Loading
Loading…
Loading…
Tender ID
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.0 LAdmitted-Finance NOT AVAILABLE | L1 | Admitted-Finance | ||
| 2 | L2₹5.1 L+₹10,124.06 (2.02%)Admitted-Finance HIMACHAL PRADESH | L2 | Admitted-Finance |
Tender Value
₹5.1 L
EMD Value
₹10,100
Closing Date
16 Apr 2026, 10:00 amClosed
Executive Engineer Mandi Divn.No.I HPPWD at Padhar
Executive Engineer Mandi Divn.No.I HPPWD at Padhar
Providing and Fixing Prepainted sheet roof on Minor O.T. at Barot and Construction of Boundary wall)
2026_PWD_133778_1
. PW-MDI(P)Tender-NIT-384-419 dated 07.04.2026
Open Tender
Civil Works - Others
Percentage
31 days
Barot
As per bid documents
9 documents required · 9 mandatory
₹350
₹10,100
10 Jun 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres Recovery of useful Servioceable Material of 230.40kg. (Two Hundred Thirty point Forty Kilogram) @ Rs. 25.00/- (Twenty Five only) per Kilogram amounting to Rs. 5760/- only shall be done on prorata basis for the quantity of dismantling material in the Building work effected. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him lead as per direction of Engineer - in- charge | - | Per cubic metre | - | - |
| 2 | Provicing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 3 | Provicing and fixing ridge or hips 60 cm overall witj 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 6 | Construction of Embankment with material obtained from Borrow Pits. Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m transporting to site spreading, grading to recumed slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5 complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 7 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (Twenty miliimetre) nominal size) complete with all accesoriees as required as per the direction of Engineer-in-charge. | - | Per cubic metre | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
cancelled_1.PDF
pdf • 0.15 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_197775.xls
BOQ • 0.34 MB
SBD.pdf
Tender Documents • 5.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .