC (1:2:4) type B-0, having a radius of 70mm. (b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (d) Sealing of joint of Trap/WC/Soil pipes with sealing compound of MC Bouchemie/Roofex/Forre/Choksy/Dr Beck & Coty/FOSROC

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft/loose soil for shafts, wells, manholes etc n exc 10Sqm on plan for sewage line & foundation etc, complete all as specified and directed.

Demoltion and breaking up existing sewage (SGSW / AC pipes and the like , 150mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m, complete all as specified and directed.

M&L for NP2 drain pipes 150mm bore laid in trenches and jointed, complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150mm bore pipe, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated materials n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting point, complete all as specified and directed.

M & L for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tile complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 with water proofing compound @ 3% by weight of cement , on brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement , including wiremesh wherever required and rendering height up to four (04) storey building complete all as specified and as directed. (Note: The rate to be incuded integral water proofing compound).

M & L for Rendering 10mm thick on fair faces of brick/stone work or concrete surface in CM (1:6)as in wall, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed.

S&F pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates complete all as specified and directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per Item No 115.00 here-in-before, but without galzing bars, complete all as specified and directed.

S & F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed.

S & F for aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/ coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, alum tower bolt including mortice lock, aluminium hydraulically door closer and brass door stopper, complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).

S & F for aluminium powder coated of any colour window and ventilator with one or more shutters fixed / side hung type without sash bar , aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21 100mm long , suitable handle, alum tower bolt complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).

S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks/WHB complete all as specified and directed.

Supply and fixing in repairs viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements complete all as specified and as directed.

S & F in repairs concealed type Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F in repairs Vitreous China Wash hand basin white, flat back, size 630x450mm size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S & F in repair bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed.

S & F in repair brass CP Towel Ring 20mm complete as specified and directed.

S & F in repair brass CP peg set of 6 hooks complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and as directed.

All as per Item No 129.00 here-in-before but except Stone. Note : Stone retrieved from Item No 10.00 shall be re-used.

S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall / ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification after dismantling of old unserviceble PVC lining of any type complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

Material & Labour for joist,channel,angle, MS tublar pipes or tee sections, fixed independently with or without connecting plates, cut to ordinary lengths i.e within 20mm of the lengh given complete all as specified and directed.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc and making good the disturbed surface, complete all as specified and directed.

S&F in 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n . Exc 0.50 sqm in each pane complete all as specified and as directed

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agreegate) as in foundation filling and mass concrete, complete all as specified and as directed

Sch 'A' Part-II (E/M works) Taking down U/S copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed, complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm PVC insulated, FRLS type, unsheated, multistranded, flexible, copper conductor cable 1.5sqmm, 1100 volts grade drawn through and including in PVC conduit of suitable sixe as required at site with all accessories such as Tee, corner, overlaping connector etc on surface walls, roofs and ceilings etc including concealed MS box factory made of suitable size for modular switch socket including modular cover plate and frame suitable for fixing and fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regularors etc and including 1.5 Sqmm PVC insulated multistranded, unsheathed (Green Colour) FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for one light point/ fan point controlled by one swtich.

One light point/ fan point/ bell point controlled by one switch, complete all as specified and directed.

One socket out let 5 Amp point controlled by one switch one way on same switch board, complete all as specified and directed.

One socket out let 5 Amps point controlled by one switch one way on independent board, complete all as specified and directed.

M&L for point wiring complete with 2.5sqmm single core PVC insulated, unsheathed, 1100V grade copper multistranded, conductor cable (FRLS) drawn throguh in and including concealed PVC conduit heavy duty (minimum 25mm in width), with its fittings such as Tee, corners, overlapping connectors etc fixed over walls, ceiling, floors etc, also including PVC insulated unsheathed, multi stranded copper earth continuity conductor 2.5sqmm cable (FRLS) (green) connected to common earth dolly and also providing modular metal flush boxes with modular white cover plate plate and frame of module as directed by the GE suitable for fixing of modular switches, sockets etc for one 6 pin, 16/6 Amps socket outlet on independent board controlled by one 16 Amps switch, complete all as specified and directed.

S&F modular type switch single pole way 6A, 1 module, complete all as specified and directed.

S & F modular type socket outlet 2/3 pin, 2 module, 6A, ISI marked, 230 volts, complete all as specified and directed.

S & F modular type switch, 1 module, single pole one way 16Amp, complete all as specified and directed.

S & F modular socket outlet 6/16A, 6 pin, 2 module, ISI marked, 230 Volts, complete all as specified and directed.

M&L for point wiring with with 4sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 4sqmm PVC insulated unsheathed multistanded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC conduit along with modular sunken boxes of required size with modular white cover plate with frame including cutting chases to wall making good the disturbed surface to match with the existing specification, complete all as specified and directed.

S&F in repair modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

S & F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm, complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling caities with filler, one coat after cleaning all dust including refixing the same, complete all as specified and directed.

S & F lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent holder fittings , complete all as specified and directed.

S&F LED lamp 9W inverter bulb, B22 CDL, suitable for lamp holder, complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

M&L for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as sepecified and directed.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable, complete all as specified and directed.

Supply and fixing AC Socket with 20 Amp MCB with Sheet metal Enclosure with IP -66 and shock proof complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with 2x6.0 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 6.0 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth lead and including PVC conduit along with including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for sheet metal enclosure MCB distribution board, double door TPN with IP-66 protection single phase 415 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

M&L for MCB TPN 415 volts any rating upto 100 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed.

M&L for MCB single pole and neutral 240 volts any rating upto 6 to 40 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

M&L for MCB single pole 240 volts any rating upto 6 to 32 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed.

Supply and lay GI pipe 40mm bore light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed.

Supply and filling and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.

M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick complete all as specified and as directed.

Supply and lay GI pipe 50mm bore light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item complete all as specified and directed.

M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete.

M/S BADRI NATH GUPTA (BID ID -3460880)

NATIONAL TRADING COMPANY (BID ID -3464119)

M/s Anil Engineers & Builders (BID ID -3466381)

M/S IMRAN MAJID (BID ID -3466909)