Tender for work of Erection & Maintenance work of HT/LT line & TC and HT XLPE UG CABLE Work on ARC Basis for work under various scheme under Kadoadar-2 S/dn under KADODARA Division ( Parab SS Area).

CAPITAL WORK LABOUR RATES FOR FY 2025-26 (WITHOUT GST)

Sr. No. Item Code Item Unit Rate for FY

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS

AND NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI- CLIMBING DEVICES, DANGER BOARD,

3 9926000003 INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE No.

POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS ETC.

COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE INCLUDING EXCAVATION

OF PITS & REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING

6 9926000006 DEVICES DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF POLES,FABRICATED No.

MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI- CLIMBING DEVICES, DANGER BOARDS, INSULATORS,DOFUSES

ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI- CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES TRANSFORMERS,

LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXINGOF

10 9926000010 CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER No.

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER STANDARD

11 9926000011 SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY No.

INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4) AND WATER CMT

12 ETC. AS PER STANDARD SPECIFICATION.(cement Should be

grade) used for Concreting.

9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT WITHOUT COST OF GI No.

WIRE AS PER STANDARD SPECIFICATION(20kg solt+20kg coal)

9926000014 ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT No.

14 COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK No.

15 WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

9926000016 STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT ONE

DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING COND

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

18 9926000018 TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER EARTHING No.

COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE CABLE

19 9926000019 FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER EARTHING No.

COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF POLE/ GUY ETC. No.

AS PER STANDARD SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST EXCAVATION

OF PIT UNDER NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE EARTHING

WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING AND TELEPHONE No.

LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

26 9926000026 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, No.

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

27 9926000027 STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH,

FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

29 9926000029 CLIMBING DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

9926000030 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV & LT LINES INCLUDING FIXING ONE

OFINSULATORS, BINDING JUMPERING ETC. COND

9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIXING OF INSULATORS, ONE

BINDING JUMPERING ETC. COND

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

32 9926000032 FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTI-CLIMBING DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING OF No.

POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING OF No.

POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER) WITH

35 9926000035 CREDITING OF FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT TRANSFORMER) WITH

36 9926000036 CREDITING OF FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING No.

TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR

37 9926000037 ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH KM

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

38 9926000038 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON KM

AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION

BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY ENGINEER IN

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

41 9926000041 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON KM

AERIAL BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION

BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

42 9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL TO STORE No.

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITHOUT TRANSFORMER)

43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR No.

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR No.

CREDITING TO DEPARTMENTAL STORE

9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING OF ALL ACESSARIES KM

AND FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTING OF ALL ACESSARIES

AND FABRICATION TO DEPARTMENTAL STORE

9926000047 DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF ALL ACESSARIES KM

TO DEPARTMENTAL STORE.

9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES ONE

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. COND

9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING JUMPERING ETC. ONE

9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE PROVIDED BY No.

9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD BE CREDITED TO No.

SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COIL WILL BE PER CT

PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND OLD CT SHOULD

BE CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

56 9926000056 LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE PROVIDED BY DGVCL) No.

57 9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE PROVIDED BY DGVCL) No.

9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLE TO BE No.

PROVIDED BY AGENCY)

9926000059 LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL CONNECTION WITH PROPER SIZE OF PER

LUGS. (LUGS COST IS BORNE BY AGENCY) TERMI

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD BE SUBMITTED PER

TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN PER- DTR

FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT SHOULD BE SUBMITTED PER

TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READING PARAMETER IS NOT DTR

SHOWN IN METER)

9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF 1.5SQ MM SINGLE No.

62 STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER), TERMINATION IN METER & COIL

ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER & COIL ETC. No.

(WITHOUT 10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV Resistance) with using PER

95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B) SET

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with replacement of bare conductor by HT

65 9926000087 ABC conductor (DO bottom side to transformer) after removal of semi conductor by HT ABC (6 inch both side). HT ABC

to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In- Cage (Pic) Type, Earth

66 9926000088 Electrodes for HT Feeder Pole Having 2000 mm Electrode Length as per the Tender Specifications and Drawing. (All NO

Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In- Cage (Pic) Type, Earth

67 9926000089 Electrodes for HT Feeder Pole Having 3000 mm Electrode Length as per the Tender Specifications And Drawing. (All NO

Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-100 microns without any

joints or welding. Both the end of the GI strip should be connected with GI nut bolts and required fabrication work for

giving separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately 25 meter GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge) (All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip with UV protected Cable Ties

69 9926000092 of 550 X 7.6 mm size to bind with pole face(Approximately 25 meter uPVC pipe for GI strip covering per transformer Meter

centre -as per requirement and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar (12 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar(15 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather resistant, Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID to OD. (All Materials will be supplied by Agency)

9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) including LT (1.1 kV) insulating No

taps. All live part at LT side shall be covered with fixing of LT insulating taps.

74 Nylon Net around Transformer Center

75 9926000097 Nylon Net (12 * 15 ft) Per Net

76 9926000098 Nylon Dori Per TC

77 9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be provided by DGVCL) Per TC

9924000001 Cutting of Tree branches surounding HT/LT line Per

79 9924000002 Replacement of old jumpers & providing new double jumpers with 8" binding [D Type] & capsuling with PVC pipe etc No.

80 9924000005 Support pole for Stay PSC/STP/RSJ No.

81 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

82 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No.

83 9924000008 Pin binding of conductor LT shakel insulator No.

84 9924000009 Replacement of one/both disc.insulator at strain pole No.

85 9924000010 Replacement of LT shackle insulator at cut point No.

86 9924000011 Refixing of V cross Arm No.

87 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

88 9924000013 Refixing of Top fitting in proper position No.

89 9924000014 Replacement of Top fitting No.

90 9924000015 Replacement of LT cross Arm No.

91 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

9924000017 Numburing of pole with paint by preparing back ground of one colour and have lettering(height 3" * width 0.5") using No.

93 9924000018 Fixing of MMB(1PH.) at consumer end No.

94 9924000019 Fixing of MMB(3PH.) at consumer end No.

95 9924000020 Replacement of (1ph.) meter for Urban area No.

96 9924000021 Replacement of (1ph.) meter for Rural area No.

97 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No.

98 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No.

99 9924000024 Replacement of deteriorated Single phase Service line No.

100 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No.

101 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

102 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

103 9924000028 Painting of steel fabricated material of RSJ pole mounted transformer double pole structure with paint No.

104 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

105 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

106 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

107 9924000032 painting of steel fabricated material of PSC double pole at pole mounted transformer with paint No.

108 9924000033 Providing line seperater single phase No.

109 9924000034 Providing line seperater three phase No.

110 9924000035 Replacement / Providing of stay insulator along with adjustment of tension in stay wire No.

111 9924000036 Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity & crediting it to store. No.

112 9924000037 Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity & crediting it to store. No.

113 9924000038 Adjustment of tension in stay wire No.

114 9924000039 Refitting of LA No.

115 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. location

116 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

117 9924000042 replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new double pin binding No.

118 9924000043 Providing 11kv double disc insulators with binding & restringing No.

119 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding

120 9924000046 Plumbing of PSC Pole with straightening at pin point No.

TOTAL ESTIMATE PART A

992500003 Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x 240 mm2 size

1 XLPE cable as per DGVCL technical specification)

992500003 Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x 240 mm2 size XLPE

2 cable as per DGVCL technical specification)

992500003 Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x 240 mm2 size

3 XLPE cable as per DGVCL technical specification

124 Labour charges for Lying of O/H XLPE cable pole to pole KM

992500002 Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV

0 3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after removal of semi

conducting layer and applying of PVC heat shrinkable anti- tracking core insulating tubing (1.1KV), on

992500002 both end terminal using Aluminium long barrel heavy duty up to 240 sq mm lugs, Aluminium bus

4 connector. Taping with PG- clamp for bus conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT insulating tapes.(11KV/22KV

XLPE cable will be in scope of DGVCL while all other materials will be in bidder's scope)

992500002 Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-

5 charge.Test result shall be submitted by contractor with bill.

992500003 Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x 240 mm2 size XLPE

0 cable as per DGVCL technical specification

129 9924000047 Plumbing of PSC Pole with straightening at tension point No.

130 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

131 9924000049 Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper, binding, lugs etc Set

132 9924000051 Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding, lugs etc Set

133 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per pole

134 9924000053 Labour charges for replacement /providing of MMB & service with all accessories for three phase connection No.

135 9924000054 Labour charges for replacement /providing of MMB & service with all accessories for single phase connection No.

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all fabrication & creditig the old

material to store

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be filled with salt

992500001 & coke and construction of chamber as per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit

6 should be joined with cable by G.I. strip of size 1” width & 2 mm thick. All material GI pipe, Coke, Salt

etc will be supplied by bidder.

992500001 Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x 185 mm2

7 size XLPE cable as per DGVCL technical specification

992500001 Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV

8 3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

992500001 Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x 185 mm2 size

9 XLPE cable as per DGVCL technical specification)

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal 10kg each, including pvc rigid

141 9924000064 pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. wire at consumer end with all materials, earth resistance No.

should be less than 2 ohms

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and inclusive of dismantling

142 9924000065 charge of existing bare conductor and crediting in to store & dismentaling of service line from LT bare conductor and to KM

provide service connection on Aerial Bunch Cable by insulated pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and inclusive of

143 9924000066 dismantling charge of existing bare conductor and crediting in to store & dismentaling of service line from LT bare KM

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing connectors through service

connection box complete as required & directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle point,jumpers etc. and inclusive of

dismantling charge of existing bare conductor and crediting in to store complete as required & directed by Engineer in

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle point,jumpers etc. and inclusive of

dismantling charge of existing bare conductor and crediting in to store complete as required & directed by Engineer in

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and inclusive of

146 9924000069 dismantling charge of existing bare conductor and crediting in to store & dismentaling of service line from LT bare KM

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing connectors through service

connection box complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e. special design

147 suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and KM

inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of

service line from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated

pierceing connectors through service connection box complete as required & directed by Engineer in

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

992400006 messenger wire and inclusive of dismantling charge of existing bare conductor and crediting in to store &

6 dismentaling of service line from LT bare conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service connection box complete as required & directed

by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e. special design

992400006 suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle point,jumpers

7 etc. and inclusive of dismantling charge of existing bare conductor and crediting in to store complete as

required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e. special

992400006 design suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle

8 point,jumpers etc. and inclusive of dismantling charge of existing bare conductor and crediting in to store

complete as required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

992400006 messenger wire and inclusive of dismantling charge of existing bare conductor and crediting in to store &

9 dismentaling of service line from LT bare conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service connection box complete as required & directed

by Engineer in Charge.

Testing of cable at various points and commissioning

5 the feeder as per instruction of engineer-in-charge.Test No.

result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout

992500002 drawings with GIS mapping as per actual cable Set

routing showing road crossing, HDPE pipe sleeving,

jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium sheet size 750x300 mm

(2.5 x 1ft) rectangle, as per design, pre treated with phosphate process and acid etching coated with one

coat of epoxy primer and two coats of best quality paints, refloctrorised with Hi-Intensity retro – reflective

992500002 sheeting as per the latest and frame fabricated from suitable size iron angle. The Sign Board is to be fixed

7 on the base prepared from channel and bracing angles which is grouted by means of cement concreting of

1:2:4 for size of 300 mm dia x 800 mm height (500 mm to be grouted in ground). The details to be

displayed on sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per design, pre treated with phosphate

process and acid etching coated with one coat of epoxy primer and two coats of best quality paints,

155 refloctrorised with Hi-Intensity retro-reflective sheeting as per the latest and frame fabricated from suitable No.

size iron angle. The Sign Board (Danger Board is to be fixed at the location as per instruction of In-charge

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium sheet along

992500002 with 1.0 mm dia aluminium binding wire for fixing of aluminium tag near end termination joint at DP

9 structure for identifyng the cable. The details of feeder i.e. 11 / 22 KV with feeder name shound be

punched on the tag by letter punch of size 16 mm as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for

0 11kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for

1 kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for

2 11kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification)

Supply & fixing of heat & shrinkableend terminations (indoor) for

3 kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification

Supply & fixing of heat shrinkable straight through joint for 11kV 3C

4 x 240 mm2 size XLPE cableas per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint type for 22kV

5 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot (HT Side 11/22KV, LT

Side 1.1KV) including 11/22 KV insulating taps and L.T.(1.1 KV) insulating taps ,Busbar, Tapping from

Bus Bar (11/22 KV XLPE cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing of jumper and providing & fixing of Heat Shrinkable Anti

992500004 Tracking Core Insulating Tubing (Insulation Level 11/22 KV) in H.T. jumper , Clamping arrangement of

6 cable support frame on both side of existing Over Head type Distribution Transformer to utilize in Under

Ground cable network as per drawing & as per instruction of Engineer incharge. All live parts i.e. PG-

Clamp, connections of D.O.fuses, HT bushings etc . shall be covered with fixinng of 11/22 KV HT

insulating tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL while all other materials will be in

bidder's scope ) .

992500004 Cable

164 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open space

165 Labour charges for Lying of O/H XLPE cable pole to pole KM

166 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round pipe No.

TOTAL ESTIMATE PART B

1.DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the relevent

ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated materials of

RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Total Amt PART A+ PART B

Amt In Words : Twenty Seventy Lacs, Final Order Value.

Executive Engineer (O&M)

DGVCL,Kadodara Division.