WBIW/SE/CE(S)/NIT-04e/2025-26, SL 02

Supplying to site and pitching with 1st class kiln burnt or picked Jhama bricks including dressing, ramming and preparing bed to proper slope complete with necessary earth work not exceeding 300 m.m. in depth and filling gaps with powdered earth or local sand etc. complete ( The rate is including cost of sand). i) With 1st class kiln burnt brick a) 20.00 cm thick

Labour charges for relaying and replacing the displaced dry brick pitching by old bricks including dressing and preparing bed with necessary earth work upto 30 cm depth complete including filling gaps with powdered earth or local sand, including collection of bricks within a lead of 50 metre and finishing the same as per direction of the Engineer - in - Charge. a) 20.00 cm thick

Making sausages Square or Rectangular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside with 10 S.W.G. galvanised square pattern (internal dimension of mesh will be 100 m.m. x 100 m.m. square) galvanised wirenet caging with proper lapping of minimum 150 m.m, and sewing with 12 S.W.G. galvanised wire including cost of all materials, carriage upto site, placing and laying the same in position, after preparing the bed to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces.) i) 0.75 metre x 0.45 metre nominal section

Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile.

Extra rate over Item No. 4 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 m. (i) Three Extra Lead

Extra rate over Item Nos. 4 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. (i) 1 (one) extra lift.

Earthwork supplied by boat within a lead of 8.0 KM & all lifts for making embankments or for repairs to embankments, closing breaches or for any other purposes including loading, transporting, unloading and spreading in layers of 25 cms as per profile, all lifts bothways and head load including breaking clods, rough dressing ramming etc. complete as per direction of Engineer-in-charge. (measurement will be made on the basis of pre-work & post-work section / stack measurement with due allowance of shrinkage). No extra payment will be made for stacking.

Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooden malllet after laying to achieve designed section as per direction of the Engineer- in - Charge (measurements will be on finished work / in stack after deducting necessary void).) (b) 1st class brick ballast

First class Brick work in cement sand mortar in steining of well, pier, abutment, wing wall, parapets cross drain. H.P. culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials. (a) In 1:4 proportion. Cement Used - PPC/PSC/OPC(33 Grade)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar. (a) 20 mm thick plaster. Cement Used - PPC/PSC/OPC(33 Grade)

Making cubical bamboo porcupine cages with bamboo of 60 mmto 75mm dia. having length of 2 metre each for all horizontal and vertical struts and 2.8 metre length for diagonal struts, 3 nos horizontal and 3 nos vertical struts should be placed equi-distant from each face to make the square cage of outer dimension 75 cm x 75 cm and projecting each strut by 60 cm on all directions. Two nos dioganals or cross bamboo posts should be placed on each face having their centre tied with the centre of cage properly including fitting, fixing corners, vertical, horizontal and diagonal struts with iron nails not less than 20 cm long and tying corners with 16 SWG galvanized iron wire, filling the cages with 1st class kiln burn Brick @ 80 nos bricks per cage. Cages builts with 10 SWG hexagonal or square pattern 10 cm mesh, with proper lapping, tying and sewing with 10 SWG GI wire including cost of all materials, carriage to site and laying the same in the bed or slope of the river complete as per direction of the Engineer - in - Charge. ( N.B::- If G I wirenetting is not considered then Rs. 348.00 per cage may be deducted from the following costs, towards cost of wire netting including OH and contractor’s profit .) For cages of size 75cm x 75cm x 75cm with 1st class kiln burn Bricks (a) Single cage.

Extra rate for items above for dumping by boat in flowing water including cost of hiring of boat, boatman, loading into boat and dumping in specified location including all other equipments etc. complete as per direction of the Engineer-in-charge.

Supplying at site the following materials including carriage Overhead Charges and Contractor's Profit (I) 8,10,12 SWG G I Wire.

Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. (d) Soling or dry pavement with one brick-on-edge laid in herring bone pattern over a layer of brick flat (thickness 125 mm plus 75 mm)

Labour for taking out old soling edging including removing debris (b) Double flat soling

Labour for laying soiling with departmental bricks including carriage of departmental bricks within a lead of 150 metres preparation of bed as necessary with brick joints properly filled in and packed with brick joints properly filled in and packed with local sand or powdered earth and including necessary cushion of similar materials below the soling (and in between layers when more than one layer is used) (d) Soling or dry pavement with one brick-on-edge laid in herring bone pattern on a layer of brick flat (thickness 75 mm. plus 125 mm)

Supplying, testing and installation of open Weave Jute Geo-textile (JGT) having overall weight of 500 gm/sq. m, thickness 6 mm, width 1220 mm, Tensile strength 10 KN/m (Warp direction) × 7.50 KN/m (weft direction) on slopes of embankments dressed and cut to a gradient as per design and drawing for control of surface soil erosion on proposed bank slope of embankment including the cost of preparation of sub grade and excavating the trenches of 500 mm deep and spade-width wide where necessary, and filling the trenches with earth duly secured to sub-grade by U shape MS staples (11 gauges) or wooden or plastic pegs at an interval of 450 mm, providing side lapping of 100 mm and horizontal lapping of 300 mm as per direction complete.The rate is inclusive of all incidental charges, transportation by all means to the work site, all leads and lifts complete. (Payment will made on the basis of finished surface area of the slope).

Turfing with chorkata or durba grass sods 5 cm. to 8 cm. thick in slope, crest berm etc. of embankments, canals and drainage channels etc. within a lead of 150 metre and all lifts including fine dressing, watering, ramming, guarding etc. complete. (sods will have to be arranged by the contractor at his own cost. Payment to be made on the grown grass only).